 |
|
 |
G2 BakFlip Hard Folding Truck Bed Covers |
|
|
 $884.86 to $1136.62
 $619.40 to $795.64
 $265.46 to $340.98
 |
|
|
Manufacturer InformationBAK INDUSTRIES has grown with our loyal support and commitment to our customers around the world. Bak manufacturers the RollBak hard retracting truck bed cover, the BakFlip G2 tonneau cover, the RidgeBak hard cover and the TiltBak hinging bed covers, ProCaps Abs bed rails caps and tailgate guards, and Bak molded running boards.
View all Bak Industries products
Manufacturer Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
View available Products for this Product Line
|
BakFlip G2 gives you access to virtually all of your truck bed without removing the cover! The BakFlip Panels flip open to reveal 1/4, 1/2 or all of you truck bed!
The cover folds in one direction, and all panels lock into place against the back of the cab. When the BakFlip is folded up, it protects your rear truck window from your cargo.
The BakFlip works with all makes of bed extenders. The Bakflip can be unlatched from the driver's or passenger's side.
Generation 2 of the BakFlip tonneau bed covers feature newly designed rubber side seals that attach with tongue and groove, rather than tape. Reinforced panel frames that are 3 times as robust and have integrated drain channels under them, so there is no necessity for tape ANYWHERE. BakFlip covers are made of multiple panels. These panels automatically lock as you close them. The only way to release these hard folding panels is to pull on a latch cable secured under the cover. Doing so will allow you to fold each panel forward. When the panels are closed you cannot open the cover without access to the under-side of the BakFlip panels
NO DRILLING - The BakFlip clamps on for an easy installation.
The BakFlip installs in less than 45 minutes.
Features self-tightening screws requiring only one wrench to install.
Average cover weighs just 35 lbs.
- G2 Generation 2 Upgrades: Newly designed rubber side sides, reinforced panel frames, which are 3 times more robust that have integrated drain chanels under them as well as a new modular latching and locking system for optimum performance. Plus a newly designed locking arm that keeps the cover up and allows you to drive with cover up if needed.
- Full Truck Bed Access: Bakflip allows FULL ACCESS to all stake pockets and works with tie downs, bedcaps, bedliners, bedrails, lumber/ladder racks and bed extenders.
- Secure: The BakFlip cover easily locks offering outstanding security
- Versatile: Individual panels lock so that you can drive with them open or closed. Panels flip open in the same direction. Panels flip open to reveal 100% of the bed if desired.
- Fast Install & Quick Removal: BakFlip clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench INSIDE the truck bed rails for an EXTREME low profile look and fit and can be removed with in 60 seconds. The Flip Bak truck bed cover can be completely removed in 60 seconds. Locking knurled knobs have replaced simple nuts for easy tool-free on and off capabilities. The average cover weighs 35 lbs and can ship UPS.
- Strength & Rigidity: Made from dual laminated ABS panels with honeycomb core of excellent tensile strength and rigidity.
- UV Protected: The BakFlip is UV protected and will not fade, crack, warp, rust or corrode and the texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps. Absolute all season friendly – resistant to rain snow and the elements.
- Easy To Open: Panels flip open in the same direction to reveal 100% of the bed if desired, can withstand over 200 lbs of evenly distributed weight and locks for outstanding security
- Protection: The BakFlip cover protects your rear window when completely open – perfect for loading things like ATV’s, motorcycles or any other goods that might damage your window.
- Accessory Friendly: BakFlip works with tie downs, bedcaps, bedliners, bedrails, lumber/ladder racks and bed extenders.
- Extemely Low Profile: Bakflip sits INSIDE the truck bed rails for an EXTREME low profile look and fit.
- Premium Finish: The texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps.
