Home > Exterior Accessories > Tonneau Covers & Tops > Truck Bed Covers - Hard > Folding Truck Bed Covers - Hard > G2 BakFlip Hard Folding Truck Bed Covers
| G2 BakFlip Hard Folding Truck Bed Covers |  |
83 Reviews
|
|
||||||
|
|||||||||||||||||||||||||||||||||||||||||
Manufacturer Information View all Bak Industries products Manufacturer Documents Note: Adobe Reader is required to view PDF documents: Download Adobe Reader View available Products for this Product Line |
BakFlip G2 gives you access to virtually all of your truck bed without removing the cover! The BakFlip Panels flip open to reveal 1/4, 1/2 or all of you truck bed! The cover folds in one direction, and all panels lock into place against the back of the cab. When the BakFlip is folded up, it protects your rear truck window from your cargo. The BakFlip works with all makes of bed extenders. The Bakflip can be unlatched from the driver's or passenger's side. Generation 2 of the BakFlip tonneau bed covers feature newly designed rubber side seals that attach with tongue and groove, rather than tape. Reinforced panel frames that are 3 times as robust and have integrated drain channels under them, so there is no necessity for tape ANYWHERE. BakFlip covers are made of multiple panels. These panels automatically lock as you close them. The only way to release these hard folding panels is to pull on a latch cable secured under the cover. Doing so will allow you to fold each panel forward. When the panels are closed you cannot open the cover without access to the under-side of the BakFlip panels NO DRILLING - The BakFlip clamps on for an easy installation. The BakFlip installs in less than 45 minutes. Features self-tightening screws requiring only one wrench to install. Average cover weighs just 35 lbs.
- G2 Generation 2 Upgrades: Newly designed rubber side sides, reinforced panel frames, which are 3 times more robust that have integrated drain chanels under them as well as a new modular latching and locking system for optimum performance. Plus a newly designed locking arm that keeps the cover up and allows you to drive with cover up if needed.
- Hard Fold Up Design: Unique fold up design that is fast operating and a hard design.
- Extemely Low Profile: Bakflip sits INSIDE the truck bed rails for an EXTREME low profile look and fit.
- Full Truck Bed Access: Bakflip allows FULL ACCESS to all stake pockets and works with tie downs, bedcaps, bedliners, bedrails, lumber/ladder racks and bed extenders.
- Secure: The BakFlip cover easily locks offering outstanding security
- Versatile: Individual panels lock so that you can drive with them open or closed. Panels flip open in the same direction. Panels flip open to reveal 100% of the bed if desired.
- Fast Install & Quick Removal: BakFlip clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench INSIDE the truck bed rails for an EXTREME low profile look and fit and can be removed with in 60 seconds. The Flip Bak truck bed cover can be completely removed in 60 seconds. Locking knurled knobs have replaced simple nuts for easy tool-free on and off capabilities. The average cover weighs 35 lbs and can ship UPS.
- Strength & Rigidity: Made from dual laminated ABS panels with honeycomb core of excellent tensile strength and rigidity.
- UV Protected: The BakFlip is UV protected and will not fade, crack, warp, rust or corrode and the texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps. Absolute all season friendly – resistant to rain snow and the elements.
- Easy To Open: Panels flip open in the same direction to reveal 100% of the bed if desired, can withstand over 200 lbs of evenly distributed weight and locks for outstanding security
- Protection: The BakFlip cover protects your rear window when completely open – perfect for loading things like ATV’s, motorcycles or any other goods that might damage your window.
- Bed Accessory Friendly: BakFlip works with tie downs, bedcaps, bedliners, bedrails, lumber/ladder racks and bed extenders.
- Premium Finish: The texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps.
