Plasmaglow FireStorm 4 Pin Converter 10999

  • Plasmaglow Logo
  4.4 of 5  (12 reviews)
$39.95 List:$194.00
Save:$154.05
 
Shipping:Ships between May 29th - Jun 1st
Financing:
See Terms
Part #:10999
Part Type:Wiring Adapter
Application:Converter (Works w/ 4-pin Towing Plug to Eliminate Hard Wiring of Firestorm)

Features

  • Scanning Design
  • Red, Amber & White LED's
  • 5 Function Light Bar
  • Improved Safety
  • No Drill Mounting
  • 3 Available Sizes

Description

You've heard about them, and now you want one, Plasmaglow Firestorm scanning LED light bars are the mac-daddy of light bars. A cutting-edge and exceptional design will give your truck a specialized look. The scanning feature, super bright LED's, simple mounting and multiple sizes make this scanning LED tailgate light bar your best choice.

5 Light Functions on this LED truck light bar with red LEDs providing brake and running lights, white LEDs offering reverse lights, and a choice of red or amber LED's for scanning turn signals. Unlike other tailgate light bars that have standard blinking signals, the FireStorm tailgate light bar for trucks allows the signal light to "scan" from the middle of the vehicle to the edges.

A bonus feature is the super bright LED's will vastly improve your vehicles visibility and safety. Aside from making your truck more visible the FireStorm light bar for pickups enables drivers to clearly communicate their intentions to other motorists when braking or turning. The white LED back up lights make driving in reverse much safer and easier.

3M self-adhesive pads offer a no drill, easy application under the tailgate so the light bar appears invisible. You will need to hardwire this scanning light bar to your truck; however the optional 4 pin converter will adapt it to fit your trailer harness. The Plasmaglow Fire Storm LED tailgate light bar is a two piece design available in 36", 48" and 60" scanning light bars to fit nearly any pickup truck or SUV.

Order Notes

12 Volt Accessories, Electronics, Wiring Harnesses, Engine Chips, LED Lights & Lighting Accessories are fully Warranted but Non-Returnable. Warranty for each product is according to the specific manufacturer's policy, which is generally repair or replacement. Should you have a warranty issue please contact us and we can facilitate a warranty service request for you with the manufacturer. More Info




Installation

This product offers an easy, at home no drill installation. The installation manual is clear cut and easy to read. For additional information, please see the installation manual below. You may also call us toll free at 1-866-309-1907 or 701-253-5906.
PDF IconFirestorm Scanning LED Tailgate Light Bar Install Instructions
PDF IconFirestorm Wiring Condenser Upgrade Instructions

Videos

Watch This Video
Plasmaglow - Firestorm
(00:16)


 

Product Reviews Summary for FireStorm Scanning LED Tailgate Light Bar

Overall		4.4 
Appearance
4.4
Ease of Installation
4.4
Price / Value
4.4
Quality
4.4
12  Customer Reviews
5 Star
6   
4 Star
5
3 Star
1
2 Star
0
1 Star
0
Order by

Posted on
Was this review helpful?
(Red Hill, PA)
Appearance
Price / Value
Ease of Installation
Quality
 Main complaint wiring is too small hard to find connectors to fit it
Posted on
Was this review helpful?
(Virginia Beach, VA)
Appearance
Price / Value
Ease of Installation
Quality
 The 4 pin converter was worth the cost.It made the installation simple.I added an extra 4 pin socket on the truck wiring for the converter and tucked it up out of sight so the socket for the trailer is still available for use.The converter is a no-brainer...Jim Ciampi
Posted on
Was this review helpful?
(Palm Bay, FL)
Appearance
Price / Value
Ease of Installation
Quality
 Although, I returned this item to real truck, I will review it hear anyway because I used a second one I purchased elsewhere that arrived before realtruck's. First things first, and I might add this is not mentioned anywhere in the description of the product, you can only use this product if your truck (or trailer) uses the same wire for turn signal and brake lights. If not, you can't use this product and must hard wire Firestorm to tailights. However, if your fortunate like me, then this product works great. The 7 output wires from the converter matched up perfectly to the colors of the 7 wires coming from the Firestorm for an easy wiring job. Then you have the option to plug into the four pin trailer harness or cut the plug of the converter and splice directly into trailer harness, leaving trailer plug free for a trailer. I chose to cut converter plug off and splice in directly behind the 7/4 pin trailer harness on my 2010 Dodge Ram 1500 Truck. There will be 6 wires to connect (rt turn/brake light; lt turn/brake light; running lights; ground; reverse; and 12V constant). All the wires were available in the 7 pin trailer harness. Installing the firestorm would have sucked without this converter because I would have had to run turn signal wires to front turn signals due to brake and turn signals using the same wire in the rear lights. Glad I made this purchase. I would strongly suggest you check the wiring configuration on your truck first before purchasing though. Other than that, I recommend this product. Four out of five stars due to plasmaglow not being clear that this product would not work for all applications.
Posted on
Was this review helpful?
(Palmer, AK)
Appearance
Price / Value
Ease of Installation
Quality
 Plasmaglow FireStorm 4 Pin Converter this product works very well, saved me alot of headace, and from having to my new truck wiring... thank you so much...made my job very easy..

Ray Lewis Sr.
Palmer,Alaska
Posted on
Was this review helpful?
(Warren, MN)
Appearance
Price / Value
Ease of Installation
Quality
Posted on
Was this review helpful?
(Gaffney, SC)
Appearance
Price / Value
Ease of Installation
Quality
Posted on
Was this review helpful?
(Crivitz, WI)
Appearance
Price / Value
Ease of Installation
Quality
 I own two of these units. One on a '05 Silverado and one on an 07 Silverado. The only complaint that I have - and it is a small one - the product did not tell me that I needed an extra part when purchasing it for the '07 truck with dual bulb turn and tail lights. Ask a rep before purchasing if you may need this.
Other than that - mounting was a snap, and the product itself is terrific. The nice thing about it is that it is in two pc's for shipping and installation, which makes it a lot easier to hannle and mount by yourself.
I shouldn't even give the product a 4 out of 5, it should receive a 5 out of 5.
Posted on
Was this review helpful?
(Waverly, NY)
Appearance
Price / Value
Ease of Installation
Quality
 This is a must have when ordering the light bar. It is expensive but the time it saves in the install makes it worth the cost. It would be nice if the two were sold as a package.
Posted on
Was this review helpful?
(Chicago, IL)
Appearance
Price / Value
Ease of Installation
Quality
 works as advertised, would have liked better instructions
Posted on
Was this review helpful?
(Mckees Rocks, PA)
Appearance
Price / Value
Ease of Installation
Quality
 An absolute must have for the LED bar! Only had to wire the reverse light and the power line to the battery. Wouldn't have even bought the LED Bar if I had to hardwire everything.
Page
 Top

View all Plasmaglow


 
 
 

Principle #3: Improve
Sign Up For Exclusive Deals
Customer Service & Phone Sales
Toll Free 1-877-216-5446
Monday - Friday 7 AM - 8 PM CST
Saturday and Sunday 8 AM - 8 PM CST
Facebook  Twitter  Google Plus   YouTube Blog  RSS Feed 

Affiliate Program    About Us    Contact Us    Careers    Site Map    Privacy Policy    Meet Us

©Copyright 2012 RealTruck.Com®. All rights reserved.  Please notify our Customer Service of site related problems.
^ Back To Top