| AEM V2 Air Intake Systems |  |
|
|
||||||
|
|||||||||||||||||||||
Manufacturer Information View all AEM - Adanced Engine Management, Inc. products Manufacturer Documents Note: Adobe Reader is required to view PDF documents: Download Adobe Reader View available Products for this Product Line |
AEM Advanced Engine Management V2 intake systems use a patented dual chamber design to produce the most power and torque of any other intake system available, even AEM's Cold Air systems. On a dyno graph, the area under the power band (or power curve) represents the amount of effort that an engine is producing. The larger the overall area under the curve, the more power your engine is making. The AEM V2 air intake for imports utilizes a dual chamber (using two different diameters and lengths of piping) that creates multiple frequency sound waves to produce the largest area under the curve of any intake system on the market. These sound waves help charge the cylinders with more air throughout the entire rpm range and are what enables the AEM V2 air intake to outperform even the AEM Cold Air systems. Testing has found that inlet length plays a vital role in the power production of AEM V2 air intake systems and not all AEM V2 induction systems relocate the filter outside of the engine compartment. In these cases, AEM performed extensive temperature testing to locate the filter in the coolest area of the engine compartment to achieve the lowest inlet temperatures possible.
- Outperforms Every Intake System on the Market, even AEM's own Cold Air intakes
- 50-State Legal
- AEM’s Lifetime DRYFLOW Synthetic Air Filter is 99.4% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
- Inlet constructed of Light-Weight Aircraft Aluminum and mandrel bent for maximum flow
- Reinforced TIG-Welded brackets and fittings deliver added durability
- Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
- AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil!
- Comprehensive installation instructions, decals and license plate frame included
- Available in a powdercoated titanium-look finish
- Manufactured and Assembled in the USA
- Guaranteed For Life
- CLICK HERE to view the results of DRYFLOW's Filter Efficiency Test w/fine dust between a new and cleaned filter.
- CLICK HERE to view the results of DRYFLOW's Filter Efficiency Test w/coarse dust.
- AEM EXTREMELY abused the Synthetic DRYFLOW Air Filters with brake cleaner, window cleaner, industrial cleaner, bleach, Honda Brite, carb cleaner, weld prep and topped it off by blowing the filter out from the inside with 125psi directed air stream... Then sent it back for independent testing to see how efficient the filter would be. CLICK HERE to view the test results!
| Q: | What is a C.A.R.B. E.O. number? |
| A: | AEM intake systems carry or are pending approval for a California Air Resources Board Executive Order (CARB EO) number, exempting them from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. number allows you to legally use the AEM intake system on your car. |
| Q: | What does the soft mount do and how important is it? |
| A: | The majority of AEM air intake system designs mount to a vehicle in two locations. One mounting location is to the engine at the throttle body and the “cold” or filter end of the inlet pipe mounts to the body of the car. The movement of the engine on the engine mounts allows it to rock inside the engine bay, so we compensate for engine motion by using a soft mount that provides a flexible link for the inlet pipe between the engine and the body of the car. If you do not install the soft mount properly the inlet tube may break at the bracket weld and void the warranty on the intake system. Our instructions provide a detailed diagram of proper installation of the soft mount, and are viewable from the search results page for each application. |
| Q: | I have an engine swap. Which intake should I use? |
| A: | AEM manufactures hybrid intake systems for Hondas and Acuras with a popular engine swaps. These intakes are a direct fit and fully warranted. For cars with other engine swaps, we do not recommend using our intake because of potential fitment problems. If you elect to purchase an AEM intake for your engine swap application, we cannot guarantee proper fitment and any modifications to the intake system will void the manufacturer warranty. |
| Q: | What is the warranty on my AEM intake? |
| A: | AEM warrants that its intake systems will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. AEM will not warrant its powdercoating if the finish has been cleaned with a hydrocarbon-based solvent. The powdercoating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM intake system is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued. If you have a warranty issue, please call (310) 484-2322, extension 203 and our customer service department will assist you. A proof of purchase is required for all AEM warranty claims. |
| Q: | Why does AEM use aluminum for its intake piping? |
| A: | Our Chief Engineer John Concialdi provides an explanation of the difference between Aluminum vs. Steel vs. Plastic in inlet piping: The issue of heat absorption with an intake system has a degree of validity, however we have found that too much emphasis is placed on material selection, instead of the real issue of tuning the system. Our systems feature a unique shape and diameter because this is what we found to make the most useable torque and horsepower for each individual application in testing. However, for the purposes of this discussion, we will limit it to why we choose to make our systems from aluminum and the effects of heat absorption on all materials. If you do not wish to review all of this information right now, a quick synopsis of this discussion is outlined in the following bullet points, with complete topic discussions below:
