Roll N Lock E-Series Electric Tonneau Cover

Roll N Lock E-Series Electric Tonneau Cover Specifications

This high quality cover is constructed of marine grade bi-laminate vinyl over .040 gauge interlocking aluminum slats.  The hinged housing allows easy access to the housing for quick inspection or routine maintenance.  The Roll N Lock E Series Tonneau cover offers the smallest housing in the category, measuring only 6.25”, 7.25” or 8.25” deep, depending on the application.

Roll N Lock E-Series Electric Tonneau Cover Warranty

ROLL-N-LOCK® Corporation
One Year Limited Warranty
This limited warranty is extended by ROLL-N-LOCK® Corporation, a Florida corporation, with its principal office at 9l5 S. Dixie Highway, E., Pompano Beach, Florida, to the original purchaser of a ROLL-N-LOCK® retractable truck bed cover. ROLL-N-LOCK® Corporation warrants its product to be free from manufacturer's defects for a period of one year from the date of purchase. During this period, ROLL-N-LOCK® Corporation, through its authorized dealer, will repair or replace at no expense to the limited warranty holder, any part found to be defective as a result of the manufacturing process. (See HOW TO MAKE A CLAIM, below) ROLL-N-LOCK® Corporation does not warrant against defects resulting from improper installations, misuse, abuse, accidents, product modifications, negligence or deterioration of the finish due to improper maintenance or exposure to chemicals and/or other unusual environmental conditions. This warranty does not extend in any respect to accessories or parts not produced by ROLL-N-LOCK® Corporation and shall not extend to any consequential or incidental damages. This warranty isexpressly in lieu of all other warranties expressed or implied, including the warranties of merchantability and fitness for a particular purpose and of all other obligations or liabilities on the part of ROLL-N-LOCK®. ROLL-N-LOCK® neither assumes nor authorizes any other person to assume for it any other liability in connection with the sale of its product. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limits on implied warranties, therefore the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
How To Make a Claim:  To make a claim under this warranty, the party claiming must notify the dealer from whom the product was purchased of the defect or malfunction (you may call ROLL-N-LOCK® Corporation direct if you require any assistance, at 1-800-952-7655). The dealer will inspect the product and consult ROLL-N-LOCK® Corporation to determine if same falls under the warranty. If the defect is determined by ROLL-N-LOCK® Corporation to be covered by its warranty, ROLL-N-LOCK® will immediately send, at no cost to the warranty holder (including freight expense within the continental U.S.A.), the replacement part or parts necessary to correct the defect. If the problem is determined to be caused by improper installation the dealer, in accordance with his obligation to adhere to ROLL-N-LOCK® 's authorized dealer warranty policy, will immediately rectify the problem. If you have purchased your ROLL-N-LOCK® product through a mail order firm or any other outlet which excluded the service of installation and have performed the installation on a do-it-yourself basis, your warranty coverage will be limited to parts only. To make a claim as a do-it-yourself installer you may, at ROLL-N-LOCK® 's option, be required to return the defective parts, properly packaged and at your expense to ROLL-N-LOCK® Corporation warranty department at the address below (please include product I.D. number and a brief description of the problem). If the part or parts are found to be defective, the replacement part or parts will be immediately returned to you at our expense (limited to the continental U.S.A.). ROLL-N-LOCK® Corporation maintains the highest possible standards of manufacturing and quality control. Accordingly, it expects its dealers to adhere to a similar standard when installing its product and upholding this warranty if you believe you have a defective ROLL-N-LOCK® product and encounter any difficulty obtaining satisfaction, please call ROLL-N-LOCK® customer service at 1-800-952-7655 or fax 1-954-943-3675. ROLL-N-LOCK® Corporation, Warranty Department 915 S. Dixie Highway East, Pompano Beach, FL 33060

Roll N Lock E-Series Electric Tonneau Cover Installation

Most models feature a clamp on no drill installation. The installation manual is clear cut and easy to read. For additional information, please click here for installation manuals by model. You may also call us toll free at 1-866-309-1907 or 701-253-5906.

Roll N Lock E-Series Electric Tonneau Cover Feature Images

	Built In Tailgate Lock: Keep your cargo secure with ROLL-N-LOCK®'s patented integral tailgate locking system. Our positive locking system secures your tailgate and truck bed cover simultaneously, for the most secure system offered by any truck bed cover application.
	Clamp On Installation: Install your ROLL-N-LOCK® truck bed cover with clamps! Our patented clamp-on track design makes the job simple and secure.
	Remote Operation: Handy Remote Transmitter allows you to open or close your cover at will.
	Easy Drainage: Two recessed drain fittings ensure rapid and complete drainage of unit housing.
	Finger Grip Insulator: For very sunny and hot climates, we have incorporated a finger insulator grip into our design, which allows the operator to grasp the handle without burning his or her fingertips.
	Flush Handles: Our handle mechanism does not protrude beyond the housing, thus allowing more useable cargo space immediately aft of the housing.
	HD Torsion Spring: ROLL-N-LOCK® uses a heavy-duty torsion spring, housed in a compact aluminum-tube reel, for the ultimate in strength and durability.
	Key Slot Locking Cover: To address the needs of our colder regions, we have developed a key slot cover to prevent water from entering the lock mechanism and freezing.
	Multiple Latching Positions: Just turn the low-profile thumb lever, and your ROLL-N-LOCK® truck bed cover slides open. A convenient integrated pull-strap allows you to draw the cover back towards you. As you do so, the ratchet-style locking mechanism latches in place at ¼, ½, and ¾, or totally closed positions. Simple!
	Easy Operation: With the use of the premium pull cover the cover can be locked in a variety of positions.
	Smallest Canister: The most compact all-aluminum housing in the industry allows more room for storage in the truck bed.
	Unique Construction Detail: Contoured design provides smooth frictionless rotation. In the rotated position, the locking flange functions as a positive stop, minimizing stress on the surface material. In the flat position, the locking flange traps the radius of the adjacent slat preventing disengagement when a surface load is applied.
	Unique Slat Construction: Our contoured design provides smooth frictionless rotation. In the rotated position, the locking flange functions as a positive stop, minimizing stress on the surface material. In the flat position, the locking flange traps the flange of the adjacent slat preventing disengagement when a surface load is applied.
	Versatile: The Roll-N-Lock truck bed cover is versatile for today's truck owners.
	Rugged and Durable Construction: The Roll N Lock opens and closes easily. With the help of the pull cover the cover can be locked in a variety of positions.