BD Diesel Performance Exhaust Manifolds
- Increases Exhaust Flow
- Lower EGT's (Exhaust Gas Temp)
- OEM Fit
- Improves Fuel Economy
BD Diesel offers engine exhaust manifolds for Chevrolet and GMC Duramax 6.6L Diesel and Dodge Ram Cummins Turbo Diesel 5.9L engines. Easily remove the final restriction in your exhaust system by replacing your factory exhaust manifold with a BD Power exhaust manifold. Dyno testing has shown that these flow more efficiently and will increase power, lower exhaust gas temperatures (EGT's) and improve your fuel economy. BD Diesel performance exhaust manifolds are the perfect solution for getter performance gains, especially when adding other performance enhancing modifications.View Available Part Numbers For This Product Line
- For Dodge Ram 88-98 12 Valve & 98-02 24 Valve & 03-07 5.9L: Horsepower creates heat pure and simple. On a high-output engine like the Dodge-Cummins, high exhaust gas temperature (EGT) is enough to cause the stock exhaust manifold to crack. BD's New Pulse Manifold for '88-02 applications (two-piece offset Pulse available for '03-06 applications) is cast from high-silicon ductile iron, which can withstand extremely high temperatures, as well as the additional weight created, by bigger single or twin turbo systems. Two expansion joints allow the manifold to expand and contract without cracking or exhaust leaks. Of course, the Pulse wouldn't be a BD product if it didn't offer the benefit of improved performance. As its name would suggest, this manifold is pulse-tuned for more efficient combustion chamber evacuation and higher exhaust flow. The result is quicker turbo spool-up, reduced backpressure, more power and better fuel economy. All Pulse exhaust manifold kits come assembled and are complete with stainless steel hardware to resolve the issue of loose or lost fasteners (gasket kits available separately). Add a BD X-Hale exhaust system for even greater performance gains!
- For Chevrolet / GMC Duramax 6.6L: Improve exhaust flow, reduce exhaust gas temperature (EGT) and realize greater power gains with the new "Full Bore" driver's side exhaust manifold for the '01-'07 GM Duramax. You may not know it, but the factory driver's side manifold is pinched down to allow clearance for the steering shaft, which actually isn't required. As a result, this manifold flows 80% of the passenger side manifold. The BD Full Bore exhaust manifold restores exhaust flow to match the passenger side, and is a direct, bolt-in replacement for the factory part (GM gasket required). The BD Full Bore manifold is made from high-silicon ductile iron to resist cracking from high temperature and vibration, and is even tapped to accept the most popular EGT probes. The BD Big Bore exhaust manifold is a great compliment to BD's new SuperMax turbo upgrade kit and stainless steel X-Hale exhaust systems.
InstallationThis product offers an easy, at home no drill installation. The installation manual is clear cut and easy to read. For additional information, please see the installation manual below. You may also call us toll free at 1-866-309-1907 or 701-253-5906.
|BD Diesel 1045987 Installation Instructions|