Home > Performance > Performance Chips > Diagnostic Tools & Gauges > Edge Products Juice ATTITUDE Optional In Cab Controller
Edge Products Juice ATTITUDE Optional In Cab Controller |
![]() |
Edge Products has the ATTITUDE Optional In-Cab Controller for the Juice Peformance Engine Module. Edge products and adjustability has never been easier or looked better with the Edge products attitude performance modules in cab monitor and controller. The edge attitude in-cab controller combines sleek new engineering with cutting edge technology to provide state-of-the-art performance in adjusting levels, reading EGT and boost. With the addition of the controller, there will no longer be a need for gauges. With the backlit LCD display screen, EGT temperatures and boost readings will be displayed for easy and clear reading. With the push of the mode button, you can switch power levels and have adjustability on the fly.
- Complete Guage System: The Attitutude Controler mounts in cab and works as a complete guage system. The attitude can monitor EGT, Boost, RPM, as well as several other engine parameters. The Attitude Controller also has the ability to do 0-60 and 1/4 Mile lap times.
- Works with Edge Juice: The Attitude In Cab Controller was designed to be used with the Edge Juice Module. It allows users to access the EGT backdown safety feature as well as adjustable fueling levels for increased performance.
- LCD Screen: A full LCD screen shows 4 parameters at a time and takes up much less space that indivual guages.
- Shift-on-the Fly: With the Attitude Controller users have full control of their Juice Module with shift on the fly capabilities at the push of a button.
- Easy Installation: The Edge Attitude offers easy installation and easily couples with your Juice Module. At a fraction of the cost and time of installating individual guages, you can have access to over 100 vehicle parameters.
Attached below are answers to frequently asked questions about the attitude monitor in PDF format. For additional assistance, please call 7 days a week 1-877-216-5446 or 701-253-5906
AFTERMARKET PRODUCTS AND YOUR VEHICLE’S WARRANTY
Many of our customers ask, “Will your product void my vehicle manufacturer’s warranty?” While the answer is straightforward from a legal standpoint, we also want to educate our customers (and after-market consumers) on some industry realities and offer some common sense precautions to minimize your risk. Consumers of aftermarket products are protected by The Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your car and you take it in for warranty repair, the dealer must honor your warranty unless they can prove that whatever modifications you have added to your car actually caused the problem. Please keep in mind that towing in anything higher than level two and hard driving in levels four and five are not recommended. While as a consumer, you have strong legal protection with regards to your vehicle’s warranty, there is also a practical reality that different automotive manufacturers and dealers have greatly varying views on aftermarket products, in particular those that produce horsepower, such as performance enhancement chips, modified intake manifolds, or aftermarket exhaust systems. There are dealers and manufacturers out there that will use the presence of a horsepower upgrade to void your vehicle’s warranty. They will do this regardless of whose product you are using. Any aftermarket company that does not acknowledge this is misleading you. The bottom line is that while the law protects the consumer and provides for enforcement of the warranty, it is very difficult for most people to hire an attorney and fight a voided warranty. Edge recommends that you always disconnect and remove your module and monitor when you take your vehicle to a dealer for warranty work in order not to interfere with Diagnostic equipment.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
AFTERMARKET PRODUCTS AND YOUR VEHICLE’S WARRANTY
Many of our customers ask, “Will your product void my vehicle manufacturer’s warranty?” While the answer is straightforward from a legal standpoint, we also want to educate our customers (and after-market consumers) on some industry realities and offer some common sense precautions to minimize your risk. Consumers of aftermarket products are protected by The Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your car and you take it in for warranty repair, the dealer must honor your warranty unless they can prove that whatever modifications you have added to your car actually caused the problem. Please keep in mind that towing in anything higher than level two and hard driving in levels four and five are not recommended. While as a consumer, you have strong legal protection with regards to your vehicle’s warranty, there is also a practical reality that different automotive manufacturers and dealers have greatly varying views on aftermarket products, in particular those that produce horsepower, such as performance enhancement chips, modified intake manifolds, or aftermarket exhaust systems. There are dealers and manufacturers out there that will use the presence of a horsepower upgrade to void your vehicle’s warranty. They will do this regardless of whose product you are using. Any aftermarket company that does not acknowledge this is misleading you. The bottom line is that while the law protects the consumer and provides for enforcement of the warranty, it is very difficult for most people to hire an attorney and fight a voided warranty. Edge recommends that you always disconnect and remove your module and monitor when you take your vehicle to a dealer for warranty work in order not to interfere with Diagnostic equipment.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
Manufacturer InformationEdge performance products for gas and diesel engines include the Edge juice and juice platinum programmer modules, the EZ diesel performance modules, comp for dodge Cummins diesel, Cat RV modules and the all new evolution engine tuner programmer modules. The juice is available with the attitude or a2 incab controllers. Plus edge offers the trail jammer performance kits for jeep wranglers including a chip and intake system all in one. Edge performance products are available for gas and diesel engines for Dodge, Chevrolet, GMC, Ford and Jeep pickup trucks and sport utility vehicles. Edge manufactures modules and programmers for all major truck manufacturers including Ford, Chevy and Dodge. What sets Edge apart from its competitors is the philosophy that all products should install in less than ten minutes and the end user should have maximum adjustability enhanced with real time data to monitor vehicle performance as it is driven. Edge is committed to offer the highest quality, the best product on the market, and in some cases, the only product on the market, at a competitive price.View all Edge Products products View available Products for this Product Line |








