Home > Performance > Performance Chips & Programmers > Chips & Programmers > Edge Products EVOLUTION Performance Engine Chip Programmers
| Edge Products EVOLUTION Performance Engine Chip Programmers |  |
28 Reviews
|
|
||||||
|
|||||||||||||||||||||||||||||||||||||
Manufacturer Information View all Edge Products products View available Products for this Product Line |
Edge Evolution programmer is available as a programmer only, programmer with attitude in cab monitor and the all NEW attitude in cab monitor programmer. (the attitude monitor is the programmer). The Edge performance evolution for gas and diesel engine performance. Contained in this compact module is the next generation of performance technology. The Edge evolution programmer can improve drivability and deliver substantial horsepower and torque gains. The Evolution programmer by Edge has three power levels designed to fit your specific needs, whether it be towing or all out performance. There is even an option to improve the shift characteristics without changing engine performance. The Evolution will also display 0-60 and quarter mile times for before-and-after performance testing. The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up. The modified transmission strategies will not only improve the feel and performance of the shifting, but can also help extend the life of the transmission. The Evolution connects directly into the OBDII port underneath the dash. Once connected, the stock software is downloaded and the new Evolution software is uploaded onto the truck¹s ECM. All modifications are done during this process and can be just as easily switched back to stock at any time.
- Edge Evolution has 3 Separate Performance Programs: Transmission Only, Tow Performance & High Performance Programs
- Offers additional Horse Power & Torque Gains. (See Specifications Tab for specific vehicle information). Examples: Ford 1997 - 2003 F-150 Gains of 15 Horsepower and 25 ft. lbs. of torque. 1994-2003 Powerstroke 7.3L Edge Gains of 60-100 Horsepower. Ford 2004-2006 F-150 Gains of 35 Horsepower and 50 ft. lbs. of torque
- Enhances Towing Performance and Improves Throttle Response. Ability to adjust speed and rev limiter. Displays and clears trouble codes. Adjusts for tire size and gear ratio. Displays 0-60 and Quarter mile times.
- Greatly improves drivability and potential improved fuel economy (depending on how you drive)
- 10 Minute Quick and Simple Plug and Play Installation. (See Installation Tab)
- Works with Attitude In Cab Monitor: Adjustable color display, 16 second program time, Dashpod included and Live Data Stream. Ships with a custom designed mounting pod. The F-150 pod was specifically designed to look like it was factory installed. Plus, the Evolution screen can be adjusted to any color you choose. USB updatable over the internet The Evolution comes USB ready so it can be updated over the internet for the latest tunes and advances features.
- Sleek Design stays with the vehicle as a state-of-the-art gauge display: The Evolution can display up to four of 19 different parameters at a time in an easy to read format. The Evolution monitors vital engine data such as engine load, engine oil temp, coolant temp and transmission fluid temp, just to name a few.
- Programs in Under 20 Seconds: The Evolution programmer is the fastest on the market with programming times under 20 seconds.
- Display and Clear Diagnostic Trouble Codes: Works as a diagnostics tool to display and clear trouble codes with full code description. Advanced tuning options Adjusts speed and rev limiter shift points and pressure improves throttle response WOT fuel and octane rating adjust tire size and gear ratio for proper shifting
- Performance Testing Features: Performs 0-60, quarter mile, eighth mile and 60 foot performance tests and reaction times as well as displays MPH, time and distance. Hook up to your PC and you can even view estimated flywheel horsepower and quarter mile times.
- Datastream: Choose up to five of 19 different user defined parameters at a time to graph up to 60 seconds worth of streaming data on your PC.
- Safety Alerts: Sounds audible alert when user set values are reached and automatically records the highest value of key parameters.
