Snow Bear Polar Pro FlexBlade Snow Plows

Description

PolarPro Flex-blade snowplow by Snow Bear is a great addition for anybody that is tired of using a snow blower or shoveling snow by hand. The blade is 7 ft long and weights 290 lbs. It is also heavy-duty reinforced with polymer material, and comes with a tubular steel frame and hardware. Mounting and storing has never been easier. The snowplow mounts to a 2" front receiver hitch (sold separately) and the plow is easily mounted and stored with its two 8" rubber tires. The plow comes with a built in snow deflector to keep the snow off of your windshield. The PolarPro Flex-blade comes with a 1-year limited manufacturer's warranty.

Features

• Mounts to 2" Front Hitch:  The PolarPro Flex-blade mounts to any vehicle that has a class 3, 2" front mounted receiver hitch. (Sold Separately)
• Hand Held Remote:  Lift and drop the blade with an electric actuator operated by a hand held Wired Remote Control.  Optional wireless remote control sold separately.
• 7' x 20" Polymer Blade:  The blade is constructed out of a Lightweight, high Strength Red Polymer Blade.  7' wide & 20" tall
• 3 Position Blade:  The blade also has a full range of Angling with 3-Different positions to choose from.
• Easy On / Off Design:  Heavy-Duty adjustable rollers for Easy-On, Easy-Off plow removal. (two 8" bearing rubber tires)
• Scraper Blade Included: is made of heavy duty steel and has a black powder coat finish
• Snow Deflector Included: Deflector is include in the kit.
• Warranty Backed by Snow Bear:  The PolarPro Flex-blade comes with a 1-Year Manufacturer's Warranty.
• Optional Accessories: Skid Shoes and the Off-Road Light Kit (Sold Separately).

SnowBear Flexblade Brochure 7' Blade

Order Notes

Front Receiver Hitches are sold separately

Optional Accessories: Skid Shoes and the Off-Road Light Kit are sold separately.  Please allow 1-2 Days for Processing and 7-10 Days for Transit Time.

Not for Commerical Use.  Made for Personal Use Only..

Snow Bear Polar Pro FlexBlade Snow Plows Frequently Asked Questions

• Do I Need A Four-Wheel Drive Truck?  No, many SnowBear owners with two-wheel drive vehicles are very happy with their results. The plow clears the snow away before it gets to the tires. The more traction that your vehicle has, the more versatile the plow will be and the more snow it will be able to push. This is why four-wheel drive vehicles are usually preferred. SnowBear owners with two-wheel drive vehicles will find that adding weight in their vehicle helps them push through more snow. Less traction means that you need to plow more often and that you should not let the snow accumulate too much, especially if it is wet and heavy.
  
  
• Can I Install The Mount Myself? The SnowBear Personal Snowplow Mounting Harness is designed to be bolted on to the frame of the vehicle. No welding or drilling is required. The installation of the mounting harness will not be difficult for a person who has a set of tools and is comfortable using them to perform mechanical repairs on vehicles and houses. Vehicle dimensions are not always consistent, particularly if it has been involved in an accident. Where possible we have used slotted holes to allow for this, however, sometimes a bit of prying or twisting will be required. If the customer is uncomfortable, we recommend that the mount be installed by the licensed or certified mechanic who normally looks after the vehicle.
  
  
• How Long Does It Take to Install The Mounting Harness? Installation times vary among vehciles. A newer full-sized GM truck takes about 30 minutes. Other vehicles which need a more complicated mount may require two or three hours.  We normally allow two to three hours for an inexperienced installer and a typical mount.
  
  
• What If My Truck Is Not Listed On The Application Guide? First call SnowBear Customer Service (800-337-2327) to see if the mount that you require is already in production. If it is not you may order the SnowBear Professional Mount Kit. With this you will be required to fabricate some brackets and you should be willing to drill holes in your vehicle frame. The mount is only recommended for the advanced Do-It-Yourselfer.
  
  
• What If I Sell My Truck Next Year? You may still use your plow but you will need to order a new mount by calling our customer service department at 800-337-2327. If you own more than one truck, it is a good idea to order a mount for each vehicle.
  
  
•  Does The Plow Angle? Yes, a spring loaded release allows you to manually angle the blade. To reduce cost and complexity there are no hydraulic control systems on the plow for remote angling.How Does The Remote Control Work?The remote control is used to raise and lower the plow from within the vehicle. The 12ft. control can be temporarily mounted on your side window or permanently installed under the dash.
  
  

Snow Bear Polar Pro FlexBlade Snow Plows Specifications

• Assembled Plow Weight: 290 lbs.
• Dimensions (w x h): 7' x 20"
• Lift System: Electric actuator
• Angling: 3-Position Manual
• Control System: Wireless Remote
• Storage/Mounting Cart: Heavy-Duty adjustable rollers for Easy-On, Easy-Off plow removal. (tow 8" bearing rubber tires.
• Color/Finish: Red, polymer material
• Assembly: Quick-Time, Do-It-Yourself assembly
• Scraper: Premium black powder coat finish
• Snow Deflector: Included
• Packaging: 2 Boxed - first contains snowblade & blade hardware, second contains plow hardware, wiring and electric actuator
• Manual: Detailed owner's manual and full color "Quick-Start Guide" with photos and instructions
• Mounting System: Mounts on class 3 front mounted receiver

Snow Bear Polar Pro FlexBlade Snow Plows Installation

SnowBear Flexblade Owners Manual

Snow Bear Polar Pro FlexBlade Snow Plows Feature Images

	3-Positions Manual Angling: The PolarPro Flexblade has 3 manual positions to choose from. Lift and drop the blade with an electri actuator controlled by a wireless hand held remote.
	Mounts to 2" Hitch: The PolarPro Flexblade mounts to any vehicle that has a Class 3 2" mount receiver. Please note Front or Rear Receiver Hitches Sold Separately
	PolorPro Flexblade: The PolarPro Flexblade is constructed out of Heavy-Duty reinforced polymer blade, tubular stell frame hardware.
	Two Marker Blades: Each PolarPro Flexblade come standard with 2 red markers.
	Steel Scraper: Cut through the toughest ice and snow with the solid steel scraper.
	Optional Light Kit: The light kit allows you to plow anytime and offers greater visibility. They mount easily onto the plow frame.
	Optional Skid Shoes: You can get optional Skid Shoes to enhance your plow's performance over gravel, soft surfaces or uneven terrain. Choose from Heavy-Duty or Regular Skid Shoes.
	Optional Wireless Remote Control: Polar Pro comes with a wired remote control for easy operation. However, you can upgrade to an optional wireless remote control sold seperately.