Draw-Tite Rear Class I Receiver Hitches - Sport Frame

Description

Draw-Tite Towing & Trailer Class I Rear 1-1/4" Sport Frame Receiver Hitches for Cars, Sport Utility Vehicles and Mini Vans. Draw Tite Class I Receivers have a gross trailer weight capacity up to 2,000lbs and a tongue weight of up to 200lbs. Featuring 1 1/4" Receiver Tube Opening and includes the draw bar ball mount with hitch pin and clip. Premium E-Coat Black Powder Coated Finish and Backed by a Nationwide Limited Lifetime Warranty. 24XXX Series Hitches by Draw Tite Hitch Company.

Features

• 2,000lb Rating:  Economical Class I Receiver Style Hitch Rated up to 2,000 lbs. (GTW) Weight Carrying (WC) & 200lb Tongue Weight
• 1-1/4" Receiver:  1¼" Square Receiver Tube Opening
• Includes Ball Mount & Hitch Pin:  Comes complete with Removable Drawba, Pin and Clip
• Attaches to Frame &/or Bumper:  Installation Instructions are clear cut and easy to understand.
• Premium E-Coat Finish:  Black Powder Coat Finish
• Solid All-Welded Construction: For Maximum Strength and Safety.  Computer-Aided Design and Fatigue Stress Testing.  Designed to Withstand Road Abuse Within Specified Capacities.
  Made Model Specific:  Custom Built According to Manufacturer & Model Year which Ensures Perfect Fit and Top Towing Performance
• Nationwide Warranty:  Backed by a Draw-Tite Nationwide Limited Lifetime Warranty