- Premium Fit: The Bak Flip cover is custom built for each application for a OEM like fit.
| Bak Flip Hard Folding Tonneau Covers |
 |
Easy Installation
Easy and Fast Clamp On Installation. The BakFlip cover clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench. It fits inside truck bed rails for an extremely low profile look and fit. Plus it can be removed with in 60 seconds. For additional information, please call 7-days a week 1-866-309-1907 or 701-253-5906. |
 |
Extemely Low Profile
Extemely Low Profile: Bakflip sits INSIDE the truck bed rails for an EXTREME low profile look and fit. |
 |
Fast Clamp On Install
Fast Clamp On Install: BakFlip clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench INSIDE the truck bed rails for an EXTREME low profile look and fit and can be removed with in 60 seconds |
 |
Full Truck Bed Access
Full Truck Bed Access: Bakflip allows FULL ACCESS to all stake pockets and works with tie downs, bedcaps, bedliners, bedrails, lumber/ladder racks and bed extenders. Versatile: Individual panels lock so that you can drive with them open or closed. Panels flip open in the same direction. Panels flip open to reveal 100% of the bed if desired. |
 |
Half and Full Open
The folding flip bak cover is very easy to open. Plus the invididual panels lock if needed so you can drive with the cover open in various positions. |
 |
Locking Arm
After you fold the cover up, the locking arm keeps the bak flip cover up and allows you to drive with cover up if needed. |
 |
Low Profile
Bakflip sits INSIDE the truck bed rails for an EXTREME low profile look and fit. |
 |
Premium Finish
Premium Finish: The texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps. |
 |
Premium Fit
Premium Fit: The Bak Flip cover is custom built for each application for a OEM like fit. |
 |
Protection
The BakFlip cover protects your rear window when completely open. Perfect for loading things like ATV's, motorcycles or any other goods that might damage your window. |
 |
Quick Removal
Quick Removal: The Flip Bak truck bed cover can be completely removed in 60 seconds. The average cover weighs 35 lbs and can ship UPS. |
 |
Secure
Secure: The BakFlip cover easily locks offering outstanding security. Plus the individual panels lock so that you can drive with them open or closed. |
 |
Strength & Rigidity
Strength & Rigidity: Made from dual laminated ABS panels with honeycomb core of excellent tensile strength and rigidity. UV Protected: The BakFlip is UV protected and will not fade, crack, warp, rust or corrode and the texture of the product perfectly matches door handles, bumper trim, side view mirrors and bedcaps. Absolute all season friendly ? resistant to rain snow and the elements. |
 |
BakFlip in Motion
The panels Flip bak cover opens in the same direction to reveal the entire bed if desired. Very easy to use. Individual panels lock so that you can drive with them open or closed. Panels flip open in the same direction. Panels flip open to reveal 100% of the bed if desired. The when fully opened, the cover protects your rear window when completely open, perfect for loading things like ATVs, motorcycles or any other goods that might damage your window. |
FAQ Answers to BakFlip Truck Bed Covers
Security: BakFlip covers are made of multiple panels. These panels automatically lock as you close them. The only way to release these hard folding panels is to pull on a latch cable secured under the cover. Doing so will allow you to fold each panel forward. When the panels are closed you cannot open the cover without access to the under-side of the BakFlip panels. LOCKING YOUR TAILGATE will result in the cover being completely impregnable. If your truck does not have a locking tailgate then a tailgate lock such as a pop n lock can be simply added. The latches secure the cover on both sides and the panels can be operated from either the driver or passenger side of the truck bed. This means it is convenient to operate the cover from either side. All BakFlip’s have tamper-proof locking slam latches which offer maximum “out of sight – out of mind” security and peace of mind.