- Premium Fit: The Bak Flip cover is custom built for each application for a OEM like fit.
| Bak Flip Hard Folding Tonneau Covers | |
 |
Easy Installation Easy and Fast Clamp On Installation. The BakFlip cover clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench. It fits inside truck bed rails for an extremely low profile look and fit. Plus it can be removed with in 60 seconds. For additional information, please call 7-days a week 1-866-309-1907 or 701-253-5906. |
 |
Extemely Low Profile Extemely Low Profile: Bakflip sits INSIDE the truck bed rails for an EXTREME low profile look and fit. |
 |
Fast Clamp On Install Fast Clamp On Install: BakFlip clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench INSIDE the truck bed rails for an EXTREME low profile look and fit and can be removed with in 60 seconds |
 |
Full Truck Bed Access Full Truck Bed Access: Bakflip allows FULL ACCESS to all stake pockets and works with tie downs, bedcaps, bedliners, bedrails, lumber/ladder racks and bed extenders. Versatile: Individual panels lock so that you can drive with them open or closed. Panels flip open in the same direction. Panels flip open to reveal 100% of the bed if desired. |
 |
Half and Full Open The folding flip bak cover is very easy to open. Plus the invididual panels lock if needed so you can drive with the cover open in various positions. |
 |
Locking Arm After you fold the cover up, the locking arm keeps the bak flip cover up and allows you to drive with cover up if needed. |
 |
Low Profile Bakflip sits INSIDE the truck bed rails for an EXTREME low profile look and fit. |
 |
Premium Finish Premium Finish: The texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps. |
 |
Premium Fit Premium Fit: The Bak Flip cover is custom built for each application for a OEM like fit. |
 |
Protection The BakFlip cover protects your rear window when completely open. Perfect for loading things like ATV's, motorcycles or any other goods that might damage your window. |
 |
Quick Removal Quick Removal: The Flip Bak truck bed cover can be completely removed in 60 seconds. The average cover weighs 35 lbs and can ship UPS. |
 |
Secure Secure: The BakFlip cover easily locks offering outstanding security. Plus the individual panels lock so that you can drive with them open or closed. |
 |
Strength & Rigidity Strength & Rigidity: Made from dual laminated ABS panels with honeycomb core of excellent tensile strength and rigidity. UV Protected: The BakFlip is UV protected and will not fade, crack, warp, rust or corrode and the texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps. Absolute all season friendly ? resistant to rain snow and the elements. |
 |
BakFlip in Motion The panels Flip bak cover opens in the same direction to reveal the entire bed if desired. Very easy to use. Individual panels lock so that you can drive with them open or closed. Panels flip open in the same direction. Panels flip open to reveal 100% of the bed if desired. The when fully opened, the cover protects your rear window when completely open, perfect for loading things like ATVs, motorcycles or any other goods that might damage your window. |
FAQ Answers to BakFlip Truck Bed Covers
Security: BakFlip covers are made of multiple panels. These panels automatically lock as you close them. The only way to release these hard folding panels is to pull on a latch cable secured under the cover. Doing so will allow you to fold each panel forward. When the panels are closed you cannot open the cover without access to the under-side of the BakFlip panels. LOCKING YOUR TAILGATE will result in the cover being completely impregnable. If your truck does not have a locking tailgate then a tailgate lock such as a pop n lock can be simply added. The latches secure the cover on both sides and the panels can be operated from either the driver or passenger side of the truck bed. This means it is convenient to operate the cover from either side. All BakFlip’s have tamper-proof locking slam latches which offer maximum “out of sight – out of mind” security and peace of mind.
BakFlip Cover composition: BakFlip covers are made from heavy duty laminated sandwich panels. These panels are layered with ABS sheets on either side of a core made from EPS, essentially making the panels extremely strong, yet lightweight. The panels are also insulated making them noise resistant and allowing the truck bed to be cooler in the summer and warmer in the winter. The EPS (closed cell foam) core is completely weather resistant and cannot leak or allow any moisture to penetrate the panels. The ABS is UV protected and impervious to harmful sun rays, acids, fertilizers, chemicals, gasoline etc. All BakFlip covers have 4 panels which fold. Trucks that are less than 6 feet long have just 3 folding panels. All panels are framed with tough aluminum frames. These frames add to the tensile strength of the panels and allow over 200lbs of evenly distributed weight to be put on top of the cover. The panels are almost an inch thick. And sit completely flush with the top edge of your truck bed rails.