Order Notes

AF= Hitch is ONLY rated for Weight Carrying at 3,500 lbs. GTW, 350 lbs. TW and DO NOT use w/Weight Distribution Spring Bars for this Specific Vehicle. Except for long bed pickups.
AG= Drawbar Kit & Accessory Adapter sold separately.
AI= Additional installation time required.
AL= Additional installation time required for vehicles equipped with load leveling compressor.
AM= Not recommended on Trofeó models prior to 1989. 1989 units require minor fascia trim and exhaust repositioning.
AO= Will not fit vehicles with twin tailpipes.
AV= Ball mount shank must be 12" long.
AW= Will not fit Turbo models.
AY= Does fit SE models with Sport Appearance Package, GT model or 4 Dr. STE.
BC= Hitch rated at 1,500 lbs. GTW, 100 lbs. TW
BF= Requires standard bumper. Will not fit with step bumper.
BG= Does not fit models with 3 piece step bumper.
BH= Cannot be installed on vehicles without bumper.
BJ= V-6 engine option only.
BK= For vehicles without bumper, #2879 must be used (Sold separately).
BY= Minor repositioning of muffler required.
CA= Models with dual exhaust require exhaust modification.
CC= Requires minimum of 19" from end of frame rail to spring shackle bracket.
CK= Drawbar installs though fascia on SC models. Obtain customer approval.
CM= OEM Style Attachments/Requires Factory Bumper For Hitch Installation.
CN= Requires OEM factory bumper for hitch installation.
CO= Will not fit 8 ft. 2500/3500 Series with heavy-duty suspension or four door Crew Cab.
CP= Fits All Models without Factory Installed Receiver.
CQ= Will not fit with heavy duty suspension.
CR= Fits with mini spare tire stowed under vehicle. Will not fit with full size spare.
CS= Will fit with full-size spare tire stowed under vehicle.
CT= Will not fit long bed models after 1999.
CU= Includes models with large fuel tank and skid shield.
CV= Will not fit short wheel base with dual exhaust.
DA= Will not fit with tube style bumper.
DB= Will not fit 6 ft. bed pickups.
DG= 1971-77 (Standard) Van: Will not fit with optional large gas tank. 1974-77 (Maxi) Van: Includes models with optional large gas tank.
DH= Cannot be installed on 1987-97 vehicles with factory step bumpers unless step bumper and its mounting brackets are permanently removed and standard factory bumper is installed.
DI= All models with metal bumpers.
DR= Additional installation time required for vehicles equipped with skid shield.
DS= Use #75151 On 1500 Models Built After 11/1/02. Use #75135 On 1500 Models Built Before 11/1/02.
DU= Fascia removal required.
DV= Will not fit short wheel base models.
DX= Requires six 3/8" spacer blocks (#01077-011) and six 1/2-13 x 2-1/4 GR5 carriage bolts (#01266-009) which are not provided (Sold separately).
DY= Use On 1500 Models Built After 11/1/02.
EB= Factory electrical bracket will NOT fit with this hitch. Must use aftermarket electrical box or bracket.
EE= Fascia trimming required on '91 and earlier GLS models. Not recommended on '92 GLS models due to excessive fascia trimming.
EF= Fits all models with standard bumpers.
EG= Relocation of spare tire bracket is not required. NOTE: 19mm open end style wrench must be purchased to allow removal of spare tire after hitch installation.
EK= Extended Cab only.
EO= Requires longer ball mount.
EP= Fascia trimming required.
FB= Will not fit vehicles fitted with optional 31" tires stowed under vehicle.
FE= Fascia trimming required. Allow additional installation time.
FM= On vehicles equipped with load leveling device, air pump mounting modification required.
FN= Will not fit vehicles equipped with air suspension.
FP= Spare tire repositioning and/or modification of spare tire carrier may be required.
FR= Will not fit Extended Cab w/stationary side window.
FS= Includes 2 & 4 WD models with heavy duty suspension.
FT= Models with 16" spare tire must be relocated.
FV= 2003 Models w/Build date after 11/1/02.
FW= 2003 Models w/Build date before 11/1/02.
FX= Fits vehicles with spacer between E/A unit and frame built before Jan.'93 and after Mar.'93.
FZ= Fits vehicles with E/A unit only. Not vehicles with 1/2" circle stamping in place of E/A unit.
GF= Drilling required only on vehicles with load leveling compressor.
GH= Will not fit models with 34" wide frames.
GK= Vehicles with step bumper require optional drawbar #36063/64.
GO= Requires hitch with packaging date code 2/15/94 or later.
GP= Hitch crosstube concealed behind bumper.
GU= Will not fit vehicles with factory or aftermarket lower Fascia/Rollpan or Tube Bumper.
GW= Spare tire cannot be stowed under vehicle on short wheelbase models equipped with 15" tires or full size spare.
GX= Requires fabrication of "L" bracket to reposition exhaust on '95 and later 6 ft. box models.
HA= External dress panel beneath 95-97 and 03-05 vehicles must be removed for hitch installation.
HB= Slight fascia deformation may occur on some models.
HC= Will not fit with mini or full size tire stowed under vehicle.
HD= Will not fit 6 ft. bed pickups except 6 ft. Super Cab.
HK= Under vehicle spare tire stowage may be retained with installation of an aftermarket spare tire repositioner. Cutting of rollpan in license plate area required for receiver tube access. Does not fit with bumper.
HM= Hitch crosstube is visible beneath bumper.
HP= Requires four (4) 7/16" x 1" x 2" spacer blocks (#01080-012) for installation. (Sold separately)
HQ= Universal bike rack required.
HR= Requires drilling of heat shields on V6 models.
HX= Minor exhaust modification may be required.
HY= Ultra Frame ball mount #4283 cannot be used in rise position on vehicles with step bumpers.