BakFlip Cover composition: BakFlip covers are made from heavy duty laminated sandwich panels. These panels are layered with ABS sheets on either side of a core made from EPS, essentially making the panels extremely strong, yet lightweight. The panels are also insulated making them noise resistant and allowing the truck bed to be cooler in the summer and warmer in the winter. The EPS (closed cell foam) core is completely weather resistant and cannot leak or allow any moisture to penetrate the panels. The ABS is UV protected and impervious to harmful sun rays, acids, fertilizers, chemicals, gasoline etc. All BakFlip covers have 4 panels which fold. Trucks that are less than 6 feet long have just 3 folding panels. All panels are framed with tough aluminum frames. These frames add to the tensile strength of the panels and allow over 200lbs of evenly distributed weight to be put on top of the cover. The panels are almost an inch thick. And sit completely flush with the top edge of your truck bed rails.
Hinges: BakFlip hinges are seamless. Unlike a piano hinge which can rust, leak, squeak, corrode and wear with time, the BakFlip seamless hinge system is made of a synthetic rubber. These specially formulated hinges act as the panel connectors, yet are flexible enough to act as hinges. This unique patented hinge system is completely silent and will not result in road chatter and is completely water proof.
Clamping system: BakFlip covers all install using a patented rail system. This rail system is clamped to the truck bed using specially designed clamps that grip behind the truck bed rails and sandwich the BakFlip rails in position. These clamps result in a clean, easy installation that requires no drilling. They clamps are easy to install and are serrated so that they grip the rails firmly and will not slip or loosen over time.
Rails: BakFlip rails are made from extremely durable Aluminum. They are powder coated black to match the vehicles accents and have a built in drainage gutter to collect any unwanted water. The rails help to funnel the water towards a drain valve located at the front ends of the rails. This patented rail system ensures that your cargo remains dry at all times. The panels also latch to these rails. The rails are lined with rubber gaskets so that they never scuff or rub the paint off your truck bed rails. The rails extend a mere 1/8th inch over the edge of the truck bed and 1 inch inwards of the truck rails. This means that they do not obstruct bed extenders and will work with most toolboxes as well.
Weights: The average cover weighs a mere 40 lbs. This includes the weight of the rails. The cover is designed to handle over 200 lbs of weight. The core of the panel gives it a lightweight feel, however don’t be fooled by this. Many aircrafts are made with this technology and are designed to be extremely strong, yet light. Because of the light weight nature of the cover, it is easy for people of all ages to operate. It’s also easy to ship or to remove and put back whenever you’d like.
All season friendly: Since the BakFlip is made of specially chosen weather resistant components and engineered with as few moving parts as possible, they are extremely water tight. While it is impossible for any cover to claim being 100% water proof, BakFlip covers can be relied upon to keep in excess of 98% of any water out of the truck bed. There are 2 drain hoses in the front of each rail that funnel water that’s collected in the rail system out of the bed. Since 99% of trucks are raised at the back and lower at the front end, these drain tubes are uniquely position at the far front corners of the bed to ensure that they work optimally. Snow and ice are no match for the BakFlip. Simply break any ice build up off the cover or sweep off snow. The BakFlip is designed to perform in extreme temperatures. Since the panels are impact resistant, they cannot dent, so even hail is not a problem. Specially engineered front and rear gaskets seal the cover at the cab end and tailgate end of the truck. This keeps moisture out and ensures tighter security on a whole.
Driving with panels open: You can absolutely drive with the BakFlip panels open. Specially incorporated D-rings and anchor points are an integral part of each BakFlip cover. This means that you can drive with one, two, three or four panels open for a wealth of loading options which are unavailable with any other truck bed cover. This feature is a favorite of any person who pulls a 5th wheel trailer or simply wants the convenience of NEVER having to remove their cover to haul a load of any size. Every BakFlip cover has 2 integrated gas struts. The struts assist in raising the panels to a vertical position behind your cab. Since the panels are stacked on top of each other before being raised vertically, they are at their heaviest which is why the struts are so convenient. They are rated at 70 lbs. They gas struts will keep the panels in this upright position without allowing them to flop down. IT IS HIGHLY RECCOMMENDED THAT YOU ONLY DRIVE WITH THE COVER IN THIS POSITION IF YOU MUST, EG: IF YOU HAVE SOMETHING SUPPORTING IT OPEN SUCH AS A DESK OR REFRIGERATOR.
