Truck Accessories > Air Intakes > Injen Power Flow Air Intakes

Injen Power Flow Air Intakes

  • Injen Power Flow Air Intakes
  • Injen Power Flow Air Intakes
PowerFlow Cold Air Intake Systems and Filters
Injen Power Flow Air Intakes
Vehicle Information
Select Your Vehicle



Fits your
2001 Chevy Silverado 3500Change
Product Information
Our Price:$401.95
Shipping:
Rating:
  4.7 (14 reviews)
Part #:PF7050WB
UPC:843115004880
Product Options


Features

  • Mega Ram (MR) Technology: Injen spent years developing the MR Technology. This high tech tuning process allows Injen to fine tune the diameter and length of the intake tube for the greatest horse power and torque gains.
  • Custom Tuned: The world's first custom tuned cold air intake that is specifically tuned for the drive train of each specific year, make and model. The intake tube is made of aerospace grade, anti-corrosive, light weight T-6 aluminum that is fine tuned for the specific vehicle.
  • Premium Air Filter: Injen designed the first urethane filter with a built in velocity stack for added performance.
  • Easy Installation: The Injen Power Flow Intakes offer an easy at home bolt on installation.
  • Maximum Performance: The state of the art design of the Injen Power Flow intake delivers powerful acceleration, lightning fast throttle response and consistent power gains throughout the entire RPM range.
  • Inline Calibration: Controls the air speed and releases it through the mass air flow sensor at precisely calculated intervals.
  • Lifetime Warranty: Injen Technology backs their tube and filter with a limited lifetime warranty.
  • Power Box Heat Shield: If your specific vehicle will perform better with a heat shield, then it is included in the kit. If the power box heat shield would reduce power or cannot fit in your specific application, then it is not included.)

Description

For more engine horse power and torque, there is nothing better than the Injen Power-Flow performance air intakes. The Injen technology Power Flow air intake systems are specifically designed for performance pickup trucks and SUVs. Injen has engineered the Power-Flow air intakes to the highest standards by utilizing the best technology available. The Power-Flow intakes use Injen's own patent pending MR Technology makes the Power Flow series intake system the world's first tuned intake system on the market! The Injen Powerflow intake system assures you the highest horsepower and torque gains, within the safe factory air/fuel ratio limits.


Order Notes

If your specific vehicle performs better with a power heat box, then it is also included in the kit. If the heat box reduces power or cannot fit in your specific application, then it is not included.

View Available Part Numbers For This Product Line

Frequently Asked Questions

1. Will adding an Injen air intake increase my miles per gallon?
2. What increase in horsepower can I expect from adding an Injen?
3. Is horsepower the only thing I should consider in an air intake system?
4. How does an Injen air intake system differ from other brands?
5. Will water enter my engine if I install a cold air intake?
6. Are Injen air intake system's street legal and will I have a problem passing state vehicle inspections due to the altering of my air box?

7. Will an Injen air intake system cause my vehicle's mass air sensor to fail?
8. Can an engine receive too much airflow?
9. Will I need to make engine adjustments to my vehicle after I install an Injen air intake system?

10. How much does an air intake kit cost?
11. Can I purchase replacement parts or filter?
12. Will the use of an Injen air intake void my factory warranty?
13. Will the surgical cotton gauze shrink from engine heat?
14. Should I rotate my filter to get more longevity?
15. How do I know when to clean the air filter?
16. Can I use cleaning agents other than the Injen cleaner and oil?
17. Can I use an air compressor to dry the filter faster?
18. Should I hit the filter on the ground or use a brush against the screen to remove larger particles of debris?

19. How much oil should I use to re-oil my filter after it is cleaned?
20. How can I tell the size of the engine in my vehicle?
21. Can I get a free decal?
22. Does Injen offer any sponsorship?
23. Can I purchase products directly from Injen Technology?
24. Will a car type “A” intake fit my car type “B” since they share the same engine?
25. Is it OK to change my filter to another brand or type?

