Home > Electronics > Navigation Systems > Pilot Automotive NAV900 GPS Global Positioning Navigation System
| Pilot Automotive NAV900 GPS Global Positioning Navigation System |  |
|
|
||||||
|
|||||||||||||||||||||||||||||
Manufacturer Information View all Pilot Automotive products Manufacturer Documents Note: Adobe Reader is required to view PDF documents: Download Adobe Reader View available Products for this Product Line |
The Pilot Automotive GPS Portable Global Positioning Navigation System allows for easy and accurate travel or locating your destination. The Pilot GPS is an easy direct plug-in for your vehicle. Just switch it on and go! It is easy to read with the ultra responsive 3.5 inch full color, super bright touch screen panel with built-in Stylus for touch screen operations. Get a clear anti-glare view under direct sunlight! Handy Day or Night color auto switch with adjustable color settings. You won't get lost using the Visual and Voice prompt Turn by Turn navigation with Auto Map Zoom. And if you miss a turn...The Dynamic route and automatic re-route provides calculations that will get you back on the correct road. This unit has both 2D and 3D view options, and super intelligent Map Zoom and tilt system. Multi-Route Selection: Fastest, Shortest, Economical, Toll Road, Ferry, and CarPool selections. Multi-Type Vehicle Selection: Car, Taxi, Bus, Truck, Emergency, Bicycle, and Pedestrian selections. Other features include Speed alerts and speeding/safety camera locations inputs. The Rechargeable Battery allows 6 to 8 hours of continuous operation without external power. Installs easily with a windshield suction mount for the cradle, and a vibration free suction mount support. This GPS System is ready to roll with a preloaded map database of North America (US and Canada) and 12 million points of interest! Satellites help guide you with the NAV900's built-in high sensitivity GPS antenna and 20 channel GPS receiver. When you get where you are going, pack up the screen for security in the included carrying case.
- Intelligently designed - Designed for easy right or left handed use, with simple menus, convenient keys and with 120 degree view angle super bright 3.5" color touch screen, the industrial look complements any vehicle.
- Turn-by-turn voice and visual guidance - quickly and safely navigate your trip
- Built-in maps -2GB SD card with preloaded premium map of 50 United States, Puerto Rico and Canada.
- Over 12 million points of interest (POI) - Easily find gas stations, restaurants, banks, airports, parks and more
- Bird’s eye 3D view - Clearly see and allow you zoom in or out, for a clear picture of your surroundings
- Rechargeable battery - Navigate for up to 6~8 hours, when you don't have access to power
- Multi-Destination Routing method and Route Optimization- You can choose Car, Taxi, Bus or Truck, with 3 types of the route (Fastest, Shortest or Economical) or you can select Emergency, Bicycle or Pedestrian for your needs
- Auto fast Re-route - Never miss a turn, or if you do, quickly get back on track whenever you take a detour
- Auto day and night view - Adjusts color and contrast for easy day and night viewing
- Smart keyboard - Easily enter addresses with unique auto-complete feature
- Complete mobility - Transfers to any vehicle with no installation
- Interactive POI icons - Touch an onscreen icon for a nearby destination; see phone number and get an instant route
- Customizable route method - Fast Route, Shortest distance, use or no use of freeways, avoiding toll roads
- Via Route or pin - Select a location to swing by (a park for instance) before arrive your final destination
- My POI (Points of Interest) - Create and store personal points of interest to easily route to those locations in the future
| Pilot Automotive GPS Portable Global Positioning Navigation System | |
 |
Easily viewable Day or Night It is easy to read with the ultra responsive 3.5 inch full color, super bright touch screen panel with built-in Stylus for touch screen operations. Get a clear anti-glare view under direct sunlight! Handy Day or Night color auto switch with adjustable color settings. |
 |
Front View The Pilot Automotive GPS Portable Global Positioning Navigation System allows for easy and accurate travel or locating your destination. The Pilot GPS is an easy direct plug-in for your vehicle. Just switch it on and go! |
 |
Extends and Tilts This unit has both 2D and 3D view options, and super intelligent Map Zoom and tilt system. |
 |
Versatile mounting Installs easily with a windshield suction mount for the cradle, and a vibration free suction mount support. This GPS System is ready to roll with a preloaded map database of North America (US and Canada) and 12 million points of interest! |
 |
Antenna and Carrying Case Included Satellites help guide you with the NAV900's built-in high sensitivity GPS antenna and 20 channel GPS receiver. When you get where you are going, pack up the screen for security in the included carrying case. |
1. How can I power On/Off the device?
Press and hold Power button for 3 seconds to turn the device On/Off. Press for 1 second to switch the device into/back Standby mode. The device still draws a small amount of power from battery in Standby Mode.
2. Why my GPS screen go dark when the power cord is not plugged in? Why it go to Power save/sleep mode?
The Screen Saver mode will be activated if your Car charger/Power cord is not plugged in after 5 minutes. You can touch your GPS screen to recover. If you don’t recover Screen Saver mode and it will go to Standby Mode after 10 minutes if your power cord is still not plugged in. To turn it back on, please press power button for 1 second to switch back to Normal Mode.
3. How can I set my destination?
There are 2 ways you can find your destination.
a. In main menu,
• Tap “Find n Go” and then screen will show “Address”.
• Tap “Address” to find an address.
• In the next screen, it shows “Recent Cities” and the first line of list shows the city (or State) you are in.
• If the destination city is on the list, tap it.
• Tap “Other City” if your destination is not displayed. This will take you to the screen where you can specify a new city.
• Using the keyboard start entering the name of the destination city, then select from the list of matching city names.
• Tap “Change State” to search for a city in a different state.
• To search for a city in a different country, tap “Change Country”
• After selecting the city, start entering the name of the street. Once your entry matches the first five letters of the street name or less, all results will be displayed on the screen automatically.
• Tap “Done” any time to display a full list of matching streets immediately.
• From the list of matching street, using the Left and Right Button to select and tap the one matching your destination.
• With city and street selected, house number is the next.
• Use the Numeric keyboard to enter the house number or tap “Find intersection” to select one of the cross streets, And tap “Done” when finished.
• Once you complete setting the destination, the route will be immediately planned and you can start driving right away.
b. In the Cockpit or Map mode,
• Tap Menu, in Find section and screen shows “Address”.
• Tap “Address” to find an address.
• In the next screen, it shows “Recent Cities” and the first line of list shows the city (or State) you are in.
• If the destination city is on the list, tap it.