BAKFLIP WORKS WITH OTHER ACCESSORIES: Huge amounts of research have gone into producing BakFlip covers to allow them to seamless co-exist and install with other commonly used accessories. These include bed caps, tailgate protectors, bed rails, carpet bedliners, spray on bedliners, drop in bedliners, floor mounted tool boxes, stake pocket mounted accessories such as tie downs and racks. Unfortunately BakFlip covers are not designed to work with old fashioned over the rail bedliners unless you modify the rails of the liner. The will however work with any bed rail (plastic) that comes on trucks directly from the manufacturer.
Maintenance: Since BakFlip covers are rugged and built to last, simple washing at the time you wash your truck is sufficient to see your cover last for years. It is fine to spray or clean the cover with agents such as 303 or Armorall. Easy and Fast Clamp On Installation. The BakFlip cover clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench. It fits inside truck bed rails for an extremely low profile look and fit. Plus it can be removed with in 60 seconds. Please See the video tab to view an installation or the attached installation instructions below. For additional information, please call 7-days a week 1-866-309-1907 or 701-253-5906.
|
Easy Installation
Easy and Fast Clamp On Installation. The BakFlip cover clamps onto your truck bed with no drilling and installs in approximately 10 minutes with just one wrench. It fits inside truck bed rails for an extremely low profile look and fit. Plus it can be removed with in 60 seconds. For additional information, please call 7-days a week 1-866-309-1907 or 701-253-5906.
|
Associated DocumentsNote: Adobe Reader is required to view PDF documents: Download Adobe Reader
 |
How It Works
The hard panels easily flip open towards the cab of the pickup. Plus the cover can be locked in various positions or flipped up all the way against the cab of the pickup. To close, just reverse the process.
|
|
Just Fold It Open
The folding flip bak cover is very easy to open. Plus the invididual panels lock if needed so you can drive with the cover open in various positions.
|
The BAKFlip Tonneau Cover has a warranty of One Year against any defects in material or workmanship. This warranty is offered directly through the manufacturing facility at BAK Industries. BAK takes the quality of our product very seriously. That is why the highest quality of material available is utilized to go into these covers. Unlike most lifetime warranties that have loopholes big enough to drive a truck through, our comprehensive 1 year warranty covers virtually all components! And we don't hide behind any fine print! NOTE: WARRANTY CARD MUST BE COMPLETED AND MAILED WITHIN 14 DAYS OF RECEIPT OF YOUR COVER TO ACTIVATE YOUR WARRANTY
| Customer Rating |
Product |
  |
BK-26409T - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Kerry M. (Allen, TX) on 05/2008 The product was exactly as advertised. Easy installation, although it did take me a few days to install the deck rail extenders because I painted them black. Everything fits perfectly with no issues. Previously it was mentioned that they only sent 8 brackets, but mine came with 10 so I had exactly what I needed to push down the deck rails. The only reason I'm not giving it the full 5 stars, is because I'm a little concerned about the longevity of all the rubber on this device as I open and close the top repeatedly. But for now, everything appears to be good.
|
|
BK-26505 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Michael G L. (Nashville, TN) on 05/2008 The cover was well packed, and delivered on time. The installation would have taken only a few minutes, except that the factory installed bedliner made the interior of the bed 1/2" short for the rails. (I had to cut 1/2" off the rear end of both rails. I also noticed that the ribbed gasket that faces upward on the passenger side rail was torn. (Not the result of shipping). I contacted BAK about both issues, but have not heard from them.