1.Individual driving habits will have a significant effect on fuel efficiency. Most consumers purchase Injen products for increased horsepower and torque. However, many of our consumers report enjoying an increase in miles per gallon. Actual results will vary depending on your vehicle, driving habits, applied load on the engine (such as towing), existing factory air system restrictions, etc. Less restrictive air passageways such as an Injen air intake can provide more efficient combustion. If you are like most performance enthusiasts and take advantage of the additional horsepower by driving harder, you will not see much of an increase in MPG, if any at all.

2. We offer several varieties of air intake systems. The product lines offered include: Sport Compact; RD-Race Division, IS-Short Ram Intake Systems, EIS-European Series, and our new Truck/SUV and Performance Automotive Series called Power-Flow. Each product line has unique characteristics designed to meet your specific needs while taking into consideration our minimum quality standards and the OEM factory settings.

IS Intake Systems
The IS Series is a traditional, underhood intake system that is placed in the stock location of the factory air-box system. Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible. Every IS system is certified by the California Air Resource Board or submitted with pending approval and backed by Injen Technology's limited lifetime warranty.

EIS Series European Intake Systems
The EIS Series utilizes both cold air and short ram air intake systems designed specifically for International vehicles and the owners demand for high performance products. Each kit is strategically designed to provide maximum horsepower and torque gains. EIS systems are built using 6061 T-6 aluminum alloy integrating flawless bends and interconnections to maintain smooth and cold air for optimumperformance gains.

RD Series Race Division Intake Systems
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified by the California Air Resource Board or submitted with pending approval and backed by Injen Technology's limited lifetime warranty.

SP Series Intake Systems
This unique design was specifically engineered with MR Technology (MegaRam), to provide maximum horsepower gains and take into consideration the air to fuel ratio's set by the Original Equipment Manufacturer. MR Technology is a sophisticated tuning process developed by Injen Technology; altering Cold Air Intake systems to be carefully tuned within Factory Safe limits. Through a series of engineered and tested air-restricted sections, the pressurized mass air is controlled to a calculated aggression, allowing for a proper air/fuel calibration. The end results allows for more reliable and consistent horsepower/torque gains. MR Technology is the World's First Tuned Intake System! Every SP system is certified by the California Air Resource Board or submitted with pending approval and backed by Injen Technology's limited lifetime warranty. (Vehicles without Mass air sensors will have special tube designs but may not include MR Technology)


PF Series POWER-FLOW Air Intake Systems
The POWER-FLOW series has Revolutionize air intakes for Truck/SUV and Performance Automotive vehicles. Injen has spent countless hours engineering this revolutionary design; incorporating every known premium feature and added several new Injen only unprecedented features. These features include our MR Technology (Worlds Only Tuned Air Intakes), heat resistant Composite POWER BOX with Polished Brushed Aluminum Skin, Cold Air Inducer, Air Stabilizer, Velocity Stack and Stainless Steel Pre-Filters. The POWER-FLOW has so many features and is loaded with such high horsepower gains your friends will be begging you to look under your hood. For more details of each feature click on our POWER-FLOW section of the Website. Every POWER-FLOW system is certified by the California Air Resource Board or submitted with pending approval and backed by Injen TechnologyÕs limited lifetime warranty. This air intake just set the new benchmark for air intake systems.

3. NO! All of us enthusiasts love to add the highest possible horsepower. If your only concern were horsepower, then why would even consider using an air filter? How about running bare to the air without an air filter at all? Because you want to keep your engine running. Even the world's top racers consider more then just horsepower. Depending on what series of racing you are competing in, several factors must be considered. If your driving on a street or racing around a dirt track, keeping your engine clean from dirt and even water may mean the difference between winning or losing the next race or arriving home from vacation with your own vehicle Vs a rental (check out our Hydro-Shield). As noted with our MR Technology, using a non-tuned air intake system may mean the air-to-fuel ratio's you are operating with are very lean or too rich; have you ever heard the term melt down? (Click onto our section for MR Technology).Horsepower gains are measured in several ways but it is horsepower to the wheels that really counts. So do not be fooled by claims of unusually high horsepower gains; check out all the facts and ask for documented test results. You should also keep in mind when reviewing test results; were the all of the tests conducted on the same day and at the same temperature? The density of air varies with both the weather and altitude. That means there is literally more air in the same amount of space when the weather is cool than when it's hot. Since air is a variable, air-flow claims in absolute terms are not meaningful. This means we must move into the concept of comparison and/or averages. When we conduct high performance testing at Injen Technology, we are testing relative horsepower, torque and air to fuel ratio on a particular vehicle on a particular day. This process is important so we can hold as many variables constant while comparing performance with and without the Injen Technology product on the vehicle.
Educated enthusiasts and professional racers consider all factors and only use products that allow them to maximize their horsepower and protect their engines at the same time. At Injen, we consider all of these factors and offer our customers only products that are properly engineered and tested to maximize horsepower gains and keep your vehicle running at an optimum performance level.

