Browse By Brand / US Rack

The all new Rail Rack was designed to work with the Utility Rail Systems being offered on today's new trucks. It carries up to 400 lbs. and will work with the Toyota Tacoma and Tundra trucks that have the Deckrail system. The Rail Rack is also available for the Nissan Frontier and Tundra trucks with the Utili-track system. Since the load rests on top of the bedrails the weight cannