SnowSport Snow Plows | ATV & UTV

Description

From the makers of the revolutionary SnowSport Utility Snow Plows, comes the most versatile and innovative utility plow made specifically for ATVs and UTVs. The SnowSport ATV / UTV plow Mounts to a 1.5" front receiver mount. The SnowSport ATV is motion activated which allows the blade to be pushed forward by the momentum of your ATV. The SnowSport ATV snowplow will move as much snow as your ATV can handle and it fits into those hard to reach places where your full size plow won't reach. Its lightweight design will turn your favorite toy into your most valuable tool. Versatility for home owners, contractors, farmers and business owners. The plow has a turf-friendly heavy-duty rubber cutting edge. Works great on cement, black top, gravel and won't damage grass surfaces. Attractive heavy-duty and lightweight clear anodized aluminum blade. No wiring or lever controls to clutter the handlebars of your ATV. The Utility Plows are available with or without ATV mount. Note: The angling interceptor fits into a 1.5" receiver hitch. Adapters are available to allow the interceptor to fit a 2" hitch.

Features

• ATV/UTV Plow: Includes Blade Assembly, Push Frame, Angling Interceptor, Installation Hardware and comes with or without 1.5" ATV receiver mount and easy step-by-step instructions.
• Easy To Use & Install: SnowSport ATV Plow is very simple to install, and easily attaches to a 1.5" front receiver mount. Easy to Use: Just attach the push frame to the hitch and put the blade in the transport position on the push frame. Lower the blade and you are ready to plow. Just drive forward to plow and let the blade do the work with the turf friendly heavy-duty rubber cutting edge. Then just back up your vehicle and the blade follows, leaving the snow right where you piled it. Drive forward again to plow some more. Easy To Maintain: SnowSport Personal ATV Utility Plow is very easy to maintain, as it has no electrical or hydraulic components to freeze, malfunction or wear out. Easy Hook Up: The Fast Attach Push Frame attaches to a 1.5" receiver mount and secures with a hitch pin. Then hang the SnowSport plow blade one end at a time onto the push frame (can be done in less than a minute). To plow, just lower the blade. To transport the plow just hang the plow blade on the top of the push frame. To remove completely, unhooking is just as easy. You can also leave the blade in the transport position on the push frame all winter long
• Aluminum Blade: Attractive lightweight yet heavy duty and rust proof extruded hardened Aluminum Blade.
• Single Point Connection: Attaches to ATV with 1-1/2" square shaft interceptor. No wiring or lever controls to freeze or malfunction.
• 5 Widths Available: Choose from 42", 48", 54", 60" or 72" wide blades. All blades are 14-1/2" High with 1" Thick rubber cutting edge. 42" Blade has 39" Angle Cut, 48" Blade has 45" Angle Cut, 54" Blade has 51-3/8" Angled Cut, 60" Blade has 57" Angled Cut, 72" Blade has 68-1/2" Angled Cut.
• HD Rubber Cutting Edge: Turf-friendly heavy-duty rubber cutting edge works great on cement, black top, gravel and won't damage grass surfaces. Pushes the snow but doesn't hurt the grass.
• 3 Position Plowing: The angling interceptor is the most popular and allows you to angle the plow for plowing long roads, sidewalks, or driveways. Angle Right, Angle Left or Straight on Plowing. Adjusts in seconds.
• Available with or without ATV mount:. The plow angling interceptor fits into a 1.5" receiver hitch. Hitch Adapters Part#: AG-50510 is available and sold separately to allow the interceptor to fit a 2" hitch.