The buying experience with RealTruck was first class.
|
|
BK-26409T - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Michell C. (Belle Chasse, LA) on 05/2008 I am so happy with the cover. I gave it to my husband as an anniversary gift and he was really excited. He installed it in no time at all.
|
|
BK-26409T - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: James L. (Knoxville, TN) on 04/2008 My initial thought after seeing the product is that it is very nicely constructed for the top that this is. Some people are disappointed in this top becasue it is not rugged enough in their opinion. It is not meant to carry large amount of weight and has a 200lb load limit. I love the ability to have a securied bed and also be able to fold the top out of the way when needed. Please ask me for another survey down the road.
|
|
BK-26101 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: William A S. (Roanoke, VA) on 04/2008 Excellent quality, easy to install, looks AMAZING. A great product and worth every penny.
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Antonio G. (Bloomfield, NJ) on 04/2008 Was not crazy about how water drains off? But other than that I think it is great.
|
|
BK-26410 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Ben M. (Aurora, IL) on 04/2008 No problem so far, however if you have a Tundra you will have to modify the drain hose. The hose is to large to fit in the precut holes in the bed.
|
|
BK-26204 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Charles L R. (Visalia, CA) on 04/2008 My experience could not have been better. The sales person was knowledgeable of the item I was interested in purchasing. Made the purchase process painless and quickly. He also provided me with e-mails and tracking information on the scheduled shipping date and updates as the delivery was in process. I will in the future look to RealTruck first for any additional products I may want to add to, enhance, or make repairs to my truck.
|
|
BK-26100 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Thomas J M. (Huntley, IL) on 04/2008 very happy, the back flip is just what we wanted, it is a great fit on our 07 silverado. the cover arrived in great shape in lest then a week.
thankyo
|
|
BK-26409T - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Kevin B. (Milton, FL) on 04/2008 The Bak Flip Hard Folding Tonneau Cover is everything I wanted it to be. Easy install, good quality, and RealTruck Customer Service is great. I'm glad I didn't go with a one-piece or soft cover. Hauling larger objects is easy. Just fold it up and go. Looks great too. I love this cover.
|
|
BK-26307 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Mark P W. (Tewksbury, MA) on 03/2008 Over all construction of product is great. Easy to install, directions could be a little more descriptive. The only thing I do not like about the BackFlip G2 is that when you want to expose the whole truck bed and you fold it foward, It rests against the back of your cab. I know they give you soft foam rubber bumpers for you to install on the cover and they are what contacts the cab, but over time they will mark the cab and come off. Product support, questions and ordering at Real Truck was excellent.
|
|
BK-26101 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Dennis C. (Spring Valley Lake, CA) on 03/2008 Easy to install. I had to do a little custom fitting due to a factory bedliner. Well satisfied with the cover. It is well built and serves it's purpose well.
|
|
BK-26203 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Keith C. (O' Fallon, MO) on 03/2008 Love it! Looks good, cant hardly tell it's there. Latches work great, when it is latched down, you are not getting in.
|
|
BK-26101 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Jerry S. (Torrington, WY) on 03/2008 wish product would of came with snap in stake bed covers,other than that i am very pleased with my cover.
|
|
BK-26410T - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Jeff M. (Mesa, AZ) on 03/2008 Installation instructions were a bit vague, but with the help of the online truck forums, installation wasn't too bad. Fit is good, but some of the rubber seals on the sides where the folds (hinges) are came a bit chewed up (from shipping?) but not bad enough to make me want a replacement.
|
|
BK-26203 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Patrick M. (Killeen, TX) on 03/2008 I love this thing with a tail gate lock this semi soild cover keeps honest men honest more importantly if I find that great deal on a new lazy boy while im out shopping it takes about 5 secounds to open thsi thing up to get almost ever inch of use of my bed. It took less than 30 minutes to install on own with simple hand tools.
|
|
BK-26405 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Hasan S. (Columbia, SC) on 03/2008 Fits well but not so good near the tailgate. Some water can get in but with the bed rug it stays right at the end of the bed near the gate.