• Tap “Other City” if your destination is not displayed. This will take you to the screen where you can specify a new city.
• Using the keyboard start entering the name of the destination city, then select from the list of matching city names.
• Tap “Change State” to search for a city in a different state.
• To search for a city in a different country, tap “Change Country”
• After selecting the city, start entering the name of the street. Once your entry matches the first five letters of the street name or less, all results will be displayed on the screen automatically.
• Tap “Done” any time to display a full list of matching streets immediately.
• From the list of matching street, using the Left and Right Button to select and tap the one matching your destination.
• With city and street selected, house number is the next.
• Use the Numeric keyboard to enter the house number or tap “Find intersection” to select one of the cross streets, And tap “Done” when finished.
• The screen will show your destination and then tap “Route to”. The route will be immediately planned and you can start driving right away.
For More finding an address detail, please see the quick user guide or user manual CD in section 6.3.1. Page 77.
4. How can I adjust time for different time zone or adjust time different?
You can go Main menu and tap settings, you will see “Languages & Units”. Tap it and you can find “Set date & Time format” in next page. Tap it and you can adjust your time zoon. Or you can go Main Menu, Tap GPS Dash icon and screen will show GPS Data. Tap “Time Sync” at up-right corner. It will show “The Time setting page” and it will allow you to adjust local time by taping “+” or “-“.
5. How can I change my program language?
In Main Menu, Tap “Settings” and tap “Language & Units”. Under program Language, You will allow to adjust program language by taping the current language bar.
6. How can I change my guiding voice language?
In Main Menu, Tap “Settings” and tap “Language & Units”. Under Voice Language, You will allow to adjust Voice language by taping the current language bar.
7. On the Screen it shows No GPS Signal, what should I do?
First, make sure you are outdoors in an open space and not under any building or cover, including your garage. Restart your GPS again. You device should receive GPS signals within a few minutes.
Your device will usually acquire a GPS fix faster if your vehicle is stationary. It is more difficult to acquire a signal while driving. Your device may have trouble acquiring a GPS signal for several reasons:
Under normal weather condition and complete outdoor situation, your Navfly GPS device should receive GPS signals within a minute. But sometime it may take few more minutes.
9. How to setup my HOME and WORK address?
For the first time to set up your Home and Work Address, you can just tab MENU, under Find menu and tab HOME and WORK icons to set up your address. If you want to edit your Home or Work Address, you can go Main MENU, under “Settings”, tab “General” and you will find “Set your Favorite destination” to edit your Home or Work address.
10. What is different between COCKPIT and MAP?
The less detailed the map, the faster NAVFLY Navigator can draw and move it. You will find that NAVFLY Navigator has a very fast graphic engine that is capable of moving even detailed maps at high speed. Yet you may experience that the performance of some old PND models can be enhanced by decreasing the amount of detail on the map.
This setting has three values: More detailed, Normal, Less detailed (fast). They influence when NAVFLY Navigator hides and shows certain map features when zooming in or out. Setting a higher detail level will result in objects appearing sooner when zooming in.
Although the map visualization of NAVFLY Navigator is basically the same in Map and Cockpit modes, you can set a different map detail for each one, so the map is better suited for the purposes of that screen.
Having explained the contents of the map, the description of the other parts of the map screens follows. There are two map screens: the Map screen and the Cockpit screen. The way they show the map is the same but their look and controls are optimized for different purposes.
The Map screen is to be used mainly without a GPS, to browse the map, create user POI items, or to plan your route based on map points. The Map screen is designed to give you the maximum map area. This screen is usually used in 2D North-up mode (you can set NAVFLY Navigator so it always opens the Map screen like that ).
The Cockpit screen is for driving purposes. Besides showing the map, it contains some additional travel information if you are just cruising (speed, current street your are driving in, speed limit for the current street), and some more route data if you are navigating (e.g. next street in your route, distance to travel, type of the next route event). This screen is typically used in 3D Track-up mode (you can make NAVFLY Navigator always open the Cockpit screen like that ).
There are several controls that function in a similar fashion on the two screens.
11. What is my Navfly GPS Screen content meaning?
Map screen contents:
Cockpit screen contents:
* On Map screen only when a route is active
** Contents differ when a route is active
*** Only appears when a route is active
**** Only appears when a route is active and the next turn is near
12. How can I delete the route I set earlier?
You can go MENU, tab “Route” and then “Delete”.
13. What does “Lock” or “Follow” mean?
As described at the map screen functions, you can move, rotate, tilt and zoom the map during navigation. In these cases a Lock or Follow icon (Error! Reference source not found.) appears on the screen.
When you rotate, tilt or zoom the map, that part of Smart Zoom is automatically deactivated; the map will still follow your position, but will not change the view parameter you have modified. You can return to the full Smart Zoom mode by tapping the Lock or Follow button.
If you move the map, all parts of Smart Zoom become deactivated, and the view freezes. Tapping the Lock or Follow button makes NAVFLY Navigator follow your position again (Lock-to-Position) and also re-enables Smart Zoom.
You can make NAVFLY Navigator push the Lock or Follow button for you automatically after a few seconds of inactivity.
14. How can I set “Car pool”?
Inside Main MENU, tab “Settings” and then tab “Advance”. You will find Route Option. Under Route Option, you can select or deselect “Car Pool”.
15. How can I adjust the sound of voice and key?
Tab Main MENU, You can find “Sound” settings. Tab it, you will see Sound settings on this page determine the way NAVFLY Navigator sounds.
i. Master sound volume/switch The loudness of NAVFLY Navigator is independent of your PND settings. When you run NAVFLY Navigator, the position of this fader determines the device volume level. When you exit the program, the device settings return.
The left part of this control works as a mute button. Tap to mute all NAVFLY Navigator sounds. This works in tandem with the Mute button (Error! Reference source not found.) on the map screens. Switching one of them will change the status of the other.
ii. Voice guidance volume/switch The switch on the left can turn on or mute NAVFLY Navigator's audible guidance. When turned on, the slider on the right will adjust the loudness of voice prompts. In its leftmost position the voice guidance is suppressed, in its rightmost position the master volume applies.
iii. Key sound volume/switch The switch on the left can turn the key sounds on or off. Key sounds are audible confirmations of tapping the touch screen. When key sounds are turned on, the slider on the right will adjust their loudness. In its leftmost position the key sounds are suppressed, in its rightmost position they are played at the master volume level.
iv. Dynamic Volume When driving at high speed, the noise in the car may be too loud to clearly understand the voice guidance messages and to perceive the key sounds. Using Dynamic Volume you can instruct NAVFLY Navigator to increase the volume when your speed exceeds a certain minimum, and reach its highest volume (determined by the Master volume slider in Sound settings) at the given maximum speed.