Hinges: BakFlip hinges are seamless. Unlike a piano hinge which can rust, leak, squeak, corrode and wear with time, the BakFlip seamless hinge system is made of a synthetic rubber. These specially formulated hinges act as the panel connectors, yet are flexible enough to act as hinges. This unique patented hinge system is completely silent and will not result in road chatter and is completely water proof.
Clamping system: BakFlip covers all install using a patented rail system. This rail system is clamped to the truck bed using specially designed clamps that grip behind the truck bed rails and sandwich the BakFlip rails in position. These clamps result in a clean, easy installation that requires no drilling. They clamps are easy to install and are serrated so that they grip the rails firmly and will not slip or loosen over time.
Rails: BakFlip rails are made from extremely durable Aluminum. They are powder coated black to match the vehicles accents and have a built in drainage gutter to collect any unwanted water. The rails help to funnel the water towards a drain valve located at the front ends of the rails. This patented rail system ensures that your cargo remains dry at all times. The panels also latch to these rails. The rails are lined with rubber gaskets so that they never scuff or rub the paint off your truck bed rails. The rails extend a mere 1/8th inch over the edge of the truck bed and 1 inch inwards of the truck rails. This means that they do not obstruct bed extenders and will work with most toolboxes as well.
Weights: The average cover weighs a mere 40 lbs. This includes the weight of the rails. The cover is designed to handle over 200 lbs of weight. The core of the panel gives it a lightweight feel, however don’t be fooled by this. Many aircrafts are made with this technology and are designed to be extremely strong, yet light. Because of the light weight nature of the cover, it is easy for people of all ages to operate. It’s also easy to ship or to remove and put back whenever you’d like.
All season friendly: Since the BakFlip is made of specially chosen weather resistant components and engineered with as few moving parts as possible, they are extremely water tight. While it is impossible for any cover to claim being 100% water proof, BakFlip covers can be relied upon to keep in excess of 98% of any water out of the truck bed. There are 2 drain hoses in the front of each rail that funnel water that’s collected in the rail system out of the bed. Since 99% of trucks are raised at the back and lower at the front end, these drain tubes are uniquely position at the far front corners of the bed to ensure that they work optimally. Snow and ice are no match for the BakFlip. Simply break any ice build up off the cover or sweep off snow. The BakFlip is designed to perform in extreme temperatures. Since the panels are impact resistant, they cannot dent, so even hail is not a problem. Specially engineered front and rear gaskets seal the cover at the cab end and tailgate end of the truck. This keeps moisture out and ensures tighter security on a whole.
Driving with panels open: You can absolutely drive with the BakFlip panels open. Specially incorporated D-rings and anchor points are an integral part of each BakFlip cover. This means that you can drive with one, two, three or four panels open for a wealth of loading options which are unavailable with any other truck bed cover. This feature is a favorite of any person who pulls a 5th wheel trailer or simply wants the convenience of NEVER having to remove their cover to haul a load of any size. Every BakFlip cover has 2 integrated gas struts. The struts assist in raising the panels to a vertical position behind your cab. Since the panels are stacked on top of each other before being raised vertically, they are at their heaviest which is why the struts are so convenient. They are rated at 70 lbs. They gas struts will keep the panels in this upright position without allowing them to flop down. IT IS HIGHLY RECCOMMENDED THAT YOU ONLY DRIVE WITH THE COVER IN THIS POSITION IF YOU MUST, EG: IF YOU HAVE SOMETHING SUPPORTING IT OPEN SUCH AS A DESK OR REFRIGERATOR.