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Roger T. (richland, WA) on 03/2008 I am overall very happy with my Bakflip cover, there have been two cases where the adhesive tape failed and rework was required. Those are the only issues I have had to date.
|
|
BK-26303 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: James G. (Goose Creek, SC) on 03/2008 A great pruduct. Fit is good and it keeps my cargo area locked and weatherproof. I think the anchor bolts at the cab end need to be a little longer when a factory bedliner is used.
|
|
BK-26100 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Christopher K. (Greenwell Springs, LA) on 03/2008 Had to send the original cover back to the manufacturer. Their customer service was awsome and they sent me a newly designed cover.
|
|
BK-26307 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Robert P. (Tomball, TX) on 03/2008 I RELLY ENJOYED THE EASY INSTALLATION. THE CAPABILITY TO RUN DOWN THE ROAD WITH THE COVER COMPLETELY OPEN WAS VERY USEFUL. I HAVE SINCE BOUGHT A NEW TRUCK AND WILL BE GETTING ANOTHER BAKFLIP FOR THE NEW TRUCK.
|
|
BK-26101 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Robert W R. (Dubuque, IA) on 03/2008 it arrived in good shape and on time as stated. it was easy to
install with one wrench in about one hour. looks and fits great.
|
|
BK-26405 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Ricardo G. (Miami) on 03/2008 The only negative comment is that the 2 rubber seals that go along the border of the liner are not glued properly and tend to come off.
|
|
BK-26505 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: James C. (Bushkill, PA) on 03/2008 The Bak-flip cover is pretty good. It is not waterproof but it does keep thing somewhat dry. The quality could be improved. I under stand the newer models have some upgrades and improvements. So make sure when you buy one it is the newer model not the first gen.
|
|
BK-26102 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Roger F. (Brecksville, OH) on 03/2008 Very dissatisfied with the BakFlip tonneau cover. It leaks water badly between the plastic panels and the aluminum panel frames. It also sags from it's own weight causing water to pool in the middle of the cover, compounding the leaking issue. The weather stripping has beem falling off (reglued several times) and already replaced all the foam seals on the underside. This product is absolute junk and it's only been on the truck for a year. To add injury to the insult, I cut my hand on one of the pop-rivit heads a couple of months ago. The only thing positive is it does lock securely. If it weren't for the security, I would rate this as 0 Stars.
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Laura G. (East Setauket, NY) on 03/2008 the cover is just what i needed. thanks josh for suggesting it.
|
|
BK-26507 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Lance M. (Piedmont, AL) on 03/2008
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Joseph G. (Corfu) on 03/2008 The cover was a 5 in installation as it went easy. There are some areas I had to use some extra sealant to try to improve the water-tightness, and even with that it still gets some water into the bed. I have had the cover on for seven months and the side rubber covers have both come off, but that did not impact the water infiltration that much. Also, the cables to unlatch the sections have a channel covering them and two have fallen off, again, this does not affect the overall use that much. Even with these issues, the three out of five is because the alternatives I looked into were all worse solutions. Knowing the limitations of the truck bed in advance, I am very satisfied with this product and would buy it again. My suggestion would be they improve the adhesive used to attach the parts (especially the rubber).
|
|
BK-26100 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Mark W. (Greenbay, WI) on 03/2008 I really like that it is a hard cover that folds up. took about 30 minutes to install with the help of a friend.
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Calvin B. (Birmingham, AL) on 03/2008 The Bakflip that I ordered is perfect!!
The instructions were easy to follow and it fit my Ridgline!
I will always chck RealTruck first for my truck parts and accessories!!
|
|
BK-26109 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Steven C. (Coeur d'alene, ID) on 03/2008 I love my bakflip hard folding tonneau cover. It fits perfectly and I like the way it is recessed into the bed. It took four mechanics in our shop an hour to install it (they are all perfectionists) but any one of them could have done it in 20 minutes. I am very pleased with the product and the service I got from Realtruck.
