| Customer Rating |
Product |
 |
5/5 for ATA-32017 - Kwik Draw Tonneau Cover
Posted By:Michael L. (Kansas City, MO) on 12/2009
Fantastic cover. By far the best I've ever purchased. Great vendor. Shipped fast and great customer service. Thanks.
|
|
5/5 for ATA-37019 - Kwik Draw Tonneau Cover
Posted By:Luis F. (Hope Mills, NC) on 12/2009
Wow! I highly recommend this top...it only took 5 minutes to install. All you have to do is take it out of the box and put it on your truck. That's it!
|
 |
1/5 for ATA-37018 - Kwik Draw Tonneau Cover
Posted By:Luis F. (Hope Mills, NC) on 11/2009
I you live in a hot climate this will be an easy top to put together. If you don't good luck. You see the plastic needs to expand in order for you to put this top together so unless you use a heat gun you won't be able to put this thing together. By the way, this top came with the corners missing so make sure you double check everthing before you start putting this thing together.
|
|
2/5 for ATA-36921 - Kwik Draw Tonneau Cover
Posted By:Daniel T. (York, PA) on 11/2009
good fit....I like the product....there was a small nick in the vinyl on the passenger's side near the cab.
|
|
3/5 for ATA-33001 - Kwik Draw Tonneau Cover
Posted By:Nick S. (Denver, CO) on 10/2009
I bought this cover to keep my ice melt dry in my plow truck. While the cover works great for keeping things dry in the bed, the mounts fall short. With the snow on top of the tonneau cover, it releases the latches, not good when you're on the highway. Other than that, its as stated, easy to install in probably 5 minutes, and keeps thing in the bed dry.
|
|
5/5 for ATA-38901 - Kwik Draw Tonneau Cover
Posted By:Ronald T. (Marcellus, NY) on 10/2009
it was easy to install and looks real nice to thank you very much.
|
|
5/5 for ATA-31005 - Kwik Draw Tonneau Cover
Posted By:Nedrin L. (Belleville, MI) on 10/2009
The tonneau cover fits great and I don't have to deal with all those buttons.
Installation was very easy. I have the stepside, short bed, so rails had to be mounted to allow the cover to be installed. That installation took maybe 1/2 hour (about 15 min each rail). After that, the actual installation of the cover was very easy - just needed to adjust the mounts so that the cover fit nice and tight (very easy).
I also invested in a couple of key locks to secure the cover (just in case). These were not included. Standard size locks won't fit, so wait until you see it before you buy them.
The product was on back order, so I had to wait an additional 2 weeks. It was no big deal for me and well worth the wait. Once it was ready, I received it in a very timely manner. The sales associates did a very good job of keeping me updated (via email) throughout the process.
Overall, I am very pleased with Real Truck and I would definately purchase from them again.
|
|
4/5 for ATA-33018 - Kwik Draw Tonneau Cover
Posted By:Curtis F. (Lancaster, OH) on 08/2009
The cover looks and works great and was at my house sooner than expected. Not as easy to assemble as the video, I put it together by myself with some effort. Would be easy with two people.
|
|
4/5 for ATA-37923 - Kwik Draw Tonneau Cover
Posted By:Michael M. (Enola, PA) on 05/2009
Like the cover very much. Set up was a bit more difficult than that was shown on the video. The clip to hold the bars in place and meant to push the bars apart, took two people to pull enough tension on it to insert the clips. The clips were not strong enought to push the bars on their own. Other than that it was easy to install on the truck and works really great.
|
|
2/5 for ATA-32017 - Kwik Draw Tonneau Cover
Posted By:Travis A. (Windsor, MO) on 02/2009
If you buy this top have self tapping metal screws ready to replace the cheap clips that lock the bows in place. I was totally dissatisfied with this top. It did look good but when driving down the road if flopped around and I had the bows stretched as tight as they could be. Another problem was getting the top to seal to the truck bed rails. It will not no matter how tight I tightened the top. Engineering nightmare that needs to go back to the drawing board. If I were you and you were looking to buy this top I would spend the extra money and get a better one. I sold this one on craigslist and bought an extang.....love it. Advantage truck accessories needs to take another look at this one. The people at ATA were nice but not much help. Think they knew how much of a piece this top is.
|
|
5/5 for ATA-31012 - Kwik Draw Tonneau Cover
Posted By:David H. (East Syracuse, NY) on 11/2008
I PURCHASED A TORZA KWIK DRAW SOFT FOLDING COVER ONLINE ON SUNDAY NITE AND IT WAS AT MY HOUSE ON THURSDAY MORNING. I'M VERY IMPRESSED WITH THE SERVICE AND HAVE RECOMMENDED FRIENDS TO PURCHASE THERE PRODUCTS FROM THEM ALSO. KEEP UP THE GOOD WORK!