Tap the Dynamic Volume button to turn on the feature. This will also open the screen where you can set the minimum and maximum speeds.
v. Attention Tone If this is set to Disabled, the voice guidance will sound without a preceding attention tone. Setting it to Single Tone will initiate a single attention tone before the instructions, while Double Tone will use a double tone.
16. How can I adjust display back light setting?
Inside Main MENU, Tab “Settings” and then tab “Advance”. You will find “Backlight Settings” Here you can set how backlight behaves when using NAVFLY Navigator.
17. How can I choose different route setting? What is the route parameter for? What is the different between Fast, Short and economical route?
You can go Main MENU and then tab “Settings”. You will see “Route parameter” settings
This is a very important function. Settings here determine how routes will be calculated. This screen is directly accessible from the Route Information screen
Method Use the handle to set the speed of the route calculation. In the leftmost position the route may not be optimal but the calculation will be very fast. Sliding it to the right will result in more accurate routing in an increased amount of time.
Note: Since NAVFLY Navigator calculates routes very quickly, the position of this slide is only used for long routes. Short routes are always calculated to give you the optimal result independent of the slider.
Route Here you can choose from three different route types.
Shortest Choosing Shortest will result in a route that has the smallest total distance of all possible routes between the given points. This is usually preferred by pedestrians, cyclists or slow vehicles.
Fastest Choosing Fastest will result in the quickest possible route, given that you can travel at or near the speed limits on all included roads. This is usually preferred for fast and normal cars.
Economical This setting is a wise combination of the previous two. Although basically going for the fastest solution, if there is another route taking a bit more time but a lot less distance compared to the fastest one, NAVFLY Navigator will choose this one instead to save fuel.
Vehicle You can set the type of the vehicle that you will use to navigate the route. Based upon this setting, some of the road types will be excluded from the route (e.g. Highways for pedestrians), or some of the restrictions may not be taken into account (e.g. emergency vehicles have no restrictions). Available values:
Note: Excluding a route is a preference. It does not necessarily mean total prohibition. If your destination can only be accessed using some of the excluded road types, NAVFLY Navigator will use them but only as much as necessary. In this case a warning icon will be shown on the Route Information screen (Error! Reference source not found.), and the road not matching your preference will be displayed in red (yellow at night) on the map.
Unpaved Roads Unpaved roads are excluded by default, as they can be in a bad condition and you usually cannot reach the speed limit on them.
Highway When driving a slow car or towing another vehicle, you may prefer not to take Highways. In this case change the default green to red.
Ferries The accessibility of temporary ferries is not necessarily included in the map data. Furthermore you may need to pay fare, so you may consider disabling them from the preset enabled status.
U-turns Although displayed amongst road types, this is a type of action. Most drivers prefer to replace them with a few normal left and/or right turns in the next few junctions, so it is disabled by default.
Turning back on dual carriageways is not considered as a u-turn.
Note: If you are not totally against u-turns, leave them on here, and add a certain penalty (equivalent extra distance to travel) in Advanced settings Route options (Error! Reference source not found.).
Note: Via points are handled as stopovers with regards to u-turns. It means disabling u-turns on this page will avoid u-turns during the entire route if possible, but when reaching a via point, the following part of the route may be planned starting in the opposite direction.
Permit needed To use some roads or enter some areas you may need special permit or permission from the owners. These roads are excluded from your routes by default. Use this switch if your vehicle is authorised to enter.
Toll Roads Toll roads are included in your routes by default. If you wish to travel more to avoid paying a toll, disabling them will make NAVFLY Navigator plan the best toll-free route for you.
18. How can I use PIN and Via? What does the Cursor Menu content mean?
The Cursor is the selected point on the map (marked by a red dot and radiating red circles around it), or the current GPS position when it is available and Lock-to-Position is enabled. When you tap the screen to place the Cursor, the Cursor menu pops up automatically to give you the list of possible functions you can use the Cursor for. At the same time Popup Info (street name, house number and the list of POIs nearby) appears near the selected map point if Popup Info is enabled in the Quick menu .
If you do not use the Cursor menu in a few seconds, it will automatically vanish back to the bottom of the screen, and Popup Info disappears, too. You can have them reappear by reopening the Cursor menu using the arrow in the bottom right corner. When you open the menu manually, it will stay on until you close it or switch to another screen.
Tip: If you want to see the map around the Cursor, close the Cursor menu and reopen it. When this menu is opened manually, the map is always moved to have the cursor in the centre.
The content of the Cursor menu depends on the screen (Map or Cockpit) and it is slightly different if there is an active route already planned. You have the following options:
· Start: use the Cursor as the departure point for your route. This menu point is available only in Map mode and when there is no active route. In Cockpit mode the departure point of the route is always the GPS position or if it is not available, the last known GPS position.
· Route To: use the Cursor as the destination of your route. This button is to start a new route. The previous route (if it exists) will be deleted and replaced. If a multi-point route is active, NAVFLY Navigator will ask you whether you really want to delete it together with all its via points.
· Add Via: by inserting the selected map point as a via, you instruct NAVFLY Navigator to cross this location before the destination of the route. This is the way to build a multi-point route in reverse order (when you wish to insert a stopover ‘go to A but first get some fuel at B’ or want to influence the direction of the route). This menu point works only if a route is already active.
· Remove Via: removes the ‘via point’ near or at the Cursor. The route will be recalculated immediately excluding the deleted point. This menu point replaces Add Via and is available only if the Cursor is near or at a via point.
· Continue: add a new destination to be reached after the previous destination. The new destination replaces the old one, which is now demoted to a via point. This is the way to build your multi-point route in straight order (when you wish to visit several destinations ‘go to A then to B’). This menu point is available only if a route is already active.
· Pin: push a Colored pin in the map at the selected point for later use. This pin is visible at all zoom levels and also appears in the History list together with its exact position. The Color of the pin is automatically selected by NAVFLY Navigator.
· Unpin: remove the pin near or at the Cursor. This menu point replaces Pin and is available only if the selected point is near or at a pin.
· Add POI: opens the new POI capture window to let you add the selected map point to the list of your user points. This menu point is only available on the Map screen and if there are no POIs near the cursor (i.e. only the address is shown in the Popup Info window).