SnowSport Snow Plows | ATV & UTV Frequently Asked Questions

1. How does the SnowSport Install to my ATV?  The SnowSport Utility Snow Plow Push Frame (which the Blade hans on) attaches to a 1.5" receiver hitch mount.  The push frame for the plow just hooks up like a ball mount. 
2. How difficult is it to assemble and install the snowsport snow plow?  The Snowsport Blade and Push Frame are easy to assemble and come with step by step instructions that fully explain assembly and installation.  Plan about 30 minutes depending on your mechanical skill. 
3. How difficult is it to install a front 1.5" ATV hitch mount?  The front end hitches are designed to bolt in place.  The instructions are clear cut. The front receiver hitch is mounted to the ATV and the push frame is plugged into the front receiver hitch. The plow simply hangs on the push frame.
4. Can I install the SnowSport ATV Plow myself?  YES, the instructions are very clear cut. If you do need assistance, call 1-877-216-5446 or 701-253-5906. Our customers overwhelmingly say "it was simple and easy to install".
5. How easy is the SnowSport Personal ATV Plow to hook-up or un-hook between jobs?  It's very easy. Just insert the push frame into the front receiver hitch and secure with pin. Then hang the blade one end at a time onto the push frame (can be done in less than a minute). Unhooking is just as easy.  You can also leave the blade in the transport position on the push frame all winter long.
6. How do you switch from transporting to plowing or from plowing to transporting?  The operator must manually unhook the plow and lower it for plowing. For transporting simply lift the blade, one side at a time, onto the push frame.  You can also leave the blade in the transport position on the push frame all winter long.
7. How can the SnowSport Personal ATV  Plow operate without hydraulics?  The blade is secured by the push frame. As you push the snow, the blade travels up and down as needed by gravity pushing the snow with the rubber cutting edge and aluminum blade. The rubber cutting edge is designed to cut through the snow but pass over the harder ground surfaces below and be gentle on grass. When you back up, the blade automatically lays back, skimming over the surface. Then you drive forward and the blade re-engages for plowing.
8. How well does the rubber cutting edge hold up?  The rubber cutting edge is 1" thick 6" high - made of a hard rubber compound. This has been tested and proven to provide years of service. It can be replaced relatively inexpensively.
9. What is the warranty?  The plow has a 1-year limited warranty. See the owner's manual for details.
10. Can I move the SnowSport from one ATV to another?  Yes, the plow can be easily transfered to another ATV, all you need is a front 1.5" receiver hitch installed on that ATV.   The plow angling interceptor fits into a 1.5" receiver hitch.  Hitch Adapters Part#: AG-50510 are available and sold separately to allow the interceptor to fit a 2" hitch.
11. How much does the plow weigh?  All together the plow, pushframe, and hitch weighs about 80-100 Pounds. (depending on model) 

SnowSport Snow Plows | ATV & UTV Warranty

SNOWSPORT PLOW MANUFACTURER’S LIMITED WARRANTY
Agri-Cover, Inc. extends the following limited warranty on its SNOWSPORT Plow to the original retail purchaser:  Agri-Cover, Inc. warrants its SNOWSPORT Plow to be free from defects in material and workmanship  under normal use for three (3) years from date of purchase.  ANY IMPLIED WARRANTY APPLICABLE TO THE SNOWSPORT PERSONAL UTILITY PLOW IS LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF PURCHASE. Agri-Cover’s sole obligation under this warranty or any implied warranty is limited to the repair or replacement at its option, of defective parts only. No labor or service allowance is given or implied. IN NO EVENT SHALL AGRI-COVER, INC. BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or exclusions of incidental or consequential damages, so the above limitations and exclusions may not apply to you.  To obtain part replacements under this warranty, contact the Customer Service Department of Agri-Cover, Inc. at the address shown below. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective. This warranty does not cover any failure due to abuse, misuse, alteration, neglect, improper assembly or installation, or improper maintenance.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Agri-Cover, Inc.
Customer Service Dept.
Hwy. 281 N., PO Box 508
Jamestown, ND 58402

SnowSport Snow Plows | ATV & UTV Installation

Easy at-home installation.  Instruction manual has easy to follow step by step instructions.  Please allow about 30 minutes for installation.Below you can view the owners and installation manual.  For installation questions, please call Monday to Saturday 1-877-216-5446 or 701-253-5906.  or email cs@realtruck.com 