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
| Evolution Engine Programmers & Engine Turners | |
 |
EEF1000 Ford 7.3L Diesel Programmer only is available for the Ford 7.3L Diesels. The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily be switched back to stock at any time. |
 |
EEF1120 Ford 7.3L Diesel New is the Evolution incab monitor which is also the programmer. Designed specifically for the Ford 7.3L Power Stroke Diesel. |
 |
EEF2100 Evolution w/ Attitude Evolution Programmer with Attitude In Cab Monitor: Adjustable color display, 16 second program time, Dashpod included and Live Data Stream. Ships with a custom designed mounting pod. The F-150 pod was specifically designed to look like it was factory installed. |
 |
Evolution Programmer Only The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up. Available for F150 97-03 and Ford 7.3L & 6.0L Diesels |
 |
EEF2200 Ford 6.0L Diesels Programmer only is available for the Ford 6.0L Diesels |
 |
EEF2000 Ford F150 97-03 Programmer available only for the Ford F150 97-03 Triton V8 Gas Engines |
 |
7.3L Diesel Dyno Horse Power Up to an additional 60-100 horse power gains. (depending on program) |
 |
7.3L Diesel Dyno Torque Up to an additional 80 to 190 foot pounds of torque (depending on program) |
 |
EEF2400 Ford F150 04-06 Evolution with attitude in cab controller easily mounts to dash for the Ford F150 2004-2006 |
 |
EEF2400 Attitude Mount Detail The evolution with attitude in cab controller allows you to make changes on the go and installs on dash. |
 |
Evolution w/ Attitude Monitor Evolution Programmer with Attitude In Cab Monitor: Adjustable color display, 16 second program time, Dashpod included and Live Data Stream. Ships with a custom designed mounting pod. The F-150 pod was specifically designed to look like it was factory installed. Plus, the Evolution screen can be adjusted to any color you choose. USB updatable over the internet The Evolution comes USB ready so it can be updated over the internet for the latest tunes and advances features. |
 |
EEF1200-1220 Ford 6.0 PowerStock New is the Evolution incab monitor which is also the programmer. Designed specifically for the Ford 6.0L Power Stroke Diesel. |
 |
EEC1000 Chev 6.6 Duramax New is the Evolution incab monitor which is also the programmer. Designed specifically for the Chevrolet & GMC 6.6L Duramax 2006-2007. |
 |
EEF2100 Attitude on Dash OE Look Attitude incab monitor and controller. |
 |
EEF2100 Ford F150 97-03 Evolution with attitude in cab controller easily mounts to dash for the Ford F150 1997-2003 |
 |
EEC2200 Chevy 2007 Gas Engines New is the Evolution incab monitor which is also the programmer. GAINS OF UP TO 40 HORSEPOWER AND 40 FT. LBS. OF TORQUE The Evolution provides 4 power levels designed to extract the most performance from the fuel you are using. These levels include: TRANS ONLY - FUEL ECONOMY - TOWING - EXTREME |
 |
35060 Dodge 07 hemi installed Up to 35 horse power and 70 ft lbs of torque with 4 adjustable power levels. Comes complete with custom dash pod. |
Attached below are answers to frequently asked questions about the Evolution Programmers. For additional assistance, please call 7 days a week 1-877-216-5446 or 701-253-5906
AFTERMARKET PRODUCTS AND YOUR VEHICLE’S WARRANTY
Many of our customers ask, “Will your product void my vehicle manufacturer’s warranty?” While the answer is straightforward from a legal standpoint, we also want to educate our customers (and after-market consumers) on some industry realities and offer some common sense precautions to minimize your risk. Consumers of aftermarket products are protected by The Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your car and you take it in for warranty repair, the dealer must honor your warranty unless they can prove that whatever modifications you have added to your car actually caused the problem. Please keep in mind that towing in anything higher than level two and hard driving in levels four and five are not recommended. While as a consumer, you have strong legal protection with regards to your vehicle’s warranty, there is also a practical reality that different automotive manufacturers and dealers have greatly varying views on aftermarket products, in particular those that produce horsepower, such as performance enhancement chips, modified intake manifolds, or aftermarket exhaust systems. There are dealers and manufacturers out there that will use the presence of a horsepower upgrade to void your vehicle’s warranty. They will do this regardless of whose product you are using. Any aftermarket company that does not acknowledge this is misleading you. The bottom line is that while the law protects the consumer and provides
for enforcement of the warranty, it is very difficult for most people to hire an attorney and fight a voided warranty. Edge recommends that you always disconnect and remove your module and monitor when you take your vehicle to a dealer for warranty work in order not to interfere with
Diagnostic equipment.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
AFTERMARKET PRODUCTS AND YOUR VEHICLE’S WARRANTY
Many of our customers ask, “Will your product void my vehicle manufacturer’s warranty?” While the answer is straightforward from a legal standpoint, we also want to educate our customers (and after-market consumers) on some industry realities and offer some common sense precautions to minimize your risk. Consumers of aftermarket products are protected by The Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your car and you take it in for warranty repair, the dealer must honor your warranty unless they can prove that whatever modifications you have added to your car actually caused the problem. Please keep in mind that towing in anything higher than level two and hard driving in levels four and five are not recommended. While as a consumer, you have strong legal protection with regards to your vehicle’s warranty, there is also a practical reality that different automotive manufacturers and dealers have greatly varying views on aftermarket products, in particular those that produce horsepower, such as performance enhancement chips, modified intake manifolds, or aftermarket exhaust systems. There are dealers and manufacturers out there that will use the presence of a horsepower upgrade to void your vehicle’s warranty. They will do this regardless of whose product you are using. Any aftermarket company that does not acknowledge this is misleading you. The bottom line is that while the law protects the consumer and provides
for enforcement of the warranty, it is very difficult for most people to hire an attorney and fight a voided warranty. Edge recommends that you always disconnect and remove your module and monitor when you take your vehicle to a dealer for warranty work in order not to interfere with
Diagnostic equipment.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
Attached below is a PDF of the performance specifications. For addtional information, please call 7-days a week 1-877-216-5446 or 701-253-5906.
Evolution Specs for the Ford 7.3L Diesel
- Up to an additional 12% HP gains - Up to 15% gains in FT pounds of torque - Adjusts speed and rev limiter & Improves throttle response - Adjusts for tire size and gear ratio - Displays and clears trouble codes with full code description Not only can you view and fix trouble codes your vehicle may be displaying, but you can also turn off that annoying ³Check Engine² light when the problem has been addressed. - Displays 0-60 and quarter mile times - 10 minute installation - No tools required * While the Evolution can significantly improve overall vehicle drivability and towing performance, it does not in any way increase the maximum towing capacity of a vehicle. Please refer to your Owner¹s Manual for more information on the maximum towing capacity for your vehicle.
**Legal in California only for racing vehicles, which may never be used upon a highway.
Evolution Specs for the Ford 7.3L Diesel
- 3 Separate Performance Programs
- Adjusts Speed & Rev Limited
- Up to an additional 60-100 Horsepower Gains & 80-190 foot lbs of torgue
- Improves throttle response
- Adjusts for tire size and gear ratio
- Displays & Clears Trouble Codes
- Displays 0-60 and Quarter Mile Times
- 10 minute installation with no tools required
- 3 Separate Performance Programs
- Adjusts Speed & Rev Limited
- Up to an additional 60-100 Horsepower Gains & 80-190 foot lbs of torque
- Improves throttle response
- Adjusts for tire size and gear ratio
- Displays & Clears Trouble Codes
- Displays 0-60 and Quarter Mile Times
- 10 minute installation with no tools required
- 3 Separate Performance Programs
- Adjusts Speed & Rev Limited
- Up to an additional 12% Horsepower Gains
- Up to an additional 15 foot lbs of Torque
- Improves throttle response
- Adjusts for tire size and gear ratio
- Displays & Clears Trouble Codes
- Displays 0-60 and Quarter Mile Times
- 10 minute installation with no tools required
- Up to an additional 12% HP gains - Up to 15% gains in FT pounds of torque - Adjusts speed and rev limiter & Improves throttle response - Adjusts for tire size and gear ratio - Displays and clears trouble codes with full code description Not only can you view and fix trouble codes your vehicle may be displaying, but you can also turn off that annoying ³Check Engine² light when the problem has been addressed. - Displays 0-60 and quarter mile times - 10 minute installation - No tools required * While the Evolution can significantly improve overall vehicle drivability and towing performance, it does not in any way increase the maximum towing capacity of a vehicle. Please refer to your Owner¹s Manual for more information on the maximum towing capacity for your vehicle.
**Legal in California only for racing vehicles, which may never be used upon a highway.
Attached below are installation instructions for the Evolution programmer. Easy plug and play installation. For additional assistance, please call 7 days a week 1-877-216-5446 or 701-253-5906
Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
|
Easy Installation The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily be switched back to stock at any time. |
|
Evolution w/ Attitude Evolution Programmer with Attitude In Cab Monitor: Adjustable color display, 16 second program time, Dashpod included and Live Data Stream. Ships with a custom designed mounting pod. The F-150 pod was specifically designed to look like it was factory installed. Plus, the Evolution screen can be adjusted to any color you choose. USB updateable over the internet The Evolution comes USB ready so it can be updated over the internet for the latest tunes and advances features. |
|
Attitude Controller Mounting Evolution with attitude in cab controller easily mounts to dash for Ford F150 |
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
|
Easy Installation The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily be switched back to stock at any time. |
|
7.3L Diesel Dyno Horse Power Up to an additional 60-100 horse power gains. (depending on program) |
|
7.3L Diesel Dyno Torque Up to an additional 80 to 190 foot pounds of torque (depending on program) |
|
Evolution Programmer The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up |