I= Hitch is positioned further rearward to accommodate spare tire.
J= Under vehicle spare tire stowage is retained.
JF= Will not fit with 16" spare tire.
JL= Installation requires OEM bumper and brackets.
JR= Exhaust must be temporarily lowered for installation.
JS= Will not fit 1999-2004 Cobra SVT.
JT= 2WD models only.
JU= License plate relocation required to install hitch, see 5443. (Sold separately)
JV= Rubber air deflector/fascia must be removed or trimmed to install hitch.
JW= 4WD models only.
JX= Requires factory tow hooks for installation on 2WD models.
JY= Extensive fascia cutting required on models w/fog lamp option.
JZ= Requires factory stabilizer (anti-roll) bar for hitch installation.
K= Adapter kit (#1685) required with #41504 for 1980 and later F-Series pickups.
KA= Gasoline engine models only.
KB= Diesel engine models only.
KC= Does not fit 2500/3500 2WD (C-Series) models w/8 lug wheels.
KD= Fits 2500/3500 2WD (C-Series) models w/8 lug wheels only.
KE= Does not fit 88-91 4 Dr. Crew Cab models.
KF= Will not fit Flareside.
KG= Skid shield must be removed if present.
KH= Minor heat shield modification may be required.
KI= Optional OEM Fog Lights must be removed for receiver installation.
KK= When installing on a vehicle originally equipped with an OEM hitch, OEM bumper brackets must be purchased and installed prior to new hitch installation.
KL= Hitch is designed to attach beneath the OEM hitch.
L= Exhaust repositioning required.
LT= Requires removal of factory hitch if equipped.
M= Will fit with heavy-duty suspension.
MB= Will not fit models equipped with air suspension package.
O= Will not fit vehicles equipped with dual exhaust exiting below the bumper.
Ø= Uses all existing holes, no drilling required.
OE= Vehicles Must Have O.E.M. Trailer Hitch Installed.
P= For 124" wheelbase and E350 models, adapter kit (2626) is required. (Sold separately)
PA= Will not fit 124" wheelbase or E350 models.
QN= Requires 80220 ball mount purchased separately.
QP= Will not fit vehicles with backup sensors built into rear bumper.
QT= Drilling required on vehicles with load leveling compressor or long wheelbase models.
QU= Cargo carrier will NOT fit.
QV= Requires 60005 drawbar purchased separately.
QW= Will not fit vehicles with dual exhaust.
QX= Requires 90002 drawbar purchased separately.
QY= Removal of heat shield required.
QZ= Will not fit Euro models with single muffler with twin tailpipes.
RA= Do not install on early 1996 models equipped with M10 fasteners.
RB= Hitch installation can be made easier with a "cutter" type drill bit.
RC= Will not fit with rear sport bars.
RE= Requires 64-8601 tab nut kit. (Sold separately)
RF= Various conversion vans may require the use of drawbar # 90005 (sold separately) for added ball height.
RG= Vehicles with P235/75-R15 or larger spare tires will NOT retain spare tire under vehicle.
RH= Vehicles with 31/10.5/R15 require 90003 drawbar purchased separately.
RI= Cutting of rollpan in license plate area required for receiver tube access. Obtain customer approval first.
RJ= Short box models with 31/10.5/R15 spare tire will NOT retain under vehicle spare tire storage.
RK= Fits vehicles with factory and some aftermarket rollpans.
RL= Short box models require relocation of spare tire.
RM= Will not fit Extreme package.
RN= Aftermarket spare tire repositioner may be used on 8 ft. bed models to ease installation of larger spare tires.
RO= Will not fit Silverado SS.
RP= Relocation of emergency brake cable holder may be required on 1990-1995 models.
RQ= Will not fit models with short bed and regular cab.
RR= Minor modification required on vehicles with 16" spare tire.
RS= Modification or relocation of bumper mounted OEM 4-Way flat bracket is required.
RU= Sits 2-1/2" below bumper.
RV= Requires 80230 ball mount purchased separately.
RX= Will not fit vehicles with formed bumper brackets inside the frame.
SA= Requires drilling on 6 ft. bed models.
SB= Will not fit models with short bed.
SC= Minor trimming of plastic trunk pan required.
SD= Hitches produced before 07/21/06 are rated at 350/3500 WC.
SE= Will not fit models with short wheelbase and rear stabilizer (anti-roll) bar.
SG= Hitches produced before 09/10/07 are rated at 1000/10,000 WC & 1200/12,000 WD.
SH= Hitches produced before 09/27/07 are rated at 1200/12,000 WC & 1400/14,000 WD.
SI= Hitches produced before 07/31/07 are rated at 350/3500 WC & 500/5000 WD.
SJ= Hitches produced before 03/20/08 are rated at 1200/12,000 WC & 1400/14,000 WD.
SN= Hitches produced before 04/28/08 are rated at 1000/10,000 WC & 1200/12,000 WD.
SO= With this hitch installed the step bumper is no longer able to be used as a towing point.
SP= Hitches produced before 04/27/08 are rated at 1200/12,000 WC & 1400/14,000 WD.
ST= Will not fit 2WD models with short bed .
T= Vans with step bumpers require longer ball mounts.
TA= Trunk access required for hitch installation.
TB= Plastic Bed Rails must be removed for installation.
TC= For 1/2 ton vehicles only.
TD= Hitches without electrical bracket are rated at 350/3500 WC & No WD. Hitch with electrical bracket rated at 400/4000 WC & No WD.
TF= For 3/4 and 1 ton vehicles only.
TH= Will not fit models with skid shield.
TS= Hitches without electrical bracket are rated at 350/3500 WC & No WD. Hitch with electrical bracket rated at 350/3500 WC & 500/5000 WD.
U= Cannot be used on vehicles equipped with step bumpers.
UD= Fascia removal required on XR & XRS models.
V= For vehicles with factory installed step bumpers only.
VB= Will not fit vehicles with vibration damper installed at rear of frame on drivers side.
X= Minor fascia trimming required.

