Features

• 2,000lb Capacity
• 12 Volt DC Electric Winch
• 5/32" x 49' Wire Rope and Heavy Duty Latched Hook with Rope Thimble
• Handlebar Mount Switch
• Pulley Black, D Shackle
• Roller Fairlead.
• Powers Load In and Power Out
• Differential Planetary
• Pull and Turn Freespooling Clutch, Low Amp, Permanent Magnet Motor, Circuit Breaker Protected

Superwinch LT Series ATV Winch Frequently Asked Questions

Choose the Right Winch and Install it properly.  First choose an installation site accessible to you. Align an unobstructed path to the car that you are loading. Prevent any metal-to-metal contact with the wire rope. Mount the winch close enough to the trailer’s front to pull the vehicle completely on. If it’s mounted under something, such as a toolbox, leave enough space to access the winch.  See Below for Trailer Tips.  Consider a pulley block. With a hook for mounting and a pulley for the wire rope, a pulley block lets you offset the winch but retain a straight shot. A pulley block can also be used to nearly double the winch’s capacity by simply attaching the pulley block’s hook directly to the load and the winch’s hook to a sturdy mount near the winch.  Wire it right.  A trailer wiring kit, like the kind available from Superwinch, makes it easy to get power for the winch from the tow vehicle’s battery.  To maintain electrical performance from the battery to the winch, we recommend dropping 3 wire sizes for every doubling of the length of the standard wire harness. Example: No. 6 to No. 3 or 2 gauge. A quick disconnect plug for the truck comes prewired with a negative lead. Simply install the special terminal to the positive side of the quick disconnect and position the plug at the rear of the truck, perhaps under the bumper.  If your tow vehicle isn’t equipped with a towing package that includes a dual-wire ground setup, Superwinch recommends installing the negative battery terminal strap provided with their winches. Take care that your wiring has fully secured leads which are clear of hot or moving parts.
Know Your Rolling Weight: For safe and sure loading, Superwinch recommends following the car and trailer load chart below. Find the column that matches your percentage of slope or grade. Determine the slope by dividing the amount of your ramp’s rise by the ramp’s length. Match the slope with the nearest weight of your car, always rounding up, and locate the corresponding winch Rated Line Pull (RLP)*. This guide is recommended for average vehicle rolling loads. Some applications may require larger winches than indicated.
Trailer Tips: Accessorize For Safety.  Maximizing winch safety and performance is as simple as attaching the proper accessories. Superwinch offers roller fairleads, recovery straps, gloves, and many more accessories designed for your special needs. * RLP - The weight the winch could pull perpendicular to the ground with a single line on the first layer of wire rope on the drum.

Car Trailers/Rolling Weight

Superwinch LT Series ATV Winch Specifications

		Line Pull lbs./kg	Line Speed FPM (m/m)	Motor Amps 12V
		0	10.0 (3.0)	10
		500 (227)	8.0 (2.4)	25
		1,000 (454)	6.5 (2.0)	50
		1,500 (680)	4.8 (1.4)	70
		2,000 (907)	2.5 (0.8)	100

		Rated Line Pull (Bottom Layer)	2,000 lb. (907 kg)
		Motor	1.0 hp (0.8kW) PM Motor, 12V DC
		Gearing	Differential Planetary
		Gear Ratio	153:1
		Braking	Dynamic
		Freespooling Clutch	Pull and Turn Action
		Wire Rope	5/32" x 49' (3.9mm x 15m)
		Dimensions	11.0” l. x 4.1” d. x 4.1” h.
			(285mm l. x 105mm d. x 105mm h.)
		Drum Diameter	1.25” (31.8mm)
		Drum Length	2.83” (72.0mm)
		Installed Weight	14.5 lb (6.6 kg)
		Ship Weight	19.4 lb (8.8 kg)
		Switching Method	Handle Bar Mounted Rocker
		Switching Mechanism	Protected Relay
		Roller Fairlead	Standard, 4-way (Requires Mount Kit)
		Color-Coded Wiring	Yes

		2”x 6’ Tree-Saver Strap	1509
		2”x 20’ Tree-Saver Strap	2517
		1”x 8’ Tree-Saver Strap	2302284

Superwinch LT Series ATV Winch Warranty

SUPERWINCH Limited One Year Warranty
Winch Model: LT2000
LIMITED ONE YEAR WARRANTY WINCH MODEL: LT2000
Superwinch, Inc. (“Seller” or “Superwinch”) warrants to the original retail buyer only (“Buyer”) that mechanical and electrical components of the genuine SUPERWINCH® Winch Model listed above (“Product”) shall be free from defects in materials and workmanship for one year from the provable date of purchase. Any Product that Superwinch determines to be defective will be repaired or replaced at Superwinch’s sole discretion without charge to Buyer
upon Buyer’s compliance with these procedures. Seller or its Authorized Agent may make reasonable charges for parts and labor for repairs not covered by this Limited Warranty. The warranties set forth herein are exclusive and in lieu of all other warranties, whether oral or written, express or implied. Online registration of your product and helpful troubleshooting information is available at www.superwinch.com. When contacting Seller, Buyer shall
mail, ship or otherwise deliver to Seller at the address noted below or to a Factory Authorized Service Center: (1) the Product; (2) a written description of the problem; (3) Buyer’s name, address and telephone number; and (4) a copy of the original sales receipt. Mail, ship or otherwise deliver the Product, required information and copies to Seller, postage or shipping prepaid. Repair and/or replacement of the Product is the sole and exclusive remedy for Buyer. This warranty does not apply to defects in any Product caused by: (1) normal wear and tear; (2) failure to comply with any installation, operation or maintenance instructions provided by Superwinch including but not limited
to subjecting the Product to loads in excess of the load listed in the Owner’s Manual or instructions for the particular Product and model number; (3) commercial or industrial use; (4) alteration or modification by parties other than Superwinch; (5) misuse, abuse, neglect, accident, Acts of God or terrorism; or (6) other causes beyond the control of Superwinch after delivery of the Product by Superwinch to its authorized distributor. If any model or sample
was shown to Buyer, such model or sample was used for illustrative purposes only and shall not be construed as a warranty that the Product shall conform to the sample or model. To the fullest extent permitted by applicable law, the following are hereby excluded & disclaimed: (1) All warranties with respect to the wire and synthetic rope, whether sold alone, with or used in or incorporated in any Product. (2) All warranties with respect to the Product’s finish.
(3) All warranties of fitness for a particular purpose.(4) All warranties of merchantability. (5) All claims for consequential or incidental damages, including damage caused by or during the removal or reinstallation of the Product. Some states or jurisdictions do not allow limitations or exclusions in consumer transactions, and these limitations or exclusions may not apply to Buyer. The warranty gives Buyer specific legal rights and there may be others. If a warranty is deemed to apply to this Product, it shall be limited for a period of one (1) year from the provable date of purchase of the new Product. NO agent, dealer, distributor or employee of Seller is authorized to make modifications to this warranty, and no such statements, whether oral or written, shall be binding on the Seller.
Superwinch, Inc reserves the right to change Product design without notice. In situations in which Superwinch has changed a Product design, Superwinch, Inc shall have no obligation to upgrade or otherwise modify previously manufactured product.