Home > Exterior Accessories > Racks, Carriers, Baskets > Hitch Baskets, Racks & Carriers > ATV Solutions Tilt-A-Rack Mobility Products
| ATV Solutions Tilt-A-Rack Mobility Products |  |
|
|
||||||
|
|||||||||||||||||||||||||||||
Manufacturer Information View all ATV Solutions Inc products View available Products for this Product Line |
Electric Mobility Scooter, Electric Power Chair and Wheelchair users know the problems associated with loading and unloading their vehicles. The disassembling process is time consuming. Lifting the heavy machinery into the trunk of a car or loading it into a non-handicap friendly vehicle is painful and inconvenient to say the least. The ATV Solutions Tilt-A-Rack Mobility Product Carrier helps alleviate problems caused by traditional power chair, wheelchair, or scooter carriers and racks. Constructed from lightweight yet durable aircraft grade aluminum Tilt-A-Racks offer a reliable alternative to expensive and complicated lifts and ramps.
- Rugged and Durable Construction: Constructed from lightweight and durable aircraft grade aluminum, with solid aluminum cargo decks.
- Installs Quickly: Installs quickly and easily in minutes to a 2" Class III or IV receiver hitch.
- Innovative Tilt Feature: Simply pull the handle and the rack tilts easily towards the passenger side, then slide the Deck Extender out and it reaches the curb, allowing easy curb side loading.
- Easy to Use: Just drive your scooter or power chair up the ramp and it automatically levels as your mobility device moves forward.
- Multiple Uses: Can be used as a receiver hitch mounted cargo carrier as well as a mobility product carrier.
- Folds Up Quickly: Tilt-A-Rack Mobility Products can quickly and easily folded up when not in use.
- 500ARV Plus: The Plus mechanism allows the loaded carrier to lift and float over dips and curbs.
| Mobility Products | |
 |
All Aluminum Construction Tilt-A-Rack Mobility Products are constructed from Aircraft-Grade Aluminum. |
 |
Auto Leveling Ramp Simply drive your power chair or scooter foreward and the ramp autumatically levels. |
 |
Unique Ramp System All ATV Solutions Tilt-A-Rack Mobility products feature a unique ramp system, allowing easy curb side service on the passenger side of the vehicle. |
 |
Receiver Hitch Mounted Tilt-A-Rack mobility products easily fit into existing receiver hitch mounts |
 |
Convienently Folds Up Quickly and easily folds out of the way when not in use. |
 |
Quick and Easy Operation. Offering quick and easy one person operations Tilt-A-Rack Mobility products are an excellent replacement for expensive and akward chairlifts. |
| Model | Max Load | Usable Dimensions | Receiver Class | Unit Weigth | Shipping Weight |
| Mobility Scooter Carrier for the smaller Travel Scooters, Power Chairs and Wheelchairs | |||||
| 350ARV Mini | 350 lbs. | 44"x24" | II & III | 46 lbs. | 50 lbs. |
| Mobility Scooter Carrier for the mid-sized Scooters and Power Chairs | |||||
| 350ARV | 350 lbs. | 52"x26" | II & III | 58 lbs. | 62 lbs. |
| Mobility Scooter Carrier for the full-sized Scooters and Power Chairs | |||||
| 500ARV | 500 lbs. | 60"x32" | II & III | 80 lbs. | 85 lbs. |
| 500ARV Plus 500SRV |
500 Lbs. 500 Lbs. |
63"x38" 48"x28" |
III or Greater III or Greater |
100 lbs. 88 lbs. |
105 lbs. 90 lbs |
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
This product offers an easy, at home no drill installation. The installation instructions manual is clear cut and easy to read. For additional information, please see the installation manual below. You may also call us toll free 7-days a week at 1-866-309-1907 or 701-253-5906.
Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
 |
Using Your Tilt-A-Rack Product The first step in putting a scooter or power chair on your ATV Solutions Tilt-A-Rack Mobility Carrier is to Tilt it down level from the upright position. |
 |
Remove The End Bar Then remove the end bar on the loading side (passenger side of the vehicle). |
 |
Pull The Deck Extender Out The next step is to then extend the deck extender into the `out` position for laoding. |
 |
Remove The Saftey Pin The next two steps are to remove the saftey pin from the opposite side of the spring handle, and then pull on the spring handle until it is fully extended. Rotate the handle up and place it on the side of the main deck. |
 |
Tilt For Loading Now the unit should be tilted towards the passenger side of the vehicle, it is now ready for loading. |
 |
Load Your Scooter or Powechair Drive your scooter or powerchair up the ramp, unit should level out automatically. |
 |
Push The Deck Extender Back Into Place Push the deck extender back into place, and then rotate the spring handle back into its locked postion. Replace the saftey pin into opposite side of the spring handle. |
 |
Replace The End Bar Then replace the end bar. |
 |
Secure your Scooter or Power Chair Secure your scooter or power chair to the Tilt-A-Rack Mobility Carrier with tie down straps (Not Included) and you are ready to hit the road! |
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
ATV Solutions Inc. (Manufacturer), directly or through its Authorized Distributors and Dealers, warrants Tilt-a-RackŪ (Products) as follows:
1. Limited Warranty. Manufacturer warrants that all Tilt-A-RackŪ & Toy Rack Products sold hereunder: Will be free from defects in material and workmanship for a period of one year (12 months) on the original surface and as delivered to the end consumer (any scratches, dings, drilled holes or any unauthorized modifications will not be covered under this Warranty) from the date of purchase when used in accordance with the manufacturer’s assembly and operating instructions. If the products do not conform to this Limited Warranty during the warranty period (as herein specified), Buyer shall notify the selling Dealer (place of purchase), in writing and with proof of purchase, within the warranty period, that the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, at its own expense, furnish a replacement Product or, at Manufacturer’s option, replacement parts for the defective Product. Shipping back to the Manufacturer and installation of the replacement Products or replacement parts shall be at Buyer’s expense.
2. Other Limits. THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Manufacturer does not warrant against damages or defects arising out of improper or abnormal use or handling of the Products; against defects or damages arising from improper installation, against defects in products or components. The Manufacturer, Distributors and selling agents of Tilt-a-RackŪ & Toy Rack carriers will not be responsible in any way for damage to, or loss of, any items being carried or falling from the carriers or subsequent damages such items cause on or off carriers. This warranty also does not apply to Products upon which repairs have been made or attempted by persons other than pursuant to written authorization by Manufacturer. Light kits, and wiring harness are not covered by this warranty.
1. Limited Warranty. Manufacturer warrants that all Tilt-A-RackŪ & Toy Rack Products sold hereunder: Will be free from defects in material and workmanship for a period of one year (12 months) on the original surface and as delivered to the end consumer (any scratches, dings, drilled holes or any unauthorized modifications will not be covered under this Warranty) from the date of purchase when used in accordance with the manufacturer’s assembly and operating instructions. If the products do not conform to this Limited Warranty during the warranty period (as herein specified), Buyer shall notify the selling Dealer (place of purchase), in writing and with proof of purchase, within the warranty period, that the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, at its own expense, furnish a replacement Product or, at Manufacturer’s option, replacement parts for the defective Product. Shipping back to the Manufacturer and installation of the replacement Products or replacement parts shall be at Buyer’s expense.
2. Other Limits. THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Manufacturer does not warrant against damages or defects arising out of improper or abnormal use or handling of the Products; against defects or damages arising from improper installation, against defects in products or components. The Manufacturer, Distributors and selling agents of Tilt-a-RackŪ & Toy Rack carriers will not be responsible in any way for damage to, or loss of, any items being carried or falling from the carriers or subsequent damages such items cause on or off carriers. This warranty also does not apply to Products upon which repairs have been made or attempted by persons other than pursuant to written authorization by Manufacturer. Light kits, and wiring harness are not covered by this warranty.
