Airaid Air Filter Oil, Air Filter Oil

This kit includes both AirAid Cleaning Solution and AirAid Performance Oil. The Performance Oil comes in either a 8 ounce Aerosol or a 8 ounce squeeze bottle. The AirAid Cleaning Solution comes in a 12 ounce spray bottle.
AIRAID® CLEANING SOLUTION: is uniquely formulated to clean without damaging the gauze filter media.
AIRAID® PERFORMANCE OIL: The performance oil forms an additional line of defense against dirt without limiting airflow.
The Cleaning Solution is uniquely formulated to clean without damaging the gauze filter media. To use just gently shake off and brush away excess dirt. Spray on AirAid Cleaning Solution so that the filter is fully saturated, and let soak for 10 minutes. Rinse filter from the clean side to the dirty side until water comes through clear. Allow filter to dry.
The Performance Oil forms an additional line of defense against dirt without limiting airflow. To use you make one careful application of AirAid Performance Oil to each filter pleat. Allow oil to seep into filter for 20 minutes. Re-oil any areas that still appear dry.
Simple to use as pointed out up above. Just follow those easy steps and you will be very satisfied with the performance of your AirAid or other aftermarket air filter.

Air Filter Cleaing Kit
	Keep your filter clean This kit allows you to clean your air filter, restore air flow effieciency and ultimately maintain optimum engine performance.
	No Hassle Lifetime Warranty We believe this is the finest air filter you will ever own, and we stand behind it. Our "No Hassle Warranty" is simple. If you are ever dissatisfied with the materials, workmanship or performance of this air filter, just send it back for replacement. You don't have to worry about a proof of purchase or a warranty card. AIRAID filters are warranted for life
	AA-790-550 Air Filter Cleaner Kit AIRAID® CLEANING SOLUTION: is uniquely formulated to clean without damaging the gauze filter media. AIRAID® PERFORMANCE OIL: AirAid Performance Oil forms an additional line of defense against dirt without limiting airflow. Complete Cleaning Kit - 8 ounce Squeeze Air Filter Oil and 12oz Spray Cleaner. AIRAID® CLEANING SOLUTION is uniquely formulated to clean without damaging the gauze filter media. AIRAID® PERFORMANCE OIL AirAid Performance Oil forms an additional line of defense against dirt without limiting airflow.
	AA-790-551 Air Filter Cleaning Kit Complete Cleaning Kit - 8 ounce Aerosol Air Filter Oil and 12oz Spray Cleaner. Note: can only be shipped ground service. AIRAID® CLEANING SOLUTION is uniquely formulated to clean without damaging the gauze filter media. AIRAID® PERFORMANCE OIL AirAid Performance Oil forms an additional line of defense against dirt without limiting airflow.
	AA-790-554 Air Filter Cleaner Air Filter Cleaner - 12 ounce spray bottle. AIRAID® CLEANING SOLUTION is uniquely formulated to clean without damaging the gauze filter media.
	AA-790-555 Squeeze Oil Air Filter Oil - 8 ounce squeeze bottle. AIRAID® PERFORMANCE OIL AirAid Performance Oil forms an additional line of defense against dirt without limiting airflow.
	AA-790-556 Aerosol Oil Air Filter Oil - 6.25 Aerosol spray. Note: Can only be shipped ground service. AIRAID® PERFORMANCE OIL AirAid Performance Oil forms an additional line of defense against dirt without limiting airflow.
	Step 1 - Clean Gently shake off and brush away excess dirt. Spray on AirAid Cleaning Solution so that the filter is fully saturated, and let soak for 10 minutes. Rinse filter from the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.
	Step 2 - Dry Allow filter to dry. A fan may be used to speed process. DO NOT use heated air blowers, compressed air, or open flame.
	Step 3 - Apply Make one careful application of AirAid® Performance Oil to each filter pleat. Allow oil to seep into filter for 20 minutes. Re-oil any areas that still appear dry. Do not over oil.

MAINTENANCE TIPS:

CLEAN:
Clean your AirAid® filter every 30,000 to 50,000 miles for normal driving, and more
often for off-road and heavy dust conditions.
CHECK YEARLY:
If your annual mileage is low, check filter once a year to see if oiling is needed.
USE ONLY AIRAID CLEANING SOLUTION:
Use only AirAid® Cleaning Solution to clean your AirAid® filter. Never use gasoline, detergents, steam cleaning
or parts solvent.
OIL AFTER CLEANING:
Your AirAid Premium Filter is pre-oiled and ready to use out of the package. Always oil your AirAid Premium Filter after each cleaning. Use only AirAid Filter Performance Oil. No transmission fluid, motor oil, diesel fuel, or light weight oils.
DO NOT OVER OIL!

Cleaning your air filter is easy with an Airaid air filter cleaning kit. Here are some suggestions for making cleaning your filter even easier.

Gently shake off and brush away excess dirt.
Spray on AirAid Cleaning Solution so that the filter is fully saturated, and
let soak for 10 minutes.
Rinse filter from
the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.

Allow filter to dry. A fan may be used to speed process.
DO NOT use heated air blowers, compressed air, or open flame.

Make one careful application of AirAid® Performance Oil to each filter pleat.
Allow oil to seep into filter for 20 minutes.
Re-oil any areas that still appear dry.
Do not over oil.

	Step 1 - Clean Gently shake off and brush away excess dirt. ,Spray on AirAid Cleaning Solution so that the filter is fully saturated, and ,let soak for 10 minutes. ,Rinse filter from ,the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.
	Step 2 - Dry Allow filter to dry. A fan may be used to speed process. ,DO NOT use heated air blowers, compressed air, or open flame.
	Step 3 - Apply Make one careful application of AirAid® Performance Oil to each filter pleat. ,Allow oil to seep into filter for 20 minutes. ,Re-oil any areas that still appear dry. ,Do not over oil.

	Step 1 - Clean Gently shake off and brush away excess dirt. ,Spray on AirAid Cleaning Solution so that the filter is fully saturated, and ,let soak for 10 minutes. ,Rinse filter from ,the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.
	Step 2 - Dry Allow filter to dry. A fan may be used to speed process. ,DO NOT use heated air blowers, compressed air, or open flame.
	Step 3 - Apply Make one careful application of AirAid® Performance Oil to each filter pleat. ,Allow oil to seep into filter for 20 minutes. ,Re-oil any areas that still appear dry. ,Do not over oil.

Ordering

Manufacturer Information