We limit our use of plastic because this material absorbs some of the sound energy we work to create in the inlet duct. Although we use the best plastic material for our plenums, it is still not as resilient and does not retain the visual appeal of aluminum over long-term use. Because we have to use plastic on throttle body applications, we take extra precautions to ensure that the aluminum retaining ring that attaches to the throttle body is anchored securely into the plastic plenum; this is done by making an interlocking mechanical link between the plastic and aluminum. Whether or not an inlet system is made from aluminum, steel, or plastic, the thermal conductivity of the duct material has little effect on engine power. We have found that the tuning of the pipe, in addition to providing the coolest inlet air source, are the keys to making useable power. We perform engine inlet-air-temp studies when developing each application to determine the coolest location for sourcing inlet air. In addition to this, we determine the safest location for the inlet source to protect it from highly dusty conditions and water. To this end, we provide a stainless-steel heat shield to help minimize heat soak into the inlet area, as well as to provide protection from dust, dirt and mud. At light throttle opening, air speed and airflow at the inlet system are relatively low. The high residence time of air in the inlet while at low-throttle settings will increase inlet charge temps when materials with high thermal conductivity are used. Typically, when someone is at light throttle they are not asking the engine to make power. Most likely, fuel economy is the issue. When the throttle is fully opened however, air speed and airflow increase considerably. Typically, the inlet air speed of a 5.7L engine with a four-inch duct at full throttle is 34 feet-per-second, based on a volumetric efficiency of 70% and an engine speed of 3,000 rpm. Most inlet systems for every intake manufacturer for this engine are 30 inches or less. This means that the air in the duct of a 30-inch inlet length on this engine at the given rpm is 1/10th of a second—hardly enough time to transfer an appreciable amount of heat into the air stream on any system. Basically, the rate at which air travels through the inlet path under open throttle, when one is asking the engine for maximum power, negates the effect of material heat soak, regardless of the material. We hope that this helps to clear up the issues of material heat absorption in intake systems. |
| Q: | Can I use an AEM Bypass Valve with the V2? |
| A: | NO. AEM V2 Induction Systems utilize a dual chamber to create multiple frequency sound waves. The installation of the AEM Bypass Valve would disrupt the tuning of these systems, and in many cases the tube diameter of V2 systems exceeds the maximum size of the AEM BPV making it impossible to install. |
| Q: | Will an AEM intake void my new car warranty? |
| A: | NO. The only time this can happen is from improper installation that causes damage to a vehicle system. If a service technician denies your warranty claim ONLY because the car is modified with an AEM intake system and the vehicle system failure was not a direct result of the installation and use of an AEM intake, please refer him to the Magnusson Moss Warranty act. You can download the Magnusson Moss Warranty act from SEMA’s website at: http://www.enjoythedrive.com/san. |
| Q: | My V2 does not route the filter outside of the engine compartment. Why is my V2 application an underhood system? |
| A: | Just as some vehicles respond better to Short Ram systems (denoted in the search results), length and diameter of the dual chamber piping in a V2 induction system plays a vital role in creating power. Because of this, not all V2 systems relocate the filter outside of the engine compartment. AEM performs extensive R&D for every application (including V2 systems), both with respect to length tuning and inlet temperature testing. We will always manufacture the best performing product regardless of its configuration and do not subscribe to what the industry generally accepts as a “method” for manufacturing performance induction systems. We have manufactured air induction systems for 12 years, and over that time have developed a comprehensive testing standard that nets consistent results. In this regard, we develop V2 systems to produce maximum power, and this does not always mean that a V2 will have a long runner configuration. We pay particular attention to temperature testing on V2 systems with short intake runner configurations. In cases where a heat shield is necessary for keeping inlet air temperature under control, AEM will provide a powdercoated steel, laser-cut heat shield with the system. You can find a link to our temperature testing procedures right next to the link for our dyno testing procedures on the application search results page for our air induction systems. We also provide a link to our temperature testing results right next to our dyno results for each application. We do this to assure you that our test results prove each short runner system makes repeatable power under real world driving conditions. |
| Q: | Can I use an AEM Bypass Valve with the V2? |
| A: | NO. AEM V2 Induction Systems utilize a dual chamber to create multiple frequency sound waves. The installation of the AEM Bypass Valve would disrupt the tuning of these systems, and in many cases the tube diameter of the V-2 systems exceeds the maximum size of the AEM BPV making it impossible to install. |
| Q: | Where should I install my nitrous nozzle on my V2 inlet pipe? |
| A: | If you must install a nitrous nozzle on your inlet pipe, make sure that it is installed on the smaller primary pipe close to the throttle body. If you install it on the larger secondary pipe the nitrous can get trapped in the chamber and may not enter the inlet air stream. Ideally, the best place to install a single fogger nitrous system when using a V2 intake is in the throttle body plenum. |
| Q: | What is the warranty on my V2 intake? |
| A: | AEM warrants that its intake systems will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. AEM will not warrant its powdercoating if the finish has been cleaned with a hydrocarbon-based solvent. The powdercoating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM intake system is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued. If you have a warranty issue, please call (310) 484-2322, extension 203 and our customer service department will assist you. A proof of purchase is required for all AEM warranty claims. |
AEM warrants that its intake systems will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. AEM will not warrant its powdercoating if the finish has been cleaned with a hydrocarbon-based solvent. The powdercoating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM intake system is required for redemption of a warranty claim.
This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM.
This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM.