BAKFLIP WORKS WITH OTHER ACCESSORIES: Huge amounts of research have gone into producing BakFlip covers to allow them to seamless co-exist and install with other commonly used accessories. These include bed caps, tailgate protectors, bed rails, carpet bedliners, spray on bedliners, drop in bedliners, floor mounted tool boxes, stake pocket mounted accessories such as tie downs and racks. Unfortunately BakFlip covers are not designed to work with old fashioned over the rail bedliners unless you modify the rails of the liner. The will however work with any bed rail (plastic) that comes on trucks directly from the manufacturer.
Maintenance: Since BakFlip covers are rugged and built to last, simple washing at the time you wash your truck is sufficient to see your cover last for years. It is fine to spray or clean the cover with agents such as 303 or Armorall.
Security: BakFlip covers are made of multiple panels. These panels automatically lock as you close them. The only way to release these hard folding panels is to pull on a latch cable secured under the cover. Doing so will allow you to fold each panel forward. When the panels are closed you cannot open the cover without access to the under-side of the BakFlip panels. LOCKING YOUR TAILGATE will result in the cover being completely impregnable. If your truck does not have a locking tailgate then a tailgate lock such as a pop n lock can be simply added. The latches secure the cover on both sides and the panels can be operated from either the driver or passenger side of the truck bed. This means it is convenient to operate the cover from either side. All BakFlip’s have tamper-proof locking slam latches which offer maximum “out of sight – out of mind” security and peace of mind.
BakFlip Cover composition: BakFlip covers are made from heavy duty laminated sandwich panels. These panels are layered with ABS sheets on either side of a core made from EPS, essentially making the panels extremely strong, yet lightweight. The panels are also insulated making them noise resistant and allowing the truck bed to be cooler in the summer and warmer in the winter. The EPS (closed cell foam) core is completely weather resistant and cannot leak or allow any moisture to penetrate the panels. The ABS is UV protected and impervious to harmful sun rays, acids, fertilizers, chemicals, gasoline etc. All BakFlip covers have 4 panels which fold. Trucks that are less than 6 feet long have just 3 folding panels. All panels are framed with tough aluminum frames. These frames add to the tensile strength of the panels and allow over 200lbs of evenly distributed weight to be put on top of the cover. The panels are almost an inch thick. And sit completely flush with the top edge of your truck bed rails.
Hinges: BakFlip hinges are seamless. Unlike a piano hinge which can rust, leak, squeak, corrode and wear with time, the BakFlip seamless hinge system is made of a synthetic rubber. These specially formulated hinges act as the panel connectors, yet are flexible enough to act as hinges. This unique patented hinge system is completely silent and will not result in road chatter and is completely water proof.
Clamping system: BakFlip covers all install using a patented rail system. This rail system is clamped to the truck bed using specially designed clamps that grip behind the truck bed rails and sandwich the BakFlip rails in position. These clamps result in a clean, easy installation that requires no drilling. They clamps are easy to install and are serrated so that they grip the rails firmly and will not slip or loosen over time.
Rails: BakFlip rails are made from extremely durable Aluminum. They are powder coated black to match the vehicles accents and have a built in drainage gutter to collect any unwanted water. The rails help to funnel the water towards a drain valve located at the front ends of the rails. This patented rail system ensures that your cargo remains dry at all times. The panels also latch to these rails. The rails are lined with rubber gaskets so that they never scuff or rub the paint off your truck bed rails. The rails extend a mere 1/8th inch over the edge of the truck bed and 1 inch inwards of the truck rails. This means that they do not obstruct bed extenders and will work with most toolboxes as well.
Weights: The average cover weighs a mere 40 lbs. This includes the weight of the rails. The cover is designed to handle over 200 lbs of weight. The core of the panel gives it a lightweight feel, however don’t be fooled by this. Many aircrafts are made with this technology and are designed to be extremely strong, yet light. Because of the light weight nature of the cover, it is easy for people of all ages to operate. It’s also easy to ship or to remove and put back whenever you’d like.