4. As a professional company, we will never speak negatively about another competitor or their products. However, what we can offer is information as to how we manufacturer our products and reasons we believe specific design
requirements are necessary to provide the following: maximum horsepower, engine protection, product quality, optimum fuel efficiency and longevity of the product. Every product manufactured by Injen Technology is designed from the highest quality materials, engineered to be vehicle specific and meet individual goals of the user. For example, the Race Division Series handles mid-top range power cravings and the SP series is designed for the most sophisticated current model engines delivering maximum power results at all levels. The new Power-Flow incorporates an industry first POWER BOX. Like our other air intakes, this series has unique high performance characteristics and components specifically engineered to perform under conditions such as air starved engines, big block horsepower requirements, dirty environments, OEM air-to-fuel ratioÕs, etc. All intakes utilize 60601 T6 aluminum tubing or Cast design, Tig welding, swedging and Mass Air Sensor adaptors as necessary. You should also consider that many manufacturers produce their product overseas. No research, development or testing is incorporated into most of these designs. Injen Technology keeps all steps of the manufacturing in-house. All intakes are tested on actual vehicles using our in-house four-wheel drive Dyno-Jet before production starts

5. Under normal driving conditions this is usually not a problem however, in harsh rains or flooding if the filter becomes submerged in water the engine may ingest water. Rain splashes and small puddles can cause hydrolock and may cause damage to the engine. If possible, it is highly recommend avoiding puddles or flooding conditions. Most filters lie 12'-14' above ground. You may significantly reduce the risk Hydrolock by purchasing Injen TechnologyÕs Hydro-Shield pre-filter. Hydro-Shields provide added protection against water ingestion and pre-mature clogging of your air filter. All Hydro-Shields are manufactured with a hydrophobic process creating shield against water. The Hydro-Shields also shield against debris as small as .005' increasing the length of time your filter performs at maximum horsepower. Hydro-Shield are water repellent and not water proof. (See Hydro-Shields on our website)

6. Injen Technology submits all of our air intake systems for CARB exemption approval (California Air Resource Board). All of our air intake systems are either certified by CARB or have been submitted for CARB exemption. Considering California has some of the toughest emission laws in the country, CARB approval has been accepted as legal by other states. Each of these kits includes a high temperature decal with the CARB exempt OEO number. This decal identifies approved aftermarket add on products from non-approved products. As long as you have the approved decal you shouldn't have any problems with vehicle inspections. You can visit our Website www.injen.com and click on CARB EO listings to determine the CARB status.

7. Currently, Injen is unaware of any evidence that an Injen air intake, air filter or oil from an Injen air filter can damage or cause the malfunction of a Mass Air Flow sensor, regardless of the vehicle involved. Injen is the only company offering a Tuned Air Intake system (MR Technology) that takes into consideration the factory air to fuel ratio settings. We are committed to quality products, proper testing and vehicle compatibility designed to follow OEM settings preventing the possibility of vehicle damage or malfunction of any automotive component. Currently we have not received any claims of damage or problems.

8. No, an engine can only take in a fixed volume of air depending on the engine's size. Availability of excess air would simply be unused. The more restriction that an air intake system (filter, air box, and tubing) causes, the greater the potential is for power and mileage degradation. Keep in mind cold air is always an improvement in an air intake system. What is critical is ensuring the correct mixture of air to fuel ratioÕs as set by the OEM manufacturers.

