Pace Edwards JackRabbit Hard Retracting Tonneau Bed Covers

Pace-Edwards JackRabbit retractable hard truck bed tonneau covers retracts automatically using a pull strap and opens and closes without needing the key.  The Jack Rabbit truck bed covers are fully lockable.  The Jack Rabbit truck bed covers have padded polymer top cover that is laminated to hard rigid aluminum panels.  It glides smoothly along the black powder coated side rails.  The Jack Rabbit retracting hard tonneau cover has locking positions every 12 inches and automatically catches into each position as you pull it forward. JackRabbit™ Tonneau has a low profile aerodynamic design that is 100% flush mounted with texture finish rails and top cover.  The JackRabbit Truck Cover has a speed clamp-on installation design and for easy accessibility. The handle and lock are mounted to the driver's side. Available for GMC, Ford, Lincoln, Dodge, Honda Ridgeline, Toyota, Nissan, Isuzu, Mitsubishi and Mazda pickup trucks. Drive your pickup with Style, Choose Pace-Edwards Truck Bed Covers.

• Vinyl Over Aluminum:  Weather resistant padded polymer vinyl cover is laminated to the hard rigid aluminum panels.  The cover glides smoothly along black powder-coated side rails
• Gas Savings:  The low profile, flush aerodynamic design increases fuel economy up to 11% . 
• Superior scratch resistant finish on aluminum trim.  Plus it has multiple locking positions (every 12 inches) on long and short bed versions
• Latch N Lock Handle:  The Jack Rabbit ™ retractable cover opens and closes with this latch-handle system.  It is off-set to driver side.  Just unlock it and turn the latch.  The latch locks and unlocks the cover.  Each cover comes with 2 keys.  The latch holds the cover firmly in place whether you lock the cover with a key or not.
• Pull Strap:  The premium latch and lock mechanism has a built in pull strap; comes standard on JackRabbit™ tonneau covers
• Normal Tailgate Operation:  The tailgate operates independently of the cover.  You may want to purchase an optional tailgate lock to secure your tailgate. 
• Heavy-Duty Retract Spring:  The premium springs helps the tonneau cover retract smoothly and easily
• SpeedClamps Installation:  No-drill, self-adjusting clamp-on design (most applications) for installation in about 60 to 90 minutes. Add about 30 minutes if you have an over the rail bedliner.  (see Specs tab and Installation tab for additional information).  SpeedClamps:  The Jack Rabbit™ tonneau features the patented self-leveling SpeedClamp installation system.  This installation system makes Jack Rabbit the easiest to install hard retracting cover.
• All Purpose Cover:  Opens in seconds when you need your truck bed for easy accessibility or hauling large items.  Plus it works well with 5th wheel trailer hitches.   
• 3 Year Pace-Edwards Warranty:   The orginators of the hard retracting truck bed cover.  Backed by Pace-Edwards full 3-year warranty.
• Optional Explorer Series Rails:  The JackRabbit™ retractable hard tonneau is also available with optional Explorer Series Rails.  The JackRabbit with Explorers Series Rails allow you to use your JackRabbit with the Pace-Edwards Contractors Rig, Utility Truck Rack, ProRac & Thule Load Bar Products with Accessories.  Please see the specific product pages for complete details. 

Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

How does the JackRabbit work?  The JackRabbit cover slides along rails mounted to the sides of the truck bed into a canister at the front of the truck bed. The JackRabbit blanket rolls around a reel inside the canister with the help of a coil spring which maintains tension on the cover at all times making it easy to open. The canister measures 9.75” wide by 11” high.
What is the JackRabbit “blanket” made of?  The JackRabbit blanket consists of interlocking aluminum panels bonded to a polymer composite material. This special blend of textured polymer material will provide a long life while maintaining flexibility at sub-freezing temperatures.
Will the cover keep the truck bed dry? What about ice and snow?  The JackRabbit is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the one-piece polymer top, however water may intrude into the bed via components that are not part of the JackRabbit such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof and have never heard of a competitors cover that is either. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof.. Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.
Is the cover hard to install? How long will installation take?  Installation is easy. All parts are an exact match to your truck – no cutting necessary! JackRabbit covers are installed with our patented SpeedClamp™ system on most applications. Installation should take under 1 hour for the professional and 1½ -2 hours for a first time installer. See the installation tab for additional information.
How does the JackRabbit lock?  The JackRabbit locks with a key Offset to the driver’s side near the tailgate. The key turns arms that lock into the side rails mounted on the sides of the truck bed. The JackRabbit can be locked in place at 12 inch intervals along the truck bed.
Will the cover improve my gas mileage? How?  Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. See the PDF of the press release information on gas mileage savings report. Input from customers and our own experience bear out the accuracy of this claim.
Will the cover work with my bedliner?  The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See PDF of the Bedliner modification sheet below . Please call our Technical Support Reps for information regarding fit with your bedliner.
Is there a warranty on the JackRabbit?  Yes, there is a three-year factory defect warranty on all parts. See Pace Edwards warranty attached below in a PDF.
JackRabbit™ Care and Maintenance:  To assure quiet, smooth operation, apply a small amount of grease to the wear strips where the metal end of the panels and the wear strips meet. This initial application should be sufficient for a year or more. Regrease the wear strips if the cover begins squeaking during use.  It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition.  After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the JackRabbit is set at least 1/8” on each side.  Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister.  To help keep the JackRabbit retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However you should not wax your cover. Using a citrus-based vinyl cleaner and protectant such as Pace Edwards Brand or the 303 brand will keep your cover looking like new. Alcohol, petroleum based or silicon-based cleaners such as Armor-All should be avoided and ARE NOT recommended for our covers.  JackRabbit Cover Technical Support:  If you have any questions please call our Technical Support at 877-216-5446Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

By having a Pace-Edwards Cover on your truck, the average increase in fuel economy is 11%.  Listed below are the covers manufactured by Pace-Edwards Company, the originators of the hard retracting truck bed cover.  For additional information, please call 7-days a week 1-877-216-5446 or 701-253-5906 or email cs@realtruck.com

		--Roll Top Cover--	--JackRabbit--	--BedLocker--
	Exposed aluminum slat blanket	No	No	Yes
	Padded polymer blanket	Yes	Yes	No
	Electric w/ remote control	No	No	Yes
	Electromagnetic brake	No	No	Yes
	Multiple latching/locking positions	Yes	Yes	Yes
	Independent latch & lock mechanism	No	Yes	N/A
	Lock Cover	Yes	Yes	Yes
	Pull strap	Yes*	Yes	N/A
	No-drill installation	Yes*	Yes	Yes
	Self-leveling clamps	Yes*	Yes	Yes
	Low profile, aerodynamic design	No	Yes	Yes
	Textured powder-coat finish	No	Yes	Yes
	Smooth powder-coat finish	Yes	No	No
	Installation time	1hr	1hr	1hr
	(approximate average)
	UPS shippable	Yes	Yes	Yes
	Warranty	1yr	1yr	1yr
	Number of available applications	80	59	60
	Number of available SKUs	33	28	28

*Optional equipment. See application guide.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader