Pilot Automotive GPS Portable Global Positioning Navigation System
	Easily viewable Day or Night It is easy to read with the ultra responsive 3.5 inch full color, super bright touch screen panel with built-in Stylus for touch screen operations. Get a clear anti-glare view under direct sunlight! Handy Day or Night color auto switch with adjustable color settings.
	Front View The Pilot Automotive GPS Portable Global Positioning Navigation System allows for easy and accurate travel or locating your destination. The Pilot GPS is an easy direct plug-in for your vehicle. Just switch it on and go!
	Extends and Tilts This unit has both 2D and 3D view options, and super intelligent Map Zoom and tilt system.
	Versatile mounting Installs easily with a windshield suction mount for the cradle, and a vibration free suction mount support. This GPS System is ready to roll with a preloaded map database of North America (US and Canada) and 12 million points of interest!
	Antenna and Carrying Case Included Satellites help guide you with the NAV900's built-in high sensitivity GPS antenna and 20 channel GPS receiver. When you get where you are going, pack up the screen for security in the included carrying case.

1.     How can I power On/Off the device?
Press and hold Power button for 3 seconds to turn the device On/Off. Press for 1 second to switch the device into/back Standby mode. The device still draws a small amount of power from battery in Standby Mode.

2.     Why my GPS screen go dark when the power cord is not plugged in?  Why it go to Power save/sleep mode?
The Screen Saver mode will be activated if your Car charger/Power cord is not plugged in after 5 minutes. You can touch your GPS screen to recover. If you don’t recover Screen Saver mode and it will go to Standby Mode after 10 minutes if your power cord is still not plugged in. To turn it back on, please press power button for 1 second to switch back to Normal Mode.
 
3.     How can I set my destination?
There are 2 ways you can find your destination.
a. In main menu,
• Tap “Find n Go” and then screen will show “Address”.
• Tap “Address” to find an address.
• In the next screen, it shows “Recent Cities” and the first line of list shows the city (or State) you are in.
• If the destination city is on the list, tap it.
• Tap “Other City” if your destination is not displayed. This will take you to the screen where you can specify a new city.
• Using the keyboard start entering the name of the destination city, then select from the list of matching city names.
• Tap “Change State” to search for a city in a different state.
• To search for a city in a different country, tap “Change Country”
• After selecting the city, start entering the name of the street. Once your entry matches the first five letters of the street name or less, all results will be displayed on the screen automatically.
• Tap “Done” any time to display a full list of matching streets immediately.
• From the list of matching street, using the Left and Right Button to select and  tap the one matching your destination.
• With city and street selected, house number is the next.
• Use the Numeric keyboard to enter the house number or tap “Find intersection” to select one of the cross streets, And tap “Done” when finished.
• Once you complete setting the destination, the route will be immediately planned and you can start driving right away.

b. In the Cockpit or Map mode,
• Tap Menu, in Find section and screen shows “Address”.
• Tap “Address” to find an address.
• In the next screen, it shows “Recent Cities” and the first line of list shows the city (or State) you are in.
• If the destination city is on the list, tap it.
• Tap “Other City” if your destination is not displayed. This will take you to the screen where you can specify a new city.
• Using the keyboard start entering the name of the destination city, then select from the list of matching city names.
• Tap “Change State” to search for a city in a different state.
• To search for a city in a different country, tap “Change Country”
• After selecting the city, start entering the name of the street. Once your entry matches the first five letters of the street name or less, all results will be displayed on the screen automatically.
• Tap “Done” any time to display a full list of matching streets immediately.
• From the list of matching street, using the Left and Right Button to select and  tap the one matching your destination.
• With city and street selected, house number is the next.
• Use the Numeric keyboard to enter the house number or tap “Find intersection” to select one of the cross streets, And tap “Done” when finished.
• The screen will show your destination and then tap “Route to”. The route will be immediately planned and you can start driving right away.

For More finding an address detail, please see the quick user guide or user manual CD in section 6.3.1. Page 77.
 
4.     How can I adjust time for different time zone or adjust time different?
You can go Main menu and tap settings, you will see “Languages & Units”. Tap it and you can find “Set date & Time format” in next page. Tap it and you can adjust your time zoon. Or you can go Main Menu, Tap GPS Dash icon and screen will show GPS Data. Tap “Time Sync” at up-right corner. It will show “The Time setting page” and it will allow you to adjust local time by taping “+” or “-“.
 
5.     How can I change my program language?
In Main Menu, Tap “Settings” and tap “Language & Units”. Under program Language, You will allow to adjust program language by taping the current language bar.

6.     How can I change my guiding voice language?
In Main Menu, Tap “Settings” and tap “Language & Units”. Under Voice Language, You will allow to adjust Voice language by taping the current language bar.

7.     On the Screen it shows No GPS Signal, what should I do?
First, make sure you are outdoors in an open space and not under any building or cover, including your garage. Restart your GPS again. You device should receive GPS signals within a few minutes.
Your device will usually acquire a GPS fix faster if your vehicle is stationary.  It is more difficult to acquire a signal while driving.  Your device may have trouble acquiring a GPS signal for several reasons:

• Device does not have a clear view of sky
• Extreme weather such as clouds and storms
• Driving in mountainous regions or urban areas with tall buildings
• If your device fails to acquire a GPS signal for several minutes, you can restart the device.   If your device consistently fails to acquire a GPS signal over several days even when none of the above conditions exist please submit an issue detailing the area you are traveling in by contacting our customer service.

8.     How long it takes to get GPS signal?
Under normal weather condition and complete outdoor situation, your Navfly GPS device should receive GPS signals within a minute. But sometime it may take few more minutes.

9.     How to setup my HOME and WORK address?
For the first time to set up your Home and Work Address, you can just tab MENU, under Find menu and tab HOME and WORK icons to set up your address. If you want to edit your Home or Work Address, you can go Main MENU, under “Settings”, tab “General” and you will find “Set your Favorite destination” to edit your Home or Work address.

10.            What is different between COCKPIT and MAP?
The less detailed the map, the faster NAVFLY Navigator can draw and move it. You will find that NAVFLY Navigator has a very fast graphic engine that is capable of moving even detailed maps at high speed. Yet you may experience that the performance of some old PND models can be enhanced by decreasing the amount of detail on the map.

This setting has three values: More detailed, Normal, Less detailed (fast). They influence when NAVFLY Navigator hides and shows certain map features when zooming in or out. Setting a higher detail level will result in objects appearing sooner when zooming in.

Although the map visualization of NAVFLY Navigator is basically the same in Map and Cockpit modes, you can set a different map detail for each one, so the map is better suited for the purposes of that screen.

Having explained the contents of the map, the description of the other parts of the map screens follows. There are two map screens: the Map screen and the Cockpit screen. The way they show the map is the same but their look and controls are optimized for different purposes.

The Map screen is to be used mainly without a GPS, to browse the map, create user POI items, or to plan your route based on map points. The Map screen is designed to give you the maximum map area. This screen is usually used in 2D North-up mode (you can set NAVFLY Navigator so it always opens the Map screen like that ).

The Cockpit screen is for driving purposes. Besides showing the map, it contains some additional travel information if you are just cruising (speed, current street your are driving in, speed limit for the current street), and some more route data if you are navigating (e.g. next street in your route, distance to travel, type of the next route event). This screen is typically used in 3D Track-up mode (you can make NAVFLY Navigator always open the Cockpit screen like that ).

There are several controls that function in a similar fashion on the two screens.

 11.            What is my Navfly GPS Screen content meaning?

Map screen contents:

Cockpit screen contents:

No.	Display	Control
1	(Cockpit only) Turn preview*	Opens Route menu*
2	n/a	Zooms in (optional)
3	n/a	Zooms out (optional)
4	n/a	Tilts down (optional)
5	n/a	Tilts up (optional)
6	Indicates that Lock to GPS position and heading is inactive	Re-enables Lock-to-Position / Smart Zoom
7	Selected map point (Cursor)	Opens Popup Info and Cursor menu
8	(Map only) Map scale	Zooms in/out by dragging
9	n/a	Menu (Find, Quick, Route, Main)
10	Map orientation and Overview	Switches North-up, Track-up and Overview
11	GPS position quality	Opens GPS Data screen
12	Battery status	Opens settings
13	Sound on or muted	Enables/disables muting
14	Track Log recording or playback	Opens Track Log screen
15	n/a	Opens Cursor menu
16	(Cockpit only) Current street	Opens Route Information screen
17	(Cockpit only) Travel and Route data**	Opens Route Information screen
18	(Cockpit only) Distance to next turn***	n/a
19	(Cockpit only) Next street***	n/a
20	(Cockpit only) Approaching next turn****	n/a

* On Map screen only when a route is active

** Contents differ when a route is active

*** Only appears when a route is active

**** Only appears when a route is active and the next turn is near

12.            How can I delete the route I set earlier?

You can go MENU, tab “Route” and then “Delete”.

13.            What does “Lock” or “Follow” mean?
As described at the map screen functions, you can move, rotate, tilt and zoom the map during navigation. In these cases a Lock or Follow icon (Error! Reference source not found.) appears on the screen.

When you rotate, tilt or zoom the map, that part of Smart Zoom is automatically deactivated; the map will still follow your position, but will not change the view parameter you have modified. You can return to the full Smart Zoom mode by tapping the Lock or Follow button.

If you move the map, all parts of Smart Zoom become deactivated, and the view freezes. Tapping the Lock or Follow button makes NAVFLY Navigator follow your position again (Lock-to-Position) and also re-enables Smart Zoom.

You can make NAVFLY Navigator push the Lock or Follow button for you automatically after a few seconds of inactivity.