9. On fuel injected vehicles, the original equipment manufacturer (OEM) computer and emissions control system will usually partially adjust for the increase in air. The OEM computer will adjust immediately if it is reset. Removing the battery cable from the battery for a minimum of 15minutes should reset the computer. Injen Technology offers MegaRam Technology for many of the latest vehicles, MR Technology follows the manufactures air to fuel ratio specifications. In most cases this means no adjustments will be necessary. Many aftermarket kits on the market may require significant adjustments specifically to richen or lean out the system which may require the need to purchase an expensive external electronic management system; this is not the case with Injen products.

10. It depends upon the application. The average price range is from $175.00 to $500.00. The main factor affecting pricing is the complications of design and cost of the materials to manufacturer the kit. The more complicated the bends, swedging or polishing, and number of parts, the greater the price. Visit our Website www.injen.com and click on the dealer list for a local source or current pricing.

11. Yes, replacement parts and filters are available form any local authorized Injen retailer or the Injen online store. We highly recommend using a local source for immediate service. Visit our Website www.injen.com and click on the dealer list for a local source or current pricing.

12. The Magnusson-Moss Warranty - Federal Trade Commission Improvement Act of 1975 protects consumers from such fraudulent activity by new car dealers. Under this Act, aftermarket equipment that improves performance does not void a vehicle manufacturer's original warranty, unless the warranty clearly states the addition of aftermarket equipment automatically voids your vehicle's warranty or if it can be proven that the aftermarket device is the direct cause of the failure. The easiest way to check this is to look in your owner's manual under, "what is notcovered". Under Magnusson-Moss Act a dealer must prove, not just vocalize, that aftermarket equipment caused the need for repairs before they can deny warranty coverage. If they cannot prove such claim-or offer an explanation- it is your legal right to demand compliance with the warranty. The Federal Trade Commission (202.326.3128) administers the Magnusson-Moss Act and monitors compliance with warranty law. Ct cause of the failure. The easiest way to check this is to look in your owner's -Moss Act a dealer must prove, not just vocalize, that aftermarket equipment caused the need for repairs

13. No. You will not have a problem with the material shrinking as long as the proper cleaning solutions and oil are used. Do not use a hair dryer to dry your filter after cleaning.

14. This is actually recommended. Most vehicles have a particular area to draw air in from based on the filter surroundings and rotating the filter will keep it clean longer.

15. How often you need to clean your filter will depend on the air and road conditions in your area. Most filters require cleaning before the dirt build up gets as thick as the wire mesh. The usual interval is 30,000 - 40,000 miles depending on driving conditions. We recommend that you check your filter about once a year in normal usage and once every six months if you are located in a dirty environment. If you are running with a cold air intake we recommend checking the filter every 10,000 Ð 15,000. Using a Hydro-Shield will reduce service intervals.

16. We highly recommend that you only use Injen Technology oil and cleaner. Injen Technology air filter is a specific mineral oil blended with special polymers to form a very efficient tack barrier. Standard petroleum products such as transmission fluid and motor oil will soften and destroy the filter bonding agents and sealed edges. Injen cleaner is a non-detergent degreaser. Solvents, gasoline and various house hold chemicals will harden the rubber seals causing the filter to distort and may affect the ability of cotton fibers to function properly. A mild detergent can be used in an emergency situation, but care should be taken to fully rinse and remove the soap. Removing soap from the filter can be extremely difficult or time consuming. Always ensure the filter is completely dry before re-oiling.

17. No, this can blow holes directly through the filter material and ruin the filter. Choose a warm sunny day if possible to clean the filter and let it dry naturally.

18. No, this could damage the filter base or top and tear holes in the cotton gauze. (see filter cleaning instructions provided with every kit or cleaning instructions on this web site).

19. Surgical cotton air filters are extremely absorbent and will not require significant amounts of oil. Keep in mind very little oil goes a long way. Using a small bead of oil, run the bead up and down the filter pleat allowing time for the filter to absorb the oil and act as a wick. If after 10-15 minutes the filter has areas that look gray, add a small amount of oil in the gray or un-oiled area only. Never over oil an air filter.

20.North America: The Majority of vehicles have an emissions decal placed either on the backside of the hood, on the air box (the box that holds the air filter in place) or on the radiator core support. Your engine size should be shown on the decal (5.7L for example). If you are unable to locate the emissions decal you may also find the engine size printed on the decal under the hood that shows your engine's belt routing. If you still cannot find your engine size, contact your local dealer.Europe: Your registration documents will detail your engine size and type of vehicle. However, if you do not know whether your vehicle is single point injection (SPI) or multi point injection (MPI) we suggest you consult your local dealer.