All season friendly: Since the BakFlip is made of specially chosen weather resistant components and engineered with as few moving parts as possible, they are extremely water tight. While it is impossible for any cover to claim being 100% water proof, BakFlip covers can be relied upon to keep in excess of 98% of any water out of the truck bed. There are 2 drain hoses in the front of each rail that funnel water that’s collected in the rail system out of the bed. Since 99% of trucks are raised at the back and lower at the front end, these drain tubes are uniquely position at the far front corners of the bed to ensure that they work optimally. Snow and ice are no match for the BakFlip. Simply break any ice build up off the cover or sweep off snow. The BakFlip is designed to perform in extreme temperatures. Since the panels are impact resistant, they cannot dent, so even hail is not a problem. Specially engineered front and rear gaskets seal the cover at the cab end and tailgate end of the truck. This keeps moisture out and ensures tighter security on a whole.
Driving with panels open: You can absolutely drive with the BakFlip panels open. Specially incorporated D-rings and anchor points are an integral part of each BakFlip cover. This means that you can drive with one, two, three or four panels open for a wealth of loading options which are unavailable with any other truck bed cover. This feature is a favorite of any person who pulls a 5th wheel trailer or simply wants the convenience of NEVER having to remove their cover to haul a load of any size. Every BakFlip cover has 2 integrated gas struts. The struts assist in raising the panels to a vertical position behind your cab. Since the panels are stacked on top of each other before being raised vertically, they are at their heaviest which is why the struts are so convenient. They are rated at 70 lbs. They gas struts will keep the panels in this upright position without allowing them to flop down. IT IS HIGHLY RECCOMMENDED THAT YOU ONLY DRIVE WITH THE COVER IN THIS POSITION IF YOU MUST, EG: IF YOU HAVE SOMETHING SUPPORTING IT OPEN SUCH AS A DESK OR REFRIGERATOR.
BAKFLIP WORKS WITH OTHER ACCESSORIES: Huge amounts of research have gone into producing BakFlip covers to allow them to seamless co-exist and install with other commonly used accessories. These include bed caps, tailgate protectors, bed rails, carpet bedliners, spray on bedliners, drop in bedliners, floor mounted tool boxes, stake pocket mounted accessories such as tie downs and racks. Unfortunately BakFlip covers are not designed to work with old fashioned over the rail bedliners unless you modify the rails of the liner. The will however work with any bed rail (plastic) that comes on trucks directly from the manufacturer.
Maintenance: Since BakFlip covers are rugged and built to last, simple washing at the time you wash your truck is sufficient to see your cover last for years. It is fine to spray or clean the cover with agents such as 303 or Armorall.
Easy and Fast Clamp On Installation. The BakFlip cover clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench. It fits inside truck bed rails for an extremely low profile look and fit. Plus it can be removed with in 60 seconds. Please See the video tab to view an installation or the attached installation instructions below. For additional information, please call 7-days a week 1-866-309-1907 or 701-253-5906.
Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
|
Easy Installation Easy and Fast Clamp On Installation. The BakFlip cover clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench. It fits inside truck bed rails for an extremely low profile look and fit. Plus it can be removed with in 60 seconds. For additional information, please call 7-days a week 1-866-309-1907 or 701-253-5906. |
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
 |
How It Works The hard panels easily flip open towards the cab of the pickup. Plus the cover can be locked in various positions or flipped up all the way against the cab of the pickup. To close, just reverse the process. |
|
Just Fold It Open The folding flip bak cover is very easy to open. Plus the invididual panels lock if needed so you can drive with the cover open in various positions. |
The BAKFlip Tonneau Cover has a warranty of One Year against any defects in material or workmanship. This warranty is offered directly through the manufacturing facility at BAK Industries. BAK takes the quality of our product very seriously. That is why the highest quality of material available is utilized to go into these covers. Unlike most lifetime warranties that have loopholes big enough to drive a truck through, our comprehensive 1 year warranty covers virtually all components! And we don't hide behind any fine print! NOTE: WARRANTY CARD MUST BE COMPLETED AND MAILED WITHIN 14 DAYS OF RECEIPT OF YOUR COVER TO ACTIVATE YOUR WARRANTY