· POI: opens the list of POIs near the selected point. These are the POIs shown in the Popup Info window. If you want to add a new POI at the cursor, you can do so by tapping New in the bottom left corner. This menu point replaces Add POI and it is only available in the Map screen and if there is at least one POI item near the Cursor.
19. How can I add or edit MY POI?
You can go Map mode, tab Menu then find your destination or POI and tab “Add POI”. It will be saved into “My POI”.
If you want to edit your POI, you can go Quick Tab: Manage POI (Points of Interest)
Here you can set all the parameters of POIs that you have created and the visibility of the built-in POIs that come with the map.
Manage built-in POI visibility The maps in NAVFLY Navigator come with a huge number of POIs. Displaying all of them would make the maps too crowded (to see how POI items are shown on the map see Error! Reference source not found.). In order to avoid that, you can decide which POI groups to show and which ones to hide on the map. NAVFLY Navigator has a multi-level POI category system. You can set the visibility of the top two levels. All levels below that will be shown or hidden according to their respective category (i.e. you can set the visibility of Petrol Stations in the Services category, but all brands listed under that will either be shown or suppressed together).
Groups shown with a grey icon ( ) are hidden; blue icons ( ) are visible on the map, while the ones shown in two Colors ( ) have some of their subcategories shown and some others hidden.
If you highlight any of the POI groups by tapping them, the button in the bottom left corner will become Show if the POI group is hidden, or Hide if the group is shown or partly shown.
Tip: To make a partly shown group fully shown, tap this button twice. First you will hide the whole group, and then you will have it displayed with all its subgroups.
Tapping again the highlighted POI group (except for My POI – described later) opens the list of subcategories of that group. Here you cannot see biColor subgroups, as visibility can only be set for the top two levels of categories. Showing and hiding a subgroup is done the same way as for the main groups.
Manage My POI By highlighting then tapping again the My POI switch on the Manage POI main screen you can manage the POI groups and items that you have created.
Note: The group Unnamed only appears if you have previously saved a POI item without creating a new POI group for it.
Tapping any of the group names will open a list of POIs saved in that group. This list is similar to the list of POI results in Find. The POIs are ordered based on their distance from your current position. If GPS position is not available or you have disabled Lock-to-Position by tapping the map, the POIs will be ordered by their distance from the Cursor.
When the My POI Groups are displayed, you have the following options:
· Show/Hide: similarly to built-in POIs, you have the possibility to show or hide all POIs of the selected category on the map. Groups with a blue icon are displayed; groups with a grey icon are hidden.
· New: you can create a new My POI group by tapping this button. You need to select an icon, a name, and the maximum zoom level at which the POI is still visible on the map (provided you let the POI group be displayed at all). You do not necessarily need to create POI groups in advance. You can do it while saving a new POI.
· Delete: you can delete any of your previously saved My POI groups. This will delete all POIs in that group. NAVFLY Navigator will ask you to confirm this action.
· Edit: you can edit the attributes (name, icon, visibility level) of a previously created My POI group.
· Previous/Next: if your groups fill several pages, these buttons will let you browse through them. The green field left of these buttons shows the current page number and the number of pages.
When the list of My POIs is displayed, you have the following options:
· Filter: you can shorten the list of matching POI items by filtering. Just like in Find, enter a few letters of the desired POI name. When the number of matching items can fit in one page, NAVFLY Navigator will automatically display the list. If you tap Done any time before this happens, you receive the list of matches on multiple pages.
· ABC/Distance: by tapping this button you can have the POIs sorted in an alphabetical order. Tapping again will return to the distance-based order.
When you tap on any of your POIs in the list, you will open a new window with the details of the selected POI.
Here you have the following options:
· Delete: you can delete any of your previously saved POIs. NAVFLY Navigator will ask you to confirm this action.
· Edit: you can edit the attributes (name, icon and group) of a previously created POI.
· OK: if you tap this button, the map screen returns with the selected POI in the middle.
20. How can I delete my Home & Work address?
Under “Advance”, you can find “User Data Management. Everything that was saved (pins, My POIs, Favorites, track logs etc.) or modified (Settings, History lists) since NAVFLY Navigator was installed is stored in a user database located in the RAM of the PND device. Here you have options to save, restore or reset the database or parts of it.
21. How can I clear the history of destination?
You can go MENU, tab “History” and you will find “ Clear History”.
22. How can it show function button (Tilt, down, zoom in and out) on screen? What function are these buttons for?
Inside Quick tab
This provides quick access to some configurable options.
1. 3D Map When the green light is on, the map shows a perspective view. When the green light is off, the map is displayed in a conventional top-down view. This 2D view is also the end of the tilt range, so it can also be accessed by tilting the map up. Conversely, 3D mode can be switched on by tilting down in 2D mode. Map view modes are described in your User menu Error! Reference source not found..
Note: When you reach 2D view by tilting the map, Smart Zoom will tilt the map as you press the Lock button or it disappears after the timeout (set in Advanced settings) expires. Use the 3D Map toggle to permanently switch to 2D view.
2. Zoom & Tilt When the green light is on, additional transparent buttons (Error! Reference source not found. and Error! Reference source not found.) appear on the left side of the map screens for zooming and tilting without the use of hardware buttons.
3. Night Mode Turn on or off the night Colors to override the automatic Color scheme switching.
23. Is GPS Service Free?
Yes! Once you purchase a GPS navigation system, there are never any monthly fees to pay. If you buy a GPS that has additional features, such as real-time traffic monitoring services, there may be a subscription fee. This is one of our most frequently asked questions
24. Can I update my Map data to my Navfly GPS SD card? Do I need to update my Navfly GPS map?
No, please do not attempt to edit, delete, copy, or overwrite the SD card that came with your Navfly GPS. Each SD card is unique and licensed to that one Navfly GPS unit. If you attempt to alter the SD card in any way, the SD card will no longer function.
Each Navfly GPS unit comes equipped with the most current map available thru Tele-Atlas. Optional updated maps will be released yearly. If you wish to purchase an updated version, please visit Navfly.com or authorized dealer.
Press and hold Power button for 3 seconds to turn the device On/Off. Press for 1 second to switch the device into/back Standby mode. The device still draws a small amount of power from battery in Standby Mode.
2. Why my GPS screen go dark when the power cord is not plugged in? Why it go to Power save/sleep mode?
The Screen Saver mode will be activated if your Car charger/Power cord is not plugged in after 5 minutes. You can touch your GPS screen to recover. If you don’t recover Screen Saver mode and it will go to Standby Mode after 10 minutes if your power cord is still not plugged in. To turn it back on, please press power button for 1 second to switch back to Normal Mode.
