Home > Exterior Accessories > Tonneau Covers & Tops > Truck Bed Covers - Hard > Retracting Truck Bed Covers > Pace Edwards BedLocker Hard Retracting Electric Bed Covers
| Pace Edwards BedLocker Hard Retracting Electric Bed Covers |  |
|
|
||||||
|
|||||||||||||||||||||||||||||||||||||||||
Manufacturer Information View all Pace Edwards products Manufacturer Documents Note: Adobe Reader is required to view PDF documents: Download Adobe Reader View available Products for this Product Line |
The BedLocker electric hard retractable truck tonneau cover is the ultimate in truck covers. The durable black powder-coat finished aluminum panels glide smoothly along the rails with just the push of a button. The Electromagnetic brake allows you to lock the cover in any position. The 2 button remote control can be wired to OE power door locks. The Bedlocker opens and closes easily with the push of a button. When closed it keeps your stuff dry and secure. Open it with the push of a button when you need to haul. The speedclamp installation system is self-leveling and the no-drill, self-adjusting clamp on design saves installation time. It works great with 5th wheel trailer hitches. It's aerodynamic design increases fuel economy. It works great with an optional power tailgate lock.
- Tonneau Technology: Bedlocker electric Hard tonneau cover retracts into canister at the front of the truck bed with the push of a button.
- 2 Button Remote: The truck bed cover operates with 2-button remote control which can be wired to OE power door locks.
- Heavy Duty Tonneau Design: Made of strong heavy gauge rigid aluminum panels with a durable, tough, high quality textured black powder-coat finish.
- Smooth Operation: Patented silicon weather hinge provides a tight seal between the aluminum Panels. The cover (rigid aluminum panels) glide smoothly along black powder-coated side rails
- SpeedClamps: Bedlocker features the patented self-leveling SpeedClamp installation system. This installation system makes Bedlocker the easiest to install electric cover.
- Gas Savings: The low profile, flush aerodynamic design increases fuel economy up to 11% .
- Electromagnetic brake: Allows you to lock the cover in any position for added flexibility.
- All Purpose Cover: Opens in seconds when you need your truck bed for easy accessibility or hauling large items. Plus it works well with 5th wheel trailer hitches.
- No Drill Installation: The self-adjusting clamp-on design (most applications) allows for installation in about 90 minutes. Add 30 minutes if you have an over the rail bedliner (See Installation Tab for additional information)
- Easy Truck Bed Access: The Bedlocker opens and closes easily with the push of a button. When closed it keeps your stuff dry and secure. Open it with the push of a button when you need to haul.
- Made by Pace Edwards Company: the orginators of the hard retracting truck bed cover. Backed by Pace-Edwards full 3-year warranty.
- Normal Tailgate Operation: The tailgate operates independently of the cover. You may want to purchase an optional tailgate lock to secure your tailgate.
- Optional Explorer Series Rails: The Bed locker retractable hard tonneau is also available with optional Explorer Series Rails. The Bed Locker with Explorers Series Rails allow you to use your BedLocker with the Pace-Edwards Utility Rig® Truc Rack, Contractor Rig® Truck Rack or Thule® Load Bars with Accessories. Please see the specific product pages from complete details.
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
| BedLocker Features | |
 |
All Purpose Cover Opens in seconds when you need your truck bed for easy accessibility or hauling large items. Plus it works well with 5th wheel trailer hitches. |
 |
BedLocker Drawing Detail Made of strong heavy gauge rigid aluminum panels with a durable, tough, high quality textured black powder-coat finish. Patented silicon weather hinge provides a tight seal between the aluminum Panels. The cover glides smoothly along black powder-coated side rails |
 |
Electromagnetic brake Electromagnetic brake: Allows you to lock the cover in any position for added flexibility |
 |
Gas Savings The low profile, flush aerodynamic design increases fuel economy up to 11% |
 |
Improved Aerodynamics The low profile, flush aerodynamic design increases fuel economy up to 11% |
 |
No Drill Installation The self-adjusting clamp-on design (most applications) allows for installation in about an hour. Add 30 minutes if you have an over the rail bedliner |
 |
Speed Clamp Bedlocker features the patented self-leveling SpeedClamp installation system. This installation system makes Bedlocker the easiest to install electric cover. |
 |
Normal Tailgate Operation The tailgate operates independently of the cover. You may want to purchase an optional tailgate lock to secure your tailgate. |
 |
Optional Explorer Rails Optional Explorer Series Rails: The Bed locker retractable hard tonneau is also available with optional Explorer Series Rails. The Bed Locker with Explorers Series Rails allow you to use your BedLocker with the Pace-Edwards Utility Rig® Truc Rack, Contractor Rig® Truck Rack or Thule® Load Bars with Accessories. Please see the specific product pages from complete details. |
 |
Pace Edwards Warranty Pace Edwards Company prides itself in fast, friendly warranty service for all of our products. Our goal is to design quality into everything we make. We warrant our products to be free from defects in material and workmanship under normal use for 3 years from the date of purchase. |
 |
Powder Coat Finish Made of strong heavy gauge rigid aluminum panels with a durable, tough, high quality textured black powder-coat finish. |
How does the Bedlocker work? The Bedlocker is powered by an electric motor in the canister that opens and closes the cover along rails fastened to the truck bed via a remote control.
What is the Bedlocker made of? The Bedlocker is manufactured out of heavy gauge extruded aluminum panels with a black textured powder coat finish for increased strength and durability that are fastened together with a patented silicone hinge seal.
Will the cover keep the truck bed dry? What about ice and snow? The Bedlocker is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the silicone hinge sealed top, however water may intrude into the bed via components that are not part of the cover such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof. Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed and the canister box. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.
Is the cover hard to install? How long will installation take? The installation of the Bedlocker is relatively easy. The most time consuming part of the installation is the running of the wire harness down the frame rail of the truck. As for the electrical part you will just be connecting the positive (red) wire and the negative (black) wire directly to the battery. Installation should take under 1 hour for the professional and 1½-2 hours for a first time installer. See the installation tab for addtional information
How does the Bedlocker lock? The Bedlockers electromagnetic brake system locks the cover automatically in any position.
Will the cover improve my gas mileage? How? Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. See below the attached PDF of the press release information on gas mileage savings. Input from customers and our own experience bear out the accuracy of this claim.
Will the cover work with my bedliner? The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See below the attached Bedliner Modification sheet.
Is there a warranty on the Bedlocker? Yes, there is a three-year factory defect warranty on all parts. See Pace-Edwards Warranty information for complete details.
What do I do if I accidentally get caught between the blanket and the tailgate? The controller is programmed to not set the brake for 5 seconds after the blanket comes to a stop. This 5 second pause will give you time to push the cover away enough to eliminate pinching yourself. (You will need to push very hard to move it).
How much weight will my cover hold, can I walk on it? Your BedLocker is not weight rated for load carrying. It is able to hold a substantial amount of weight especially if it’s evenly distributed such as a snow load. If you would like to carry something above your cover please see our ExplorerSeries Rails and Racks.
Can a garage door opener operate my cover? The BedLocker uses a rolling code to secure your cover. This gives you approximately 7 million random codes that change each time you push the button. It would be unlikely that a random garage door opener could open your cover.
Does my engine have to be running to operate the cover? No your cover will operate on battery only however, you will notice that it does run slightly faster with the engine running. The controller will not operate if the amperage draw falls below 10.5 amps. This will still allow you to crank the engine.
Is a cab-mounted toggle switch available? Yes, you can purchase a toggle switch kit that plugs directly into the controllers extra pigtail which will allow you to operate the cover with the flick of a switch.
Bedlocker Care and Maintenance: After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister. To help keep the Bedlocker retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However due to the hammer texture, removal of wax can be difficult so you should not wax your cover.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
What is the Bedlocker made of? The Bedlocker is manufactured out of heavy gauge extruded aluminum panels with a black textured powder coat finish for increased strength and durability that are fastened together with a patented silicone hinge seal.
Will the cover keep the truck bed dry? What about ice and snow? The Bedlocker is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the silicone hinge sealed top, however water may intrude into the bed via components that are not part of the cover such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof. Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed and the canister box. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.
Is the cover hard to install? How long will installation take? The installation of the Bedlocker is relatively easy. The most time consuming part of the installation is the running of the wire harness down the frame rail of the truck. As for the electrical part you will just be connecting the positive (red) wire and the negative (black) wire directly to the battery. Installation should take under 1 hour for the professional and 1½-2 hours for a first time installer. See the installation tab for addtional information
How does the Bedlocker lock? The Bedlockers electromagnetic brake system locks the cover automatically in any position.
Will the cover improve my gas mileage? How? Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. See below the attached PDF of the press release information on gas mileage savings. Input from customers and our own experience bear out the accuracy of this claim.
Will the cover work with my bedliner? The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See below the attached Bedliner Modification sheet.
Is there a warranty on the Bedlocker? Yes, there is a three-year factory defect warranty on all parts. See Pace-Edwards Warranty information for complete details.
What do I do if I accidentally get caught between the blanket and the tailgate? The controller is programmed to not set the brake for 5 seconds after the blanket comes to a stop. This 5 second pause will give you time to push the cover away enough to eliminate pinching yourself. (You will need to push very hard to move it).
How much weight will my cover hold, can I walk on it? Your BedLocker is not weight rated for load carrying. It is able to hold a substantial amount of weight especially if it’s evenly distributed such as a snow load. If you would like to carry something above your cover please see our ExplorerSeries Rails and Racks.
Can a garage door opener operate my cover? The BedLocker uses a rolling code to secure your cover. This gives you approximately 7 million random codes that change each time you push the button. It would be unlikely that a random garage door opener could open your cover.
Does my engine have to be running to operate the cover? No your cover will operate on battery only however, you will notice that it does run slightly faster with the engine running. The controller will not operate if the amperage draw falls below 10.5 amps. This will still allow you to crank the engine.
Is a cab-mounted toggle switch available? Yes, you can purchase a toggle switch kit that plugs directly into the controllers extra pigtail which will allow you to operate the cover with the flick of a switch.
Bedlocker Care and Maintenance: After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister. To help keep the Bedlocker retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However due to the hammer texture, removal of wax can be difficult so you should not wax your cover.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
By having a Pace-Edward Cover on your truck the average increase in fuel economy is 11%. Listed below are the covers manufactured by Pace-Edwards Company. The originators of the hard retracting truck bed cover. For additional information, please call 7-days a week 1-877-216-5446 or 701-253-5906 or email cs@realtruck.com
*Optional equipment. See application guide.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
| --Roll Top Cover-- | --JackRabbit-- | --BedLocker-- | ||
| Exposed aluminum slat blanket | No | No | Yes | |
| Padded polymer blanket | Yes | Yes | No | |
| Electric w/ remote control | No | No | Yes | |
| Electromagnetic brake | No | No | Yes | |
| Multiple latching/locking positions | Yes | Yes | Yes | |
| Independent latch & lock mechanism | No | Yes | N/A | |
| Lock Cover | Yes | Yes | Yes | |
| Pull strap | Yes* | Yes | N/A | |
| No-drill installation | Yes* | Yes | Yes | |
| Self-leveling clamps | Yes* | Yes | Yes | |
| Low profile, aerodynamic design | No | Yes | Yes | |
| Textured powder-coat finish | No | Yes | Yes | |
| Smooth powder-coat finish | Yes | No | No | |
| Installation time | 1hr | 1hr | 1hr | |
| (approximate average) | ||||
| UPS shippable | Yes | Yes | Yes | |
| Warranty | 1yr | 1yr | 1yr | |
| Number of available applications | 80 | 59 | 60 | |
| Number of available SKUs | 33 | 28 | 28 |
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
The Bedlocker Cover comes standard as a no drill installation (most models) and it can generally be installed in about 90 minutes. Below are PDF's of the owners manual and supplemental instructions for special applications or info you have a bedliner. For additional information, please call 7-days a week 1-877-216-5446 or 701-253-5906 or email: cs@realtruck.com
Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
|
BedLocker Drawing Detail Made of strong heavy gauge rigid aluminum panels with a durable, tough, high quality textured black powder-coat finish. Patented silicon weather hinge provides a tight seal between the aluminum Panels. The cover glides smoothly along black powder-coated side rails |
|
Electromagnetic brake Electromagnetic brake: Allows you to lock the cover in any position for added flexibility |
 |
Optional ExplorerRails w/Thule Optional Explorer Series Rails: The Bed locker retractable hard tonneau is also available with optional Explorer Series Rails. |
Backed by Pace-Edwards full 3-year warranty.