21. Yes, you will need to send a self addressed stamped envelope to Injen Technology Co. Let. 285 Pioneer Place, Pomona, CA 91768.

22. We only accept sponsorship proposals by US mail, all e-mail requests will be deleted and unanswered. If a proposal is mailed in, we only notify you if it is accepted. Please no inquiries.

23. Sorry, we do not sell direct to the public. You may contact any authorized dealer to assist you. For a dealer nearest you visit our Dealer List on the Website.

24. Possibly one intake may fit many different makes and model vehicles but we can not guarantee fitment on any vehicle unless it is clearly stated and intended for that specific make and model. We test each product we make for horsepower and fitment specifically for each application.

25. It is possible to fit another brand of filter onto an Injen intake system, but by doing so you will be altering your intake system and voiding the CARB status. During testing, Injen test each filter design for type of vehicle and making sure that the filter will work in conjunction with the factory ECU and settings. By changing filter designs or brands, it is quite possible that you will get an engine check light and or sacrifice horsepower. We do not recommend changing the filter from what originally supplied with the air intake system. In addition, all of our SP and PF series use MR Technology which means they are specifically tuned to your vehicles OEM Air/Fuel ratio's. Changing any component may significantly alter the Air/Fuel ratio's, void your warranty and possible damage your engine.

Additional Features

Injen Power Flow Air IntakesMR (Mega Ram) Technology: Revolutionizing the intake performance market one application at a time, our patent pending MR Technology Process is leading the way. With so many late models cars utilizing the best in technology, making safe, reliable power gains is a concern. These late model vehicles have very sensitive factory a/f ratios, MR Technology will not only allow the intake to be tuned within that factory ratio, but will optimize horsepower and torque gains all around. Through a step down process, MR Technology will regulate the airflow at certain strategic points, ultimately controlling the rate and density. By doing so, the MR Technology process tunes the intake system to avoid the necessity of calibrating MAF sensors. Overall, the MR Technology process was developed in order to compensate for the vast change in technology and the need for safe, reliable performance products.
Injen Power Flow Air Intakes2 Stage Air Filter: Constructed of surgical cotton gauze, the filter element comes precisely oiled to maintain consistent airflow and prevent obstructions to the intake system. Each filter is specifically chosen for every application, as the dimensions, pleat and flow rate are highly crucial to optimal performance gains
Injen Power Flow Air IntakesAluminum Skin Plate: The .032” Brushed Aluminum Cosmetic Shield completes the innovative design of the “Worlds First Power Box”. The Cosmetic Shield enhances the overall appearance of the Power-Flow kit and provides added protection for the high tech Power-Box and two stage air filter.
Injen Power Flow Air IntakesInjen POWER-Flow Air Intake: High Tempeture Composite enclosure fitted with pre-Filter Screens, allowing for air control, large debris filtration, air stability and a reduction of engine acoustice utilizing the sound dampening velocity stack. the Power box design optimizes performance and delivers consistent horsepower/torque gains.
Injen Power Flow Air IntakesInline Calibration: MR Technology is a sophisticated tuning process developed by Injen Technology; altering Cold Air Intake systems to be carefully tuned within Factory Safe limits. Through a series of engineered and tested air- restricted sections, the pressurized mass air is controlled to a calculated aggression, allowing for a proper air/fuel calibration. The end results allows for more reliable and consistent horsepower/torque gains. MR Technology is the World’s First Tuned Intake System!
Injen Power Flow Air IntakesSS Pre Filter Screen: Two Stainless Steel Pre-Filter screens are strategically placed on the POWER-FLOW Box, allow for the pre-filtration of particles up to 250 microns. Additionally, this accounts for a reduction of contaminants, less maintenance on the POWER-FLOW filter element, and consistent optimal gains.

Installation

The Injen Power Flow Air Intakes offers an easy, at home bolt on installation. The installation manual is clear cut and easy to read. For additional information, please call us toll free at 1-877-216-5446 or 701-253-5906.