3. How can I set my destination?
There are 2 ways you can find your destination.
a. In main menu,
• Tap “Find n Go” and then screen will show “Address”.
• Tap “Address” to find an address.
• In the next screen, it shows “Recent Cities” and the first line of list shows the city (or State) you are in.
• If the destination city is on the list, tap it.
• Tap “Other City” if your destination is not displayed. This will take you to the screen where you can specify a new city.
• Using the keyboard start entering the name of the destination city, then select from the list of matching city names.
• Tap “Change State” to search for a city in a different state.
• To search for a city in a different country, tap “Change Country”
• After selecting the city, start entering the name of the street. Once your entry matches the first five letters of the street name or less, all results will be displayed on the screen automatically.
• Tap “Done” any time to display a full list of matching streets immediately.
• From the list of matching street, using the Left and Right Button to select and tap the one matching your destination.
• With city and street selected, house number is the next.
• Use the Numeric keyboard to enter the house number or tap “Find intersection” to select one of the cross streets, And tap “Done” when finished.
• Once you complete setting the destination, the route will be immediately planned and you can start driving right away.
b. In the Cockpit or Map mode,
• Tap Menu, in Find section and screen shows “Address”.
• Tap “Address” to find an address.
• In the next screen, it shows “Recent Cities” and the first line of list shows the city (or State) you are in.
• If the destination city is on the list, tap it.
• Tap “Other City” if your destination is not displayed. This will take you to the screen where you can specify a new city.
• Using the keyboard start entering the name of the destination city, then select from the list of matching city names.
• Tap “Change State” to search for a city in a different state.
• To search for a city in a different country, tap “Change Country”
• After selecting the city, start entering the name of the street. Once your entry matches the first five letters of the street name or less, all results will be displayed on the screen automatically.
• Tap “Done” any time to display a full list of matching streets immediately.
• From the list of matching street, using the Left and Right Button to select and tap the one matching your destination.
• With city and street selected, house number is the next.
• Use the Numeric keyboard to enter the house number or tap “Find intersection” to select one of the cross streets, And tap “Done” when finished.
• The screen will show your destination and then tap “Route to”. The route will be immediately planned and you can start driving right away.
For More finding an address detail, please see the quick user guide or user manual CD in section 6.3.1. Page 77.
4. How can I adjust time for different time zone or adjust time different?
You can go Main menu and tap settings, you will see “Languages & Units”. Tap it and you can find “Set date & Time format” in next page. Tap it and you can adjust your time zoon. Or you can go Main Menu, Tap GPS Dash icon and screen will show GPS Data. Tap “Time Sync” at up-right corner. It will show “The Time setting page” and it will allow you to adjust local time by taping “+” or “-“.
5. How can I change my program language?
In Main Menu, Tap “Settings” and tap “Language & Units”. Under program Language, You will allow to adjust program language by taping the current language bar.
6. How can I change my guiding voice language?
In Main Menu, Tap “Settings” and tap “Language & Units”. Under Voice Language, You will allow to adjust Voice language by taping the current language bar.
7. On the Screen it shows No GPS Signal, what should I do?
First, make sure you are outdoors in an open space and not under any building or cover, including your garage. Restart your GPS again. You device should receive GPS signals within a few minutes.
Your device will usually acquire a GPS fix faster if your vehicle is stationary. It is more difficult to acquire a signal while driving. Your device may have trouble acquiring a GPS signal for several reasons:
- Device does not have a clear view of sky
- Extreme weather such as clouds and storms
- Driving in mountainous regions or urban areas with tall buildings
- If your device fails to acquire a GPS signal for several minutes, you can restart the device. If your device consistently fails to acquire a GPS signal over several days even when none of the above conditions exist please submit an issue detailing the area you are traveling in by contacting our customer service.
Under normal weather condition and complete outdoor situation, your Navfly GPS device should receive GPS signals within a minute. But sometime it may take few more minutes.
9. How to setup my HOME and WORK address?
For the first time to set up your Home and Work Address, you can just tab MENU, under Find menu and tab HOME and WORK icons to set up your address. If you want to edit your Home or Work Address, you can go Main MENU, under “Settings”, tab “General” and you will find “Set your Favorite destination” to edit your Home or Work address.
10. What is different between COCKPIT and MAP?
The less detailed the map, the faster NAVFLY Navigator can draw and move it. You will find that NAVFLY Navigator has a very fast graphic engine that is capable of moving even detailed maps at high speed. Yet you may experience that the performance of some old PND models can be enhanced by decreasing the amount of detail on the map.
This setting has three values: More detailed, Normal, Less detailed (fast). They influence when NAVFLY Navigator hides and shows certain map features when zooming in or out. Setting a higher detail level will result in objects appearing sooner when zooming in.
Although the map visualization of NAVFLY Navigator is basically the same in Map and Cockpit modes, you can set a different map detail for each one, so the map is better suited for the purposes of that screen.
Having explained the contents of the map, the description of the other parts of the map screens follows. There are two map screens: the Map screen and the Cockpit screen. The way they show the map is the same but their look and controls are optimized for different purposes.
The Map screen is to be used mainly without a GPS, to browse the map, create user POI items, or to plan your route based on map points. The Map screen is designed to give you the maximum map area. This screen is usually used in 2D North-up mode (you can set NAVFLY Navigator so it always opens the Map screen like that ).
The Cockpit screen is for driving purposes. Besides showing the map, it contains some additional travel information if you are just cruising (speed, current street your are driving in, speed limit for the current street), and some more route data if you are navigating (e.g. next street in your route, distance to travel, type of the next route event). This screen is typically used in 3D Track-up mode (you can make NAVFLY Navigator always open the Cockpit screen like that ).
There are several controls that function in a similar fashion on the two screens.