Draw-Tite Rear Class I Receiver Hitches - Sport Frame Warranty

1. Warranty and Warranty Period. Draw-Tite warrants to the original Purchaser/ Consumer of the Products that Draw-Tite will provide free of charge the replacement of any Products which are defective in material or workmanship (the "Warranty"). This Warranty applies only to the original Purchaser/Consumer of the Products for as long as the original Purchaser/Consumer owns the vehicle on which the Products were installed. Defective Products returned to Draw-Tite become the property of Draw-Tite.
    
   
2. Limitations on the Warranty. The following limitations apply tothe Warranty:
    
   
   1. The Warranty applies only to Products which are defective in material or workmanship. This Warranty does not cover normal wear and tear. The Warranty does not cover service or labor charges which are incurred in removing or replacing any Products.
       
      
   2. The Warranty does not cover the finish placed on Products by Draw-Tite. Accordingly, Draw-Tite will not replace, repair or refinish any Products if the finish on the Product is worn in any manner.
       
      
   3. The Warranty does not extend to Products which are damaged or which fail as a result of the Products being abused, neglected, or misused in any manner, or as a result of any accident, or which are misapplied, overloaded, improperly installed, or altered in any manner by anyone other than Draw-Tite.
       
      
3. Obligations of Purchaser/Consumer. To obtain the benefits of the Warranty, the Purchaser/Consumer must complete the following steps:
    
   
   1. The Purchaser/Consumer must present the defective Product(s) together with proof of purchase to any of Draw-Tite's branches or its factory or to any authorized Draw-Tite dealer listed in local telephone directories.
       
      
   2. The Purchaser/Consumer must pay all handling, transportation, and shipping charges incurred for the return of the defective Products to Draw-Tite and for delivery of the replacement Products by Draw-Tite to the Purchaser/Consumer.
       
      
4. Obligations of Draw-Tite. Subject to the terms and limitations set forth in this document, Draw-Tite will provide replacement Products to the original Purchaser/Consumer free of charge.
    
   
5. Legal Rights and Limitations of Purchaser/Consumer. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU ALSO MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON ANY DRAW-TITE PRODUCT SHALL BE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE AT RETAIL TO THE ORIGINAL PURCHASER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
    
   DRAW-TITE SHALL NOT BE LIABLE OR ASSUME RESPONSIBILITY FOR THE LOSS OF THE USE OF ANY VEHICLE, LOSS OF TIME, RENTAL OF VEHI-CLES, LOSS OR DAMAGE TO PERSONAL PROPERTY, EXPENSES SUCH AS GASOLINE, TELEPHONE, LODGING, OR TOWING, OR ANY OTHER INCI-DENTAL OR CONSEQUENTIAL DAMAGES INCURRED AS A RESULT OF THE USE OR OWNERSHIP OF ANY PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE EXCLUSION OR LIMITATION SET FORTH BELOW MAY NOT APPLY TO YOU. REPLACEMENT OF THE PRODUCT IN THE MANNER PROVIDED ABOVE SHALL CONSTITUTE FULFILLMENT OF ALL LIABILITIES OF DRAW-TITE TO THE PURCHASER/CONSUMER WHETHER BASED ON CONTRACT OR OTHERWISE.

Draw-Tite Rear Class I Receiver Hitches - Sport Frame Installation

Draw-Tite Rear Class I Receiver Hitches - Sport Frame Feature Images

	24xxx Sport Frame Hitches: Attached to frame and/or bumper of your vehicle.
	Draw-Tite Rear Class I Sport Frame Receiver Hitch: Class I Receiver Hitch for cars, sport utility vehicles and mini vans with 1-1/4" receiver opening.
	3593 Ball Mount & Hitch Pin Included: Draw Bar Ball Mount and Hitch Pin with Kit is included with the Receiver Hitch.