SnowSport Snow Plows | ATV & UTV - How It Works

	How It Works Just Drive Forward and let the plow blade do the work. Then by backing up, the blade lays back skimming over the surface. Then drive forward, and the blade automatically re-engages for plowing.
	Just Drive Forward Remember, with the snowsport plow you are not bothered by controls.
	Let the Blade do the work It will follow up and down the terrain while you drive. The blade has been specifically designed to roll the snow up and forward to maximize capacity.
	Stiff Rubber Cutting Edge The heavy duty rubber cutting edge is rigid yet flexible, mike it turf friendly
	When Ready Just Back Up With your ATV in reverse the blade follows leaving the snow right where you piled it.
	SnowSport Animation The snowsport mount is very easy to install. The just attached it to the push frame and you are ready to plow. Once plowing the snowsport easily pushes snow and is very versatile.

SnowSport Snow Plows | ATV & UTV Feature Images

	5 Sizes Available: 3 Widths Available: Choose from 42", 48" 54", 60" or 72" wide blades. All blades are 14-1/2" High with 1" Thick rubber cutting edge. 54" Blade has 51-3/8" Angled Cut, 60" Blade has 57" Angled Cut, 72" Blade has 68-1/2" Angled Cut.
	Angle has 3 Postions: The ATV snow sport angle can be positions easily to 1 of 3 positions in seconds.
	Angle Top View: The ATV snow sport plow comes standard with angling interceptor. The 3 position angle can be used in the straight position or angled to the left or the right.
	ATV Mount: The 1.5" mount installs easily on your ATV. The angling push frame simply attached to the mount on the ATV with a quick pin. The snow sport plow blade then attached to the push frame. Please Note: ATV Mount is available with or without the Plow Package. The plow angling interceptor fits into a 1.5" receiver hitch. Hitch Adapters Part#: AG-50510 are available and sold separately to allow the interceptor to fit a 2" hitch.
	HD Rubber Cutting Edge: Turf friendly heavy-duty rubber cutting edge and rubber box ends work great on cement, black top, gravel and won't damage grass surfaces.
	How It Works: Just Drive Forward and let the plow blade do the work. Then by backing up, the blade lays back skimming over the surface. Then drive forward, and the blade automatically re-engages for plowing.
	Plows in hard to reach places: SnowSport ATV fits into those hard to reach places where your full size plow won't reach.
	Push Frame: Fast attach push frame slides into the 1.5" front ATV snowsport mount and secures with a quick pin. Please Note: ATV Mount available wiith or without plow package. The plow angling interceptor fits into a 1.5" receiver hitch. Hitch Adapters Part#: AG-50510 are available and sold separately to allow the interceptor to fit a 2" hitch.
	Safe On Grass: Plow blade is guided by push frame that allows it to slide up and down with the grade of the terrain. The thick rubber cutting edge moves snow but flexes over stationary objects.
	Skid Slide: The skid slides on the back on the rubber cutting edge allow the blade to float over the ground when backing up.
	Snap Pins: The SnowSport plow blade is easily lifted up and secured with snap pins on push frame for transporting.
	Turf Friendly: The ATV Snow Sport Snowplow has a heavy duty rubber cutting edge. This cutting edge moves snow and is also turf friendly.
	Works great for Landscaping: Snowsport ATV is not only for snow but also works great for all types of landscaping.
	Works on all terrains: Snowsports rubber cutting edge will not chip cement or tear up gravel or grass
	ATV in action: The SnowSport ATV is motion activated which allows the blade to be pushed forward by the momentum of your ATV
	Angle Load Capacity: 42" Blade has 39" Angled Cut, 48" Blade has 45" Angled Cut, 54" Blade has 51-3/8" Angled Cut, 60" Blade has 57" Angled Cut, 72" Blade has 68-1/2" Angled Cut. The plow angling interceptor fits into a 1.5" receiver hitch. Hitch Adapters Part#: AG-50510 are available and sold separately to allow the interceptor to fit a 2" hitch.
	SnowSport ATV Design: From the makers of the snowsport snowplow comes the most versatile and innovative utility plow made specifically for ATV's.
	SnowSport Animation: The snowsport mount is very easy to install. The just attached it to the push frame and you are ready to plow. Once plowing the snowsport easily pushes snow and is very versatile.