11. What is my Navfly GPS Screen content meaning?
Map screen contents:
Cockpit screen contents:
| No. |
Display |
Control |
| 1 |
(Cockpit only) Turn preview* |
Opens Route menu* |
| 2 |
n/a |
Zooms in (optional) |
| 3 |
n/a |
Zooms out (optional) |
| 4 |
n/a |
Tilts down (optional) |
| 5 |
n/a |
Tilts up (optional) |
| 6 |
Indicates that Lock to GPS position and heading is inactive |
Re-enables Lock-to-Position / Smart Zoom |
| 7 |
Selected map point (Cursor) |
Opens Popup Info and Cursor menu |
| 8 |
(Map only) Map scale |
Zooms in/out by dragging |
| 9 |
n/a |
Menu (Find, Quick, Route, Main) |
| 10 |
Map orientation and Overview |
Switches North-up, Track-up and Overview |
| 11 |
GPS position quality |
Opens GPS Data screen |
| 12 |
Battery status |
Opens settings |
| 13 |
Sound on or muted |
Enables/disables muting |
| 14 |
Track Log recording or playback |
Opens Track Log screen |
| 15 |
n/a |
Opens Cursor menu |
| 16 |
(Cockpit only) Current street |
Opens Route Information screen |
| 17 |
(Cockpit only) Travel and Route data** |
Opens Route Information screen |
| 18 |
(Cockpit only) Distance to next turn*** |
n/a |
| 19 |
(Cockpit only) Next street*** |
n/a |
| 20 |
(Cockpit only) Approaching next turn**** |
n/a |
** Contents differ when a route is active
*** Only appears when a route is active
**** Only appears when a route is active and the next turn is near
12. How can I delete the route I set earlier?
You can go MENU, tab “Route” and then “Delete”.
13. What does “Lock” or “Follow” mean?
As described at the map screen functions, you can move, rotate, tilt and zoom the map during navigation. In these cases a Lock or Follow icon (Error! Reference source not found.) appears on the screen.
When you rotate, tilt or zoom the map, that part of Smart Zoom is automatically deactivated; the map will still follow your position, but will not change the view parameter you have modified. You can return to the full Smart Zoom mode by tapping the Lock or Follow button.
If you move the map, all parts of Smart Zoom become deactivated, and the view freezes. Tapping the Lock or Follow button makes NAVFLY Navigator follow your position again (Lock-to-Position) and also re-enables Smart Zoom.
You can make NAVFLY Navigator push the Lock or Follow button for you automatically after a few seconds of inactivity.
14. How can I set “Car pool”?
Inside Main MENU, tab “Settings” and then tab “Advance”. You will find Route Option. Under Route Option, you can select or deselect “Car Pool”.
15. How can I adjust the sound of voice and key?
Tab Main MENU, You can find “Sound” settings. Tab it, you will see Sound settings on this page determine the way NAVFLY Navigator sounds.
i. Master sound volume/switch The loudness of NAVFLY Navigator is independent of your PND settings. When you run NAVFLY Navigator, the position of this fader determines the device volume level. When you exit the program, the device settings return.
The left part of this control works as a mute button. Tap to mute all NAVFLY Navigator sounds. This works in tandem with the Mute button (Error! Reference source not found.) on the map screens. Switching one of them will change the status of the other.
ii. Voice guidance volume/switch The switch on the left can turn on or mute NAVFLY Navigator's audible guidance. When turned on, the slider on the right will adjust the loudness of voice prompts. In its leftmost position the voice guidance is suppressed, in its rightmost position the master volume applies.
iii. Key sound volume/switch The switch on the left can turn the key sounds on or off. Key sounds are audible confirmations of tapping the touch screen. When key sounds are turned on, the slider on the right will adjust their loudness. In its leftmost position the key sounds are suppressed, in its rightmost position they are played at the master volume level.
iv. Dynamic Volume When driving at high speed, the noise in the car may be too loud to clearly understand the voice guidance messages and to perceive the key sounds. Using Dynamic Volume you can instruct NAVFLY Navigator to increase the volume when your speed exceeds a certain minimum, and reach its highest volume (determined by the Master volume slider in Sound settings) at the given maximum speed.
Tap the Dynamic Volume button to turn on the feature. This will also open the screen where you can set the minimum and maximum speeds.
v. Attention Tone If this is set to Disabled, the voice guidance will sound without a preceding attention tone. Setting it to Single Tone will initiate a single attention tone before the instructions, while Double Tone will use a double tone.
16. How can I adjust display back light setting?
Inside Main MENU, Tab “Settings” and then tab “Advance”. You will find “Backlight Settings” Here you can set how backlight behaves when using NAVFLY Navigator.
17. How can I choose different route setting? What is the route parameter for? What is the different between Fast, Short and economical route?
You can go Main MENU and then tab “Settings”. You will see “Route parameter” settings
This is a very important function. Settings here determine how routes will be calculated. This screen is directly accessible from the Route Information screen
Method Use the handle to set the speed of the route calculation. In the leftmost position the route may not be optimal but the calculation will be very fast. Sliding it to the right will result in more accurate routing in an increased amount of time.
Note: Since NAVFLY Navigator calculates routes very quickly, the position of this slide is only used for long routes. Short routes are always calculated to give you the optimal result independent of the slider.
Route Here you can choose from three different route types.
Shortest Choosing Shortest will result in a route that has the smallest total distance of all possible routes between the given points. This is usually preferred by pedestrians, cyclists or slow vehicles.
Fastest Choosing Fastest will result in the quickest possible route, given that you can travel at or near the speed limits on all included roads. This is usually preferred for fast and normal cars.
Economical This setting is a wise combination of the previous two. Although basically going for the fastest solution, if there is another route taking a bit more time but a lot less distance compared to the fastest one, NAVFLY Navigator will choose this one instead to save fuel.
Vehicle You can set the type of the vehicle that you will use to navigate the route. Based upon this setting, some of the road types will be excluded from the route (e.g. Highways for pedestrians), or some of the restrictions may not be taken into account (e.g. emergency vehicles have no restrictions). Available values:
- Car
- Taxi
- Bus
- Truck
- Emergency
- Bicycle
- Pedestrian
Note: Excluding a route is a preference. It does not necessarily mean total prohibition. If your destination can only be accessed using some of the excluded road types, NAVFLY Navigator will use them but only as much as necessary. In this case a warning icon will be shown on the Route Information screen (Error! Reference source not found.), and the road not matching your preference will be displayed in red (yellow at night) on the map.
Unpaved Roads Unpaved roads are excluded by default, as they can be in a bad condition and you usually cannot reach the speed limit on them.
Highway When driving a slow car or towing another vehicle, you may prefer not to take Highways. In this case change the default green to red.
Ferries The accessibility of temporary ferries is not necessarily included in the map data. Furthermore you may need to pay fare, so you may consider disabling them from the preset enabled status.
U-turns Although displayed amongst road types, this is a type of action. Most drivers prefer to replace them with a few normal left and/or right turns in the next few junctions, so it is disabled by default.
Turning back on dual carriageways is not considered as a u-turn.