Watch This Video
How To Install the Injen Power Flow Air Intake
(08:06)

Videos

Watch This Video
How To Install the Injen Power Flow Air Intake
(08:06)


 

Product Reviews Summary

Overall
4.7 
Appearance
4.7
Ease of Installation
4.7
Price / Value
4.7
Quality
4.7
14  Customer Reviews
5 Star
11   
4 Star
2
3 Star
1
2 Star
0
1 Star
0
Order by

Posted on
Was this review helpful?
- GMC Sierra 1500 (Williamsburg, VA)
Appearance
Price / Value
Ease of Installation
Quality
I have a 2008 GMC sierra 5.3L. I have done alot of research online and talking to people. If you are considering a coldair intake that actually does what it says, looks great and is easy to install look no further. You will not be disapointed. My truck stays in 4 cylinder mode more and instead of 21 it now says 25,27. Average is now 19.8 Performance YES. Only one thing I decided to modify. The cross piece on my truck panel is directly in way of cone entrance of air I cut one side and bent in. Plus Realtruck.com has excellent customer service not as common as you might think
Posted on
Was this review helpful?
- Ford F150 (Ellsinore, MO)
Appearance
Price / Value
Ease of Installation
Quality
Had minor problem getting product shipped to my rural route address,took a week and a half to get it.product was an easy install, done in about an hour with my minimal mechanical skills.product looks great but no noticable power gains or mpg while keeping my foot out of the throttle.I plan on using realtruck again, hopefully address problem is fixed now.
Posted on
Was this review helpful?
- Ford F150 (Lowell, AR)
Appearance
Price / Value
Ease of Installation
Quality
Have orderd a few different intakes ranging from xdi,air raid,banks,the installs are always easy with any upper end performance air intake and ingen is no different the look of the ingen goes old school polished and the sound is very noticable and throaty,throttle responce is top notch,over all this has no disapponents and is worth the money I would definately recommend it to a friend or to the public ....hrspwr to be enjoyed
Posted on
Was this review helpful?
- Toyota Tacoma (Helena, MT)
Appearance
Price / Value
Ease of Installation
Quality
Really impressed with the performance after fitting my vehicle with the new Injen intake system. Ease of installation was also a plus. Improved acceleration through all RPM ranges and definite inprovement with highway driving. I've yet to see any positive change in gas mileage, but will eventually track that also. Even if it remains the same, I'm sold on the system.
Posted on
Was this review helpful?
- Chevy Silverado 2500 (Canaan, NH)
Appearance
Price / Value
Ease of Installation
Quality
shipped on time and Installed complete in 20 minuts
Posted on
Was this review helpful?
- GMC Sonoma (Hotchkiss)
Appearance
Price / Value
Ease of Installation
Quality
What a difference this puppy made!
I love it you can really feel it
Posted on
Was this review helpful?
- Chevy Avalanche (Harker Heights, TX)
Appearance
Price / Value
Ease of Installation
Quality
Posted on
Was this review helpful?
- Toyota FJ Cruiser (Essex Junction, VT)
Appearance
Price / Value
Ease of Installation
Quality
Expensive but AWSOME. Best intake I've bought
Posted on
Was this review helpful?
- Nissan Frontier (Herndon, VA)
Appearance
Price / Value
Ease of Installation
Quality
Do read the instruction carefully and hightlight things need to avoid doing before starting install it. It took me less than 45 minutes to install the Injen Air Intake system completely.

Not much improvement on gas millage but love the improvement for the torque, and the engine' sound like a racing car.

Highly recommend for everyone who love to have a heavy footing on the gas pedal.

Thanks
Posted on
Was this review helpful?
- Dodge Magnum (Dover, NH)
Appearance
Price / Value
Ease of Installation
Quality
HI JUST A QUICK YES .ON THE INJEN POWER FLOW AIR INTAKE.IT WAS EZ TO IN STALL. LOOKS GOOD. THE CAR PERFOMANCE FROM MORE AIR FLOW WAS OUTSTANDING. AND THE LOOK ON PEOPLES FACE WHEN THEY SEE IT UNDER THE HOOD..POLISHED,SHINED.LARGE AIR INTAKE...GOOD THING AIR IS FREE. BOB
Page
 Top