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Ross M. (Bartlesville, OK) on 03/2008 Installation was quick and easy. Access to the truck bed works well with the folding cover. The bed seals, which are glued to the top of the cover and run the length of the bed, have come off due to the adhesive failing in the heat of summer. I received no response from the factory when I tried to get new seals under warranty. Without the seals the cover leaks water into the bed.
|
|
BK-26102 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Gary R. (Spencerport, NY) on 03/2008 Great cover for pickup truck bed. Keeps the bed dry and free of snow. Easy to put together and install
|
|
BK-26601 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: MICHAEL W. (MARKHAM, IL) on 03/2008 I love the cover, but I never received my free T-shirt,spoke with someone at Customer Service and they blew me off. 5 star for product and -0 for Customer Service.
|
|
BK-26409T - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Roger E. (Houston, TX) on 03/2008 Armed with tons of research on Tonneau covers I searched the net for the best supplier and found RealTruck to be more than they claim to be. They have several key factors that places them a step above their competition. Over the years I have owned several fiberglass and a couple of vinyl bed covers. Each with their own issues! The Fold-A-Cover is without a doubt the Best Cover I have every owned! I installed it by myself in under 30 minutes and with the tailgate seal it is leak proof... Four of my friends purchased a BakFlip for their truck after seeing mine. How can you go wrong when you purchase a great product for the right price from a sales staff that knows the products and that truely wants to help the customer have an enjoyable and fullfilling buying experience? You can not beat it. Thanks RealTruck, Roger Edwards, Houston, TX
|
|
BK-26305 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Jean B. (coloma, WI) on 03/2008 THE BAK FLIP TONNEAU COVER MADE MY TRUCK LOOK WORTH MORE THAN IT IS. EVERYONE LOVES IT. I CAN PUT THINGS IN NY TRUCK NOW AND IT STAYS DRY. ALSO I HAVE THE CONVENIENCE OF OPENING UP ONLY THE SECTION I WANT TO GET MY THINGS OUT OF. THANKS FOR MAKING SUCH A NICE PRODUCT.
|
|
BK-26410 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Paul R. (Granite Bay, CA) on 03/2008 This is a great cover. Dry, handsome, easy to use. It is the real deal.
|
|
BK-26405 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Sean L. (Blaine, WA) on 03/2008 After much searching for the perfect tonneau cover, I found it. I don't care if I get the odd drip of water, I have a truck and want to be able to use the box full width, and full height (tall objects), and full depth. I also wanted the security of knowing it's closed and not easily accessed by a crook. This fit the bill perfectly, and looks great too. Had numerous people comment already and have a feeling a few might end up ordering them.
|
|
BK-26109 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: William D B. (Ocean Springs, MS) on 03/2008 It was everything as advertised. Easy to install and easy to use. The folding feature is a lifesaver when you are away from home and needing to carry a large load. You just fold the cover up against the cab out of the way.
Would definitely recommend as a truck bed cover.
|
|
BK-26405 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: joseph K. (grafton, WI) on 03/2008 Great product
|
|
BK-26309 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Matthew W. (Swansea, SC) on 03/2008 it leaks
|
|
BK-26309 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: David M L. (Fairfax Station, VA) on 03/2008 I researched these products very carefully and was convinced that this was the best choice for my new 2007 F-150 4x4. The BakFlip was made and shipped promptly. The directions could be a bit more explicit but are OK. The biggest surprise was the BakFlip itself. As a engineer, I am very impressed with the design, its sturdiness, and its ease of operation. It is perfect...exactly what I wanted. I am so glad I did not get one of the roll-ups or a flimsy competitor product. I am very satisfied with the BakFlip. I haven't seen anything that can touch it!
|
|
BK-26309 - BakFlip G2 Hard Folding Truck Bed Tonneau Cover
Posted By: Alan M. (Wonder Lake, IL) on 03/2008 I have had this top for less than a year.. I am mostly pleased with the exception that the rubber seals are almost all in need of being reglued.. I have had to reglue some of them shortly after installation and now after the tough winter more of them are loose.. Otherwise the top is everything I hoped for and the quality and price are great.
|
|
