Pace Edwards JackRabbit Full Metal Retracting Tonneau Covers

The Pace Edwards Jack Rabbit Full Metal retractable truck bed covers are the combination of all the great operating features of the original JackRabbit, but with an all-metal deck, making it the best-looking and the toughest retractable cover on the market. The JackRabbit Full Metal has a tough powder-coated extruded aluminum panels that are interlocked for strength and durability. The JackRabbit Full Metal is thicker, lighter and stronger than aluminum. The canister is constructed of thermoformed ABS material that will not dent or rust. The JackRabbit Full Metal lo-pro canister is completely flush with the bed rails of your truck, and provides a sleek design to enhance the look of your truck. The cover can be latched every 12" with the Latch N Lok system that provides the maximum use for your bed. The latch is also offset to the driver's side so you don't have to crawl into the box to lock the cover when open. The JackRabbit Full Metal's continuous tension spring allows the cover to be closed with the least amount of effort.

• ALL Metal Cover:  Jackrabbit Full Metal has a "Full Metal" or all-aluminum cover that is made of tough powder-coated extruded aluminum panels that are interlocked together for strength and durability.  The cover then retracts into the canister at the front of the bed.
• Latch N Lock Operation:  The cover opens and closes in seconds.  The weather-sealed, low-profile Latch N Lok operating system allows the cover to be latched every 12" providing maximum use of your truck bed.  The Latch N Lock is offset to the drivers side so you don't have to crawl into the truck bed to lock or latch the cover.  (Please note: a tailgate lock is needed to lock the tailgate, which is sold separately)
• Low Profile Cover & Canister:  Flush with the top of the bed rail, Pace Edwards low profile canister design provides a sleek look that enhances the beauty of your pickup truck.  Low Profile Compact Canister:  The all-metal cover retracts into the low-profile compact canister.  This canister is lighter and stronger than aluminum.  Pace Edwards canisters are made of thermoformed ABS, a composite material widely used in exterior truck accessories because it won't dent or rust.
• Saves Gas: The low-profile, flush aerodynamic design increases fuel economy up to 11% .
• Normal Tailgate Operation:  The tailgate operates independently of the cover.  You may want to purchase an optional tailgate lock to secure your tailgate.
• Continuous Tension Spring: Pace-Edwards exclusive continuous tension spring allows the JackRabbit to be closed with the least amount of effort in the industry.  Over 50% less effort than some of our competitors.
• Speed Clamp No Drill Install:  No-drill, self-adjusting clamp-on design (most applications) for installation in about 60 to 90 minutes. Add about 30 minutes if you have an over-the-rail bedliner.  (see Specs tab and Installation tab for additional information) 
• Toughest & Best Looking:  Combining the great operating features of the original jackrabbit cover with the strength of the all-metal deck, JackRabbit Full Metal is the toughest, best looking retracting bed cover on the market
• All Purpose Cover:  Opens in seconds when you need your truck bed for easy accessibility or hauling large items.  Plus it works well with 5th wheel trailer hitches.   
• 3 Year Warranty:  Made by Pace Edwards Company, the orginators of the hard retracting truck bed cover.  Backed by Pace-Edwards full 3-year warranty

Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

How does the Full-Metal JackRabbit work?  The Full-Metal JackRabbit cover slides along rails mounted to the sides of the truck bed into a canister at the front of the truck bed. The Full-Metal JackRabbit blanket rolls around a reel inside the canister with the help of a coil spring which maintains tension on the cover at all times making it easy to open. The canister measures 9.6” wide by 9.66” high.

What is the Full-Metal JackRabbit “blanket” made of?  The Full-Metal JackRabbit is manufactured out of heavy gauge extruded aluminum panels with a black textured powder coat finish for increased strength and durability that are fastened together with a patented silicone hinge seal.

Will the cover keep the truck bed dry? What about ice and snow?  The Full-Metal JackRabbit is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the top of the cover, however water may intrude into the bed via components that are not part of the Full-Metal JackRabbit such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof and have never heard of a competitors cover that is either. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof.   Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.

Is the cover hard to install? How long will installation take?  Installation is easy. All parts are an exact match to your truck – no cutting necessary! JackRabbit covers are installed with our patented SpeedClamp™ system on most applications. Installation should take 15 minutes for the professional and under 30 minutes for a first time installer. See the installation tab for complete instructions.

How does the Full-Metal JackRabbit lock?  The Full-Metal JackRabbit locks with a key Offset to the driver’s side near the tailgate. The key turns arms that lock into the side rails mounted on the sides of the truck bed. The Full-Metal JackRabbit can be locked in place at 12 inch intervals along the truck bed.

Will the cover improve my gas mileage? How?  our gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. See the press release information attached on gas mileage savings. Input from customers and our own experience bear out the accuracy of this claim.

Will the cover work with my bedliner?  The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See Bedliner modification attached.  Please call our Technical Support Reps for information regarding fit with your bedliner.

Is there a warranty on the Full-Metal JackRabbit?  Yes, there is a three-year factory defect warranty on all parts.

Full-Metal JackRabbit™ Care and Maintenance:  To assure quiet, smooth operation, apply a small amount of grease to the wear strips where the metal end of the panels and the wear strips meet. This initial application should be sufficient for a year or more. Regrease the wear strips if the cover begins squeaking during use.   It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition.   After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the Full-Metal JackRabbit is set at least 1/8” on each side.   Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister.   To help keep the Full-Metal JackRabbit retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However due to the hammer texture, removal of wax can be difficult so you should not wax your cover.

If you have any questions please call our Technical Support 7-Days a week at (877)-216-5446.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader