Home > Performance > Performance Chips & Programmers > Diagnostic Tools & Gauges > BD Diesel Performance X-Monitor Digital Guages
| BD Diesel Performance X-Monitor Digital Guages |  |
|
|
||||||
|
|||||||||||||||||||||||||
Manufacturer Information View all BD Diesel products Manufacturer Documents Note: Adobe Reader is required to view PDF documents: Download Adobe Reader View available Products for this Product Line |
Peak levels are saved in memory and can be viewed after a run. The exhaust temperatures are monitored with a Pyrometer probe inserted in the exhaust flow. The probe can be mounted before of after the turbocharger. If mounted after the turbo the temperatures will vary from 300o F to 1000o F. If mounted before the turbo temperatures of 300 F to 1200 F will be normal working levels. Select the temperatures that should not be exceeded and the numbers will flash when it is attained. It is hard to have too much turbocharger boost pressure but if you have too little under a hard pull the result can be high operating temperatures. Transmission oil temperatures will reflect how hard you are working the transmission. The oil begins to break down quickly once it reaches 270o F. Higher temperatures cause transmission life to shorten, set the limit at the 250o F and increase the operating life. We can also monitor the fuel transfer pump pressure on the ISB electronic engines. Traditional round Analog gauges and mounts are also available, please scroll the page down to view them. Stay on top of what is happening in your engine with the proper gauges from BD! A Pyrometer to monitor exhaust temperatures. The Turbo Boost gauge keeps track of a turbo pressures. A Back Pressure gauge monitors exhaust brake performance. An Oil Temperature gauge will insure that you are aware of how well your transmission is functioning. A variety of mounts are available.
- Monitor Engine Parameters: Monitors the Transmission Temperatures, Exhaust Temperatures, and the Turbo Boast.
- Set Peak levels: The peak operating levels can be set to flash warning for safety. And are saved in memory and can be viewed after a run.
- Operating Pressures and Temperatures: Operating pressures and temperatures can easily be read with a simple glance.
- Exhaust Temperatures: The exhaust temperatures are monitored with a Pyrometer probe inserted in the exhaust flow.
- Probe Mounting: The probe can be mounted before of after the turbocharger. If mounted after the turbo the temperatures will vary from 300o F to 1000o F. If mounted before the turbo temperatures of 300½ F to 1200o F
- Safety Temperatures Settings: Select the temperatures that should not be exceeded and the numbers will flash when it is attained.
- Adjustable Display Brightness: The display brightness can be set for driver comfort.
- Lo-Profile Mount: The Low mount does not restrict Vision.
| The Low mount dose not restrict Vision | |
 |
X-Monitor Monitors the Transmission Temperatures, Exhaust Temperatures, and the Turbo Boast. |
 |
Safety Temperatures Settings: Select the temperatures that should not be exceeded and the numbers will flash when it is attained. |
When do I need gauges?
| Gauges are highly recommended on all applications as the factory instrumentation is limited. Any heavy-duty tow/haul usage should have gauges installed to monitor temperatures and pressures. The X-Monitor is an easy way to monitor exhaust gas temperatures (EGTs), turbo boost pressure and automatic transmission fluid temperatures, which are the most common values to monitor. |
| BD ENGINE BRAKE, Inc. LIMITED WARRANTY STATEMENT |
DISCLAIMER OF LIABILITY
BD Engine Brake Inc., its successors, distributors, jobbers, and dealers (hereafter “BD”) shall in no way be responsible for the product's proper use and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.
BD disclaims any warranty and expressly disclaims any liability for personal injury or damages. BD also disclaims any liability for incidental or consequential damages including, but not limited to, repair labor, rental vehicles, hotel costs, or any other inconvenience costs by reason of use or sale of any such equipment. The BUYER acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER agrees to indemnify BD and to hold BD harmless from any claim related to the item of any equipment purchased.
This warranty shall not apply to any unit that has been improperly stored or installed, or to misapplication, improper operation conditions, accidents, neglect, or which has been improperly repaired or altered or otherwise mistreated by the BUYER or his agent. BD also assumes no liability regarding the improper installation or misapplication of its products. It is the installer's responsibility to check for proper installation and if in doubt, contact the manufacturer.
LIMITATION OF WARRANTY
BD Engine Brake Inc. (hereafter "BD") warrants to the BUYER that any parts purchased shall be free from defects in material workmanship. A defect is defined as a condition within the product that would render the product inoperable. BD gives Limited Warranty as to description, quality, merchantability, fitness for any product’s purpose, productiveness, or any other matter of BD's product sold herewith. BD shall be in no way responsible for the product’s open use and service and the BUYER hereby waives all rights other than those expressly written herein. This Warranty shall not be extended or varied except by a written instrument signed by BD and the BUYER.
The Warranty is Limited to one (1) year from the date of sale and labor costs incurred by the removal and replacement of the BD product, while performing warranty work, will be covered for 1 (one) year, payable at BD rates, at authorized centers and with prior approval. Until BD has approved the claim, the consumer may be responsible for these costs.
A Return Authorization (WA) number, obtained in advance from BD, must accompany all products returned for warranty consideration. All products must be returned, shipping prepaid, to BD and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by BD and repaired or replaced product will be returned to the customer freight collect. Accepted warranty units, which have been replaced, become the sole property of BD.
This warranty is in lieu of all other warranties or guaranties, either expressed or implied, and shall not extend to any consumer or to any person other than the original purchaser residing within the boundaries of the continental U.S. or Canada.
