Loading Zone Cargo Gate

Frequently Asked Questions

How is the Loading Zone™ Original Cargo Gate different from load bars?  The Loading Zone Original Cargo Gate is versatile in that it divides from the bottom cargo area to the top of the rails with no assembly or mounting hardware required. Simply lift, lock and load for a perfect cargo divider.
What is the Original Cargo Gate made from?  The cross members are constructed of 1 x 1 anodized aluminum, while the majority of the assembly is made from heavy-duty nylon plastic. The locating pins, clips and locking mechanism are of stainless steel construction, and the landing pads and feet are rubber.
How much does the Original Cargo Gate weigh?  The four (5) available models weigh between 6.5 pounds and 8.5 pounds. The smallest unit, the LZCG 1101 for compact pickup trucks, weighs 6.5 pounds. The LZCG 1301 and 1302 for midsize pickup trucks weigh approximately 7 pounds, the LZCG 1501 for full-size pickup trucks weighs 8.5 pounds, the LZCG1601 for 04+ Ford F150 weights 8.5 pounds.
How do you install the Original Cargo Gate, and what tools will I need?  No tools are needed for installation . . . and it only takes a few minutes. You simply lift the locking handle, adjust the landing posts to the nominal width of the truck bed via the locating pins, and push the Original Cargo Gate against the bed floor so the rubber feet grip. Then, depress the locking handle down until it clicks. You're done.
How does the Original Cargo Gate work?  The design of the compression cam in the handle is key. Once you adjust the landing post and press down the handle, the cam action forces the landing posts out - applying up to 300 pounds PSI against the inside edge of the bedrails. This is much stronger than the inner walls of the fender walls and provides a tremendous amount of resistance.
How much will the Original Cargo Gate hold?  The Original Cargo Gate will hold up to a 65-pound static load. It was designed to hold items against the firewall or tailgate in a snug position. This way you can be sure that your cargo is safely secured at all times and arrives intact.
How do I keep my Original Cargo Gate from being stolen?  Loading Zone has a Locking Lanyard available, which is not only a safety feature but also works as a theft deterrent.  It is made from coated aircraft cable with two loops at the end. Just feed it through the Original Cargo Gate and noose it tight while locking the other loop to the cargo cleat inside the cargo area. The Original Cargo Gate is still movable.
Does the Original Cargo Gate work with bed liners?  The Original Cargo Gate works with or without parallel ribbed bed liners. The rubber feet are adjustable so that they can be moved to fit between the ribs of the liner or between the ribs of the truck bed itself.
Does the Original Cargo Gate work with bed rugs?  Yes! The Original Cargo Gate works with bed rugs. In fact, bed rugs actually enhance the performance of the Original Cargo Gate.
Does the Original Cargo Gate work with tonneau covers and caps or camper shells?  The Original Cargo Gate will work on almost all top mounted systems. As long as the Original Cargo Gate has the ability to make contact with the side rails, without interference with the cover.
Does the Original Cargo Gate* fit all trucks and vans?  Loading Zone currently has five (5) Original Cargo Gate models that fit the majority of the trucks, vans and SUVs that are sold today (except step sides and flare sides). All have been designed to work as a cargo management system.
Can the Original Cargo Gate be used in the 2001-2003 F-150 SuperCrew?  There have been numerous purchases for the LZCG 1501B model, which fits the Ford F-150 SuperCrew 2001-2003 from the wheel wells forward.

Specifications

The Loading Zone Orginal Cargo Gate Load Divider is available in 5 models to fit virtually all pickups, suv's and minivans.  Here are the dimensions and adjustments of each gate.  Note:  When ordering, you will order by vehicle application.

LZ-CG1601       Adjustable Width 62"-65 1/2".     Height: 22 3/4"

LZ-CG1501       Adjustable Width 62"-65 1/2".     Height: 19 1/2"

LZ-CG1302       Adjustable Width 60"-64".           Height: 17"

LZ-CG1301       Adjustable Width 54 ¾"-58 ¾".   Height: 17"

LZ-CG1101       Adjustable Width 54"-57 3/4".     Height: 16"

Loading Zone Cargo Gate - How It Works

	Step 1 Place the cargo gate truck bed divider where you would like it in the truck bed
	Step 2 Lock it into place
	Step 2 Close Up Heavy duty built handle for locking
	Step 3 Load your gear!

Additional Features

	SUV Cargo Gate: The Loading Zone cargo gate even works in select SUVs and Minivans
	Anodized Aluminun: The anodized aluminum cross members add strength and protection. The gate is made of hd plastic, aluminum and stainless steel.
	Loading Zone Cargo Gate in Use: The center grid holds cargo in place while letting air flow through
	Easy To Use: The locking handle holds the Cargo Gate securely in place. The designed allows the Cargo Gate to be positioned anywhere in the truck bed.
	Great for Groceries:
	Installs in Seconds: The cargo gate can be installed or removed in seconds.
	Cargo Box Organization: Loading Zone offers a limited lifetime warranty to the original purchaser against all defects related to materials and workmanship of the Original Cargo Gate
	Two Gates:
	Use While Towing: The heavy duty design of the loadingzone cargo gate allows it to work with 5th wheel towing

Installation