| Customer Rating |
Product |
 |
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Wayne W. (Livingston) on 08/2009
I installed this on my 2007 Silverado 2500 HD 4x4. It took about 30 minutes for the first one, but I installed the other side in about 15 minutes. It is better to put the step onto the hanging bracket first and then bolt onto truck. I used lock nuts instead of the nuts that came with it. Also, used some lock tight. The step could be a little bigger, but one is not going to stand there all day. I would recommend this to anyone who can not reach down into their toolbox or bed.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Timothy B. (Salisbury, NC) on 07/2009
I put these side steps on my 2002 Ford F-350 Super Duty Dually. Took me a while to figure out the instructions, but when I did, it was a breeze. Very good construction and heavy duty. Look great. Highly recommend.
|
 |
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Foston C. (Raleigh) on 07/2009
The Bully truck bed side step is a good idea. However, on my Ford F250, it can only be mounted close to the cab. I had to build an additional crossmember beam of angle iron to mount it close to the rear tire where I wanted it. Still, a very good product.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Lisa N. (Wellsville, NY) on 05/2009
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:George B. (Warrior, AL) on 05/2009
The side step was easy to install and works perfectly. I have purchased several items from real truck and have found their products to be as advertised.
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Arthur E. (Atlantic City, NJ) on 04/2009
i thought the step would be a little larger. but this works just fine
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Donald D. (Bohemia, NY) on 03/2009
Part went on easily and works great.
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Randy B. (Roland, OK) on 02/2009
step should be longer as is you have to drill hole
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Paul F. (West Chester) on 01/2009
Quick and easy install and appears to be stout enough to last years. Handy to have for my deep toolbox. Reccomend highly.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Rick C. (Terrell, TX) on 01/2009
Great product, outstanding design, easy installation. My friend called these "Little Man" steps at first but after he's seen mine in action, he's buying them for himself. I'm actually 6'3" but still had a hard time reaching the bottom of my toolbox. I drive a 2008 Ford F150 Supercrew 4x4 with 18" wheels. In addition to the height related to that set-up, Ford's sidewalls are a couple of inches higher than others' and these steps are really handy.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Jane S. (Boonville, MO) on 01/2009
It's great--and easy to operate.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Sheila I. (Houston, TX) on 01/2009
I was very pleased with the steps ordered. They were received promptly and were very easy to install. I did it myself!
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Andrew P. (Marquette, MI) on 09/2008
good product. step area is a little small but works ok.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Leroy D. (Blaine, WA) on 09/2008
When you have a Heavy duty Pickup and need to get into the box these steps make your 3/4 4X4 into a half ton wheel drive. As easy as pulling a lever. thank
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Richard D. (Escondido, CA) on 08/2008
Needed a threading wire to get the mounting screw and plate in the bed mounting channel hole (that I had to drill, but no problem with that). I got one with the front mounting 2 inch receiver kit I previously ordered, and it worked fine with the side steps.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:David L. (Sebastopol, CA) on 08/2008
I love these steps! I put one on each side of my F150 in less than an hour. Instructions were easy to follow and I had to drill only one hole. They are extremly well built, they should outlast both me and the truck. I wish I had done this years ago. Definately worth the money.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Gary L. (Wyandotte, MI) on 07/2008
This product was made to be installed by anyone who can turn a wrench,I have found that it has already paid for itself. I must get one for the otherside of my truck. RealTruck rocks for speed of delivery and quailty products for the trucker
thank you
G. Lauber wyandotte, MI.
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:John T. (Charlotte, NC) on 07/2008
i installed steps on each side of the rear tire wells for a total of 4 steps. i needed to be able to access into the bottom of my crossover tool box as well as my side mount tool boxes and these steps allow me to do this. the construction of the steps is very good and the rotation action allowing the step to "fold" away is excellent. the only problem i encountered was mounting the 2 steps in front of the rear tire wells. no crossmember is in place on my 2004 f-150 (where the step is intended to install). i fabricated brackets to allow this attachment. the steps behind the rear tire wells installed very easily and in the proper location for my needs. the steps are rated for 300 lbs. and they handle 200 lbs adequately. 300 lbs., in my opinion, is definitely pushing their limit.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Roger V. (Altamonte Springs, FL) on 07/2008
Easy to install. Works well.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Roger V. (Altamonte Springs, FL) on 07/2008
Easy to install. Works well.
|
|
3/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Gary W. (Hollis Center, ME) on 06/2008
Step does not work very well with a F350 Dually. There is only about 3 inches left to step on after it comes by the fender flare. When I ordered this did not see anything that said it did not fit the dually.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Don K. (West Chicago, IL) on 05/2008
looks good, but have not installed it as of this time
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Keith M. (Yorktown Heights, NY) on 05/2008
Installed on a Chevy Silverado 2002 regular cab long bed. I wanted a stepup for my girlfriend to get into the tool box on the pass. side but I didn't want to lose clearance by installing running boards. these flip away and preserve clearance for a heck of a price. Took a bit to install (30 minutes) but I tend to be finicky and want to get the bolts set just right. Once installed I liked it so much I bought another for my side of the truck. The only pain is getting the first screw in to hold up the assembly, once that is threaded you are in a good spot for the rest of the operation. Anyway, holds sufficient weight and feels solid to me at 192lbs. If you need a step up to get in a deep tool box or the bed than this fills the order for both sides of the truck for under 100$. Can't beat that!
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:George W L. (Hilliard, FL) on 05/2008
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:George W L. (Hilliard, FL) on 05/2008
|
|
3/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Greg M. (Custer, WA) on 04/2008
Quality, of the step and mounting bracket, is very good and reasonably priced. I had to drill a hole, to mount the step on the left side, of my '05 superduty.
The step functions as advertised. When "closed", it is hardly noticeable. When stepping on it (225#), the feel is not as solid (some flexing of the vertical bracket and bed cross member sheet metal)as stepping onto the running boards or rear bumper. Time will tell, about durability.
Overall, it provides a very real and useful function.
|
|
4/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Tom J. (Lompoc, CA) on 03/2008
Very Sturdy. Does what it is supposed to. Was a little more difficult to install than I anticipated. Seems a bit overpriced.
|
|
5/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Michael M. (Alamosa, CO) on 03/2008
Super-simple installation and I can finally reach things in my tool box.
|
|
3/5 for PIT-AS-550Z - Bully Pickup Truck Bed Side Step
Posted By:Becky D. (Colorado Springs) on 03/2008
This step is really well built, sturdy, and easy to use. I wanted this step to help hitch up my 5th Wheel Trailer. I have a 07 Dodge Ram 2500 and after installing the step I was a bit disappointed that it was placed so far toward of the front of the bed then I expected. The installation was fine and directions (yes directions) were clear. I installed this myself and being a 55 years old woman - I found it pretty easy.
|
8 Reviews
Starting at: $71.99
button.
