Hella Dyna View Intelligent Driving Lights Kit

Description

Hella dynaview driving lights are the world first auxiliary corning lamps. For the first time, a driving lamp is able to illuminate corners and bends in the road independently and intelligently. Conventional high beam light always shines in only one direction: straight ahead. When steering around corners the driver drives into the dark accompanied by the danger of unpredictable obstacles lurking just around the corner. DynaView® considerably reduces the dangers of driving around corners at night - the driver can see ahead of the corner and react to hazards in plenty of time. This is an increase in safety, which is indispensable, particularly for professional drivers. A sensor constantly monitors the transverse acceleration of the vehicle and automatically switches the appropriate cornering headlamp on at the beginning of the bend. The result is sensational and amazing at the same time. "Driving blind" into the unknown is a thing of the past. From now on the road is illuminated exactly where the driver wants to see - around the rest of the bend. This is a decisive step to greater safety during night driving along winding roads. Thus the DynaView® headlamp is an impressive example of modern IntelliBeam® technology! Kit includes: Two lamps, optimized for right and left turns, Control unit with yaw rate sensor, Professional cable set for quick installation.

Features

• DynaView Technology:  The words first auxiliary turning lamp.  A sensor constantly monitors the transverse acceleration of the vehicle and automatically switches the appropriate cornering headlamp on at the beginning of the bend
• Intelligent Yaw Rate Sensors:  Read vehicle turns and direct extra light into the turn, making for safer night driving
• High-tech 7” lamps: Dynaview uses two bulbs: one standard hi-beam aimed ahead, one angled for turn illumination
• Multi Bulb Design:  One individual DynaView® headlamp actually consists of two headlamps in a high-tech housing with dual reflectors. While the upper reflector chamber is responsible for the conventional high beam light, the lower reflector chamber has been optimized for the inside illumination of the curve using asymmetrical free-form (FF) technology.
• DynaView Angled Light:  The intelligent light gently dims once the vehicle straightens out
• Specially Cut  Reflectors: These reflectors cast clear, brighter light than standard lamps
• Heavy Duty Use:  Hella specifically designed the DynaView lights for heavy duty continuous use under tough conditions.  These lamps are deal for trucks, off-roaders and RVs
• Dimensions: 7 3/4” high x 7" wide x 4 1/8" deep
• Complete kit includes: 2 lamps, control unit with yaw-rate sensors and a professional wiring harness and mounting hardware
• Hella 1-Year Warranty

Order Notes

This kit can be converted to 24V just by changing the Bulb to a 24V H7

Hella Dyna View Intelligent Driving Lights Kit Frequently Asked Questions

DynaView® - IntelliBeam® Technology IntelliBeam®: This revolutionary technology uses intelligent lighting and headlamp systems - the strain on the driver is reduced and he can fully concentrate on the driving experience!

In off-road situations DynaView® fully exploits the advantages of IntelliBeam® technology. Independently of external information through GPS systems, for example, DynaView® reacts to any change in direction with the correct cornering light, even away from the roads!

One individual DynaView® headlamp actually consists of two headlamps in a high-tech housing with dual reflectors. While the upper reflector chamber is responsible for the conventional high beam light, the lower reflector chamber has been optimized for the inside illumination of the curve using asymmetrical free-form (FF) technology.

This division of labor means that optimum light is always available - depending on the current transverse acceleration of the vehicle: for straight stretches of road the strong, straight high beam, for driving around bends the auxiliary cornering light, which is aligned to the sides of the road.

The heart of the DynaView® control center is the yaw rate sensor which permanently records the current transverse acceleration condition of the vehicle - as soon as it detects the corner, the sensor switches the correct cornering lamp on. To prevent unpleasant "holes" being formed in the beam, a dimmer gently and automatically decreases the brightness of the DynaView lamp beam as the car exits the corner.

For the first time in the world there is an auxiliary headlamp available that illuminates corners and bends intelligently to automatically eliminate unpleasant surprises during night driving. The complete system has been specifically designed for heavy-duty continuous use under difficult conditions and is thus ideally suited for trucks, motor homes and off-road vehicles.

Hella Dyna View Intelligent Driving Lights Kit Specifications

Dimensions: 7 3/4” high x 7" wide x 4 1/8" deep

Hella Dyna View Intelligent Driving Lights Kit Warranty

Hella Dyna View Intelligent Driving Lights Kit Installation

Hella Dyna View Intelligent Driving Lights Kit - How It Works

	DynaView Technology Conventional high beams miss the corners - but not DynaView! A sensor constantly monitors the transverse acceleration of the vehicle and automatically switches the appropriate cornering headlamp on at the beginning of the bend.
	Multi Bulb Design One individual DynaView® headlamp actually consists of two headlamps in a high-tech housing with dual reflectors. While the upper reflector chamber is responsible for the conventional high beam light, the lower reflector chamber has been optimized for the inside illumination of the curve using asymmetrical free-form (FF) technology.

Hella Dyna View Intelligent Driving Lights Kit Feature Images

	Multi Bulb Design: One individual DynaView® headlamp actually consists of two headlamps in a high-tech housing with dual reflectors. While the upper reflector chamber is responsible for the conventional high beam light, the lower reflector chamber has been optimized for the inside illumination of the curve using asymmetrical free-form (FF) technology.
	Yaw Rate Sensor: The heart of the DynaView® control center is the yaw rate sensor which permanently records the current transverse acceleration condition of the vehicle - as soon as it detects the corner, the sensor switches the correct cornering lamp on. To prevent unpleasant "holes" being formed in the beam, a dimmer gently and automatically decreases the brightness of the DynaView lamp beam as the car exits the corner.
	High Tech 7" Lamps: High-tech 7” lamps: Dynaview uses two bulbs: one standard hi-beam aimed ahead, one angled for turn illumination
	Hella Dyna View Intelligent Driving Lights Kit: Complete kit includes: 2 lamps, control unit with yaw-rate sensors and a professional wiring harness and mounting hardware
	DynaView Technology: Conventional high beams miss the corners - but not DynaView! A sensor constantly monitors the transverse acceleration of the vehicle and automatically switches the appropriate cornering headlamp on at the beginning of the bend.