14.            How can I set “Car pool”?
Inside Main MENU, tab “Settings” and then tab “Advance”. You will find Route Option. Under Route Option, you can select or deselect “Car Pool”.

 15.            How can I adjust the sound of voice and key?
Tab Main MENU, You can find “Sound” settings. Tab it, you will see Sound settings on this page determine the way NAVFLY Navigator sounds.

                                                              i.      Master sound volume/switch The loudness of NAVFLY Navigator is independent of your PND settings. When you run NAVFLY Navigator, the position of this fader determines the device volume level. When you exit the program, the device settings return.

The left part of this control works as a mute button. Tap to mute all NAVFLY Navigator sounds. This works in tandem with the Mute button (Error! Reference source not found.) on the map screens. Switching one of them will change the status of the other.

                                                            ii.      Voice guidance volume/switch The switch on the left can turn on or mute NAVFLY Navigator's audible guidance. When turned on, the slider on the right will adjust the loudness of voice prompts. In its leftmost position the voice guidance is suppressed, in its rightmost position the master volume applies.

                                                          iii.      Key sound volume/switch The switch on the left can turn the key sounds on or off. Key sounds are audible confirmations of tapping the touch screen. When key sounds are turned on, the slider on the right will adjust their loudness. In its leftmost position the key sounds are suppressed, in its rightmost position they are played at the master volume level.

                                                         iv.      Dynamic Volume When driving at high speed, the noise in the car may be too loud to clearly understand the voice guidance messages and to perceive the key sounds. Using Dynamic Volume you can instruct NAVFLY Navigator to increase the volume when your speed exceeds a certain minimum, and reach its highest volume (determined by the Master volume slider in Sound settings) at the given maximum speed.

Tap the Dynamic Volume button to turn on the feature. This will also open the screen where you can set the minimum and maximum speeds.

                                                           v.      Attention Tone If this is set to Disabled, the voice guidance will sound without a preceding attention tone. Setting it to Single Tone will initiate a single attention tone before the instructions, while Double Tone will use a double tone.

 

16.            How can I adjust display back light setting?
Inside Main MENU, Tab “Settings” and then tab “Advance”. You will find “Backlight Settings” Here you can set how backlight behaves when using NAVFLY Navigator.

 17.            How can I choose different route setting? What is the route parameter for? What is the different between Fast, Short and economical route?

You can go Main MENU and then tab “Settings”. You will see “Route parameter” settings

This is a very important function. Settings here determine how routes will be calculated. This screen is directly accessible from the Route Information screen

PILOT GPS

The Finest Art of Portable All-in-one navigation system

                                                            

NAV900 Product Features and Specification.

Features:

• Super Bright 3.5" 16.7 Million Color Touch Screen, With 120 Degree View Angle
• Easy Touch Screen Operation
• Clear View Under Direct Sunlight, Anti-Glare
• 2GB SD Card With Preloaded 2007 Map From Tele Atlas, Including 50 US States, Puerto Rico and Canada
• 12 Million Point Of interest (POI), with Quick Search Function ~Built-in SiRF Star III 20 Channel GPS Chipset With WASS System
• Super Fast Acquisition Time: Warm Start 1 Second, Cold Start 30 Seconds With Embedded Active High Sensitivity Antenna
• Accurate GPS positioning
• Advance Voice Navigation By DTS System
• Fastest Route And Miss Turn Re-Route Calculation By 32-Bit CPU Processor
• Multi-Route Selection: Fastest, Shortest, Economical, Toll road, Ferry and Carpool
• Multi-Type Vehicle Selection: Car, Taxi, Bus, Truck, Emergency, Bicycle and Pedestrian
• Built-in over 20 languages. US English, UK English, Croatian, Czech Danish, Dutch, Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Slovakian, Spanish, Swedish, Turkish, Chinese Voice.

Specification:

Operation System:         Windows CE .net 4.2

CPU:                             Freescale MX21 266MHz 32 bit microprocessor

GPS Receiver:               SiRF Star III sensitivity chip, 20 GPS receiver channels.

Antenna:                       Built-in internal antenna and external connector (MMCX)

Internal Memory:           SDRAM 64MB, NOR Flash 8MB, NAND Flash 64MB.

Audio:                           Internal speaker 1W with 3.5mm stereo earphone jack

Power Source:               Mini USB connector DC 5.0V/ 500ma.

Battery:                                    Rechargeable Li-Polymer battery 2000mah,

Continuous operation time 6~8 hours, charging time 4~6 hours.

Interface:                      1 SD/MMC socket. 1 Mini USB connector.

Physical Dimensions:      100mm(L) x 82.5mm(W) x 29mm(H). Weight 0.5lb.

Range of Temperature:   Operating –20C~60C, Storage –30C~70C

This product offers an easy, at home no drill installation. The installation instructions manual is clear cut and easy to read. For additional information, please call us toll free 7-days a week at 1-866-309-1907 or 701-253-5906.