Note: If you are not totally against u-turns, leave them on here, and add a certain penalty (equivalent extra distance to travel) in Advanced settings Route options (Error! Reference source not found.).
Note: Via points are handled as stopovers with regards to u-turns. It means disabling u-turns on this page will avoid u-turns during the entire route if possible, but when reaching a via point, the following part of the route may be planned starting in the opposite direction.
Permit needed To use some roads or enter some areas you may need special permit or permission from the owners. These roads are excluded from your routes by default. Use this switch if your vehicle is authorised to enter.
Toll Roads Toll roads are included in your routes by default. If you wish to travel more to avoid paying a toll, disabling them will make NAVFLY Navigator plan the best toll-free route for you.
18. How can I use PIN and Via? What does the Cursor Menu content mean?
The Cursor is the selected point on the map (marked by a red dot and radiating red circles around it), or the current GPS position when it is available and Lock-to-Position is enabled. When you tap the screen to place the Cursor, the Cursor menu pops up automatically to give you the list of possible functions you can use the Cursor for. At the same time Popup Info (street name, house number and the list of POIs nearby) appears near the selected map point if Popup Info is enabled in the Quick menu .
If you do not use the Cursor menu in a few seconds, it will automatically vanish back to the bottom of the screen, and Popup Info disappears, too. You can have them reappear by reopening the Cursor menu using the arrow in the bottom right corner. When you open the menu manually, it will stay on until you close it or switch to another screen.
Tip: If you want to see the map around the Cursor, close the Cursor menu and reopen it. When this menu is opened manually, the map is always moved to have the cursor in the centre.
The content of the Cursor menu depends on the screen (Map or Cockpit) and it is slightly different if there is an active route already planned. You have the following options:
· Start: use the Cursor as the departure point for your route. This menu point is available only in Map mode and when there is no active route. In Cockpit mode the departure point of the route is always the GPS position or if it is not available, the last known GPS position.
· Route To: use the Cursor as the destination of your route. This button is to start a new route. The previous route (if it exists) will be deleted and replaced. If a multi-point route is active, NAVFLY Navigator will ask you whether you really want to delete it together with all its via points.
· Add Via: by inserting the selected map point as a via, you instruct NAVFLY Navigator to cross this location before the destination of the route. This is the way to build a multi-point route in reverse order (when you wish to insert a stopover ‘go to A but first get some fuel at B’ or want to influence the direction of the route). This menu point works only if a route is already active.
· Remove Via: removes the ‘via point’ near or at the Cursor. The route will be recalculated immediately excluding the deleted point. This menu point replaces Add Via and is available only if the Cursor is near or at a via point.
· Continue: add a new destination to be reached after the previous destination. The new destination replaces the old one, which is now demoted to a via point. This is the way to build your multi-point route in straight order (when you wish to visit several destinations ‘go to A then to B’). This menu point is available only if a route is already active.
· Pin: push a Colored pin in the map at the selected point for later use. This pin is visible at all zoom levels and also appears in the History list together with its exact position. The Color of the pin is automatically selected by NAVFLY Navigator.
· Unpin: remove the pin near or at the Cursor. This menu point replaces Pin and is available only if the selected point is near or at a pin.
· Add POI: opens the new POI capture window to let you add the selected map point to the list of your user points. This menu point is only available on the Map screen and if there are no POIs near the cursor (i.e. only the address is shown in the Popup Info window).
· POI: opens the list of POIs near the selected point. These are the POIs shown in the Popup Info window. If you want to add a new POI at the cursor, you can do so by tapping New in the bottom left corner. This menu point replaces Add POI and it is only available in the Map screen and if there is at least one POI item near the Cursor.
19. How can I add or edit MY POI?
You can go Map mode, tab Menu then find your destination or POI and tab “Add POI”. It will be saved into “My POI”.
If you want to edit your POI, you can go Quick Tab: Manage POI (Points of Interest)
Here you can set all the parameters of POIs that you have created and the visibility of the built-in POIs that come with the map.
Manage built-in POI visibility The maps in NAVFLY Navigator come with a huge number of POIs. Displaying all of them would make the maps too crowded (to see how POI items are shown on the map see Error! Reference source not found.). In order to avoid that, you can decide which POI groups to show and which ones to hide on the map. NAVFLY Navigator has a multi-level POI category system. You can set the visibility of the top two levels. All levels below that will be shown or hidden according to their respective category (i.e. you can set the visibility of Petrol Stations in the Services category, but all brands listed under that will either be shown or suppressed together).
Groups shown with a grey icon ( ) are hidden; blue icons ( ) are visible on the map, while the ones shown in two Colors ( ) have some of their subcategories shown and some others hidden.
If you highlight any of the POI groups by tapping them, the button in the bottom left corner will become Show if the POI group is hidden, or Hide if the group is shown or partly shown.
Tip: To make a partly shown group fully shown, tap this button twice. First you will hide the whole group, and then you will have it displayed with all its subgroups.
Tapping again the highlighted POI group (except for My POI – described later) opens the list of subcategories of that group. Here you cannot see biColor subgroups, as visibility can only be set for the top two levels of categories. Showing and hiding a subgroup is done the same way as for the main groups.
Manage My POI By highlighting then tapping again the My POI switch on the Manage POI main screen you can manage the POI groups and items that you have created.
Note: The group Unnamed only appears if you have previously saved a POI item without creating a new POI group for it.
Tapping any of the group names will open a list of POIs saved in that group. This list is similar to the list of POI results in Find. The POIs are ordered based on their distance from your current position. If GPS position is not available or you have disabled Lock-to-Position by tapping the map, the POIs will be ordered by their distance from the Cursor.
When the My POI Groups are displayed, you have the following options:
· Show/Hide: similarly to built-in POIs, you have the possibility to show or hide all POIs of the selected category on the map. Groups with a blue icon are displayed; groups with a grey icon are hidden.
· New: you can create a new My POI group by tapping this button. You need to select an icon, a name, and the maximum zoom level at which the POI is still visible on the map (provided you let the POI group be displayed at all). You do not necessarily need to create POI groups in advance. You can do it while saving a new POI.
· Delete: you can delete any of your previously saved My POI groups. This will delete all POIs in that group. NAVFLY Navigator will ask you to confirm this action.
· Edit: you can edit the attributes (name, icon, visibility level) of a previously created My POI group.
· Previous/Next: if your groups fill several pages, these buttons will let you browse through them. The green field left of these buttons shows the current page number and the number of pages.