|
|
5/5 for ATA-33018 - Kwik Draw Tonneau Cover
Posted By:Chuck E. (Dryden, MI) on 07/2008
Looks and fits great...A snap to install...Very happy with it..
|
|
3/5 for ATA-33018 - Kwik Draw Tonneau Cover
Posted By:Michael J J. (Norwood, PA) on 06/2008
instructions hard 2 follow. u need a dvd 2 show how 2 put this cover together . plastic snaps 4 support bars 2 hard 2 use
|
|
1/5 for ATA-37005 - Kwik Draw Tonneau Cover
Posted By:Suzanne W. (San Jose) on 05/2008
The corners were exceptionally hard to get together. I do believe there is a design flaw. It took two very strong capable people more than a hour to figure out the corners, we could not get them to go together without cutting the plastic parts. I do construction and my boyfriend is a engineer, so I should think we have a combined brainpower to figure this thing out, it just wasn't gonna happen without cutting. Not good.
|
|
4/5 for ATA-33020 - Kwik Draw Tonneau Cover
Posted By:Anthony W. (Callahan) on 05/2008
Cover was a little difficult to assemble. Clips that keep the horizonal bars taut are made of cheap plastic. And if you're not careful...you could break all of them during assembly. One clip was defective out of the box. The cover fit very well to my style truck. It stays tight (very little material wave) while driving down the highway. The folding and unfolding operation is simple. Unfolded retaining clips hold very well during highway driving. Other than the plastic clips, it's a good cover. Concerned the clips will deteriorate with the hot sun over a short period of time.
|
|
5/5 for ATA-38901 - Kwik Draw Tonneau Cover
Posted By:William M. (Sewickley) on 04/2008
This was a great purchase experience. You had what I wanted, for the best price out there and I got in a reasonable time.
|
|
5/5 for ATA-38901 - Kwik Draw Tonneau Cover
Posted By:Mike H. (Burford, ON) on 03/2008
I am very satisfied with my new Torza Soft Folding Tonneau Cover from RealTruck.com.
The shipping was fast, even to Canada and the cover was in perfect condition on arrival.
I would recommend using RealTruck.com for your accessories!
|
|
2/5 for ATA-37023 - Kwik Draw by Torza Soft Folding Truck Bed Tonneau Cover
Posted By:Kimberly S. (Portland, OR) on 03/2008
The Cover serves its purpose, but I am not impressed with the quality. The seal on the back "rubber" piece came loose so we had to repair that and the connector pieces for the crossbars continuously come loose. To be honest, if this was any other product, and easier to do, I definitely would have returned it.
|
|
4/5 for ATA-33018 - Kwik Draw Tonneau Cover
Posted By:William P. (Jackson, CA) on 03/2008
I like it. The plastic cams were a problem. Not explanied well and subject to break. I used self tapping metal screws to hold the cross bars in position.
|
|
5/5 for ATA-35002 - Kwik Draw Tonneau Cover
Posted By:Damion G. (Tampa, FL) on 03/2008
Cover is very durable and was a snug fit. Its been install for some time and there are no signs of stress or wear. Easy to fold up, easy to install/uninstall, and looks great. A must for any owner looking for a tonneau.
|
|
4/5 for ATA-31022 - Kwik Draw Tonneau Cover
Posted By:steve M. (Metairie, LA) on 03/2008
|
|
4/5 for ATA-31022 - Kwik Draw Tonneau Cover
Posted By:steve M. (Metairie, LA) on 03/2008
|
|
4/5 for ATA-37005 - Kwik Draw Tonneau Cover
Posted By:David B B. (Hartford, WI) on 03/2008
It was difficult to put together, but once together it is easy to remove, re-install, and use.
|
|
3/5 for ATA-33019 - Kwik Draw Tonneau Cover
Posted By:John K. (Pembroke Pines, FL) on 03/2008
not as easy to put together as shown in the video
|
|
4/5 for ATA-38901 - Kwik Draw Tonneau Cover
Posted By:David L L. (Santa Barbera, CA) on 03/2008
Very good solution to covering truck bed when expensive hardshell tonneau cover isn't needed. Lightweight, strong, and well designed. Easy to install and easy to remove. Folds forward into partial bed cover. Looks good on truck.
|
|
4/5 for ATA-31012 - Kwik Draw Tonneau Cover
Posted By:Stephen W M. (Cincinnati, OH) on 03/2008
Very nive top which is reasonably easy to assemble to install. Works very well keeping the truck looking nice and covering items in the weather. I have found that the front lip of my unit seems to be pushed up a bit at highway speeds and I wish the rear latches had the same lock mechanism as the front units.
|
button.