When the list of My POIs is displayed, you have the following options:
· Filter: you can shorten the list of matching POI items by filtering. Just like in Find, enter a few letters of the desired POI name. When the number of matching items can fit in one page, NAVFLY Navigator will automatically display the list. If you tap Done any time before this happens, you receive the list of matches on multiple pages.
· ABC/Distance: by tapping this button you can have the POIs sorted in an alphabetical order. Tapping again will return to the distance-based order.
When you tap on any of your POIs in the list, you will open a new window with the details of the selected POI.
Here you have the following options:
· Delete: you can delete any of your previously saved POIs. NAVFLY Navigator will ask you to confirm this action.
· Edit: you can edit the attributes (name, icon and group) of a previously created POI.
· OK: if you tap this button, the map screen returns with the selected POI in the middle.
20. How can I delete my Home & Work address?
Under “Advance”, you can find “User Data Management. Everything that was saved (pins, My POIs, Favorites, track logs etc.) or modified (Settings, History lists) since NAVFLY Navigator was installed is stored in a user database located in the RAM of the PND device. Here you have options to save, restore or reset the database or parts of it.
21. How can I clear the history of destination?
You can go MENU, tab “History” and you will find “ Clear History”.
22. How can it show function button (Tilt, down, zoom in and out) on screen? What function are these buttons for?
Inside Quick tab
This provides quick access to some configurable options.
1. 3D Map When the green light is on, the map shows a perspective view. When the green light is off, the map is displayed in a conventional top-down view. This 2D view is also the end of the tilt range, so it can also be accessed by tilting the map up. Conversely, 3D mode can be switched on by tilting down in 2D mode. Map view modes are described in your User menu Error! Reference source not found..
Note: When you reach 2D view by tilting the map, Smart Zoom will tilt the map as you press the Lock button or it disappears after the timeout (set in Advanced settings) expires. Use the 3D Map toggle to permanently switch to 2D view.
2. Zoom & Tilt When the green light is on, additional transparent buttons (Error! Reference source not found. and Error! Reference source not found.) appear on the left side of the map screens for zooming and tilting without the use of hardware buttons.
3. Night Mode Turn on or off the night Colors to override the automatic Color scheme switching.
23. Is GPS Service Free?
Yes! Once you purchase a GPS navigation system, there are never any monthly fees to pay. If you buy a GPS that has additional features, such as real-time traffic monitoring services, there may be a subscription fee. This is one of our most frequently asked questions
24. Can I update my Map data to my Navfly GPS SD card? Do I need to update my Navfly GPS map?
No, please do not attempt to edit, delete, copy, or overwrite the SD card that came with your Navfly GPS. Each SD card is unique and licensed to that one Navfly GPS unit. If you attempt to alter the SD card in any way, the SD card will no longer function.
Each Navfly GPS unit comes equipped with the most current map available thru Tele-Atlas. Optional updated maps will be released yearly. If you wish to purchase an updated version, please visit Navfly.com or authorized dealer.
| 25. |
My device takes a long time to acquire or can not acquire a GPS signal |
| Answer |
|
Your device will usually acquire a GPS fix faster if your vehicle is stationary. It is more difficult to aquire a signal while driving. Your device may have trouble acquiring a GPS signal for several reasons:
|
PILOT GPS
The Finest Art of Portable All-in-one navigation system
NAV900 Product Features and Specification.
Features:
Operation System: Windows CE .net 4.2
CPU: Freescale MX21 266MHz 32 bit microprocessor
GPS Receiver: SiRF Star III sensitivity chip, 20 GPS receiver channels.
Antenna: Built-in internal antenna and external connector (MMCX)
Internal Memory: SDRAM 64MB, NOR Flash 8MB, NAND Flash 64MB.
Audio: Internal speaker 1W with 3.5mm stereo earphone jack
Power Source: Mini USB connector DC 5.0V/ 500ma.
Battery: Rechargeable Li-Polymer battery 2000mah,
Continuous operation time 6~8 hours, charging time 4~6 hours.
Interface: 1 SD/MMC socket. 1 Mini USB connector.
Physical Dimensions: 100mm(L) x 82.5mm(W) x 29mm(H). Weight 0.5lb.
Range of Temperature: Operating –20C~60C, Storage –30C~70C
The Finest Art of Portable All-in-one navigation system
NAV900 Product Features and Specification.
Features:
- Super Bright 3.5" 16.7 Million Color Touch Screen, With 120 Degree View Angle
- Easy Touch Screen Operation
- Clear View Under Direct Sunlight, Anti-Glare
- 2GB SD Card With Preloaded 2007 Map From Tele Atlas, Including 50 US States, Puerto Rico and Canada
- 12 Million Point Of interest (POI), with Quick Search Function ~Built-in SiRF Star III 20 Channel GPS Chipset With WASS System
- Super Fast Acquisition Time: Warm Start 1 Second, Cold Start 30 Seconds With Embedded Active High Sensitivity Antenna
- Accurate GPS positioning
- Advance Voice Navigation By DTS System
- Fastest Route And Miss Turn Re-Route Calculation By 32-Bit CPU Processor
- Multi-Route Selection: Fastest, Shortest, Economical, Toll road, Ferry and Carpool
- Multi-Type Vehicle Selection: Car, Taxi, Bus, Truck, Emergency, Bicycle and Pedestrian
- Built-in over 20 languages. US English, UK English, Croatian, Czech Danish, Dutch, Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Slovakian, Spanish, Swedish, Turkish, Chinese Voice.
Operation System: Windows CE .net 4.2
CPU: Freescale MX21 266MHz 32 bit microprocessor
GPS Receiver: SiRF Star III sensitivity chip, 20 GPS receiver channels.
Antenna: Built-in internal antenna and external connector (MMCX)
Internal Memory: SDRAM 64MB, NOR Flash 8MB, NAND Flash 64MB.
Audio: Internal speaker 1W with 3.5mm stereo earphone jack
Power Source: Mini USB connector DC 5.0V/ 500ma.
Battery: Rechargeable Li-Polymer battery 2000mah,
Continuous operation time 6~8 hours, charging time 4~6 hours.
Interface: 1 SD/MMC socket. 1 Mini USB connector.
Physical Dimensions: 100mm(L) x 82.5mm(W) x 29mm(H). Weight 0.5lb.
Range of Temperature: Operating –20C~60C, Storage –30C~70C
This product offers an easy, at home no drill installation. The installation instructions manual is clear cut and easy to read. For additional information, please call us toll free 7-days a week at 1-866-309-1907 or 701-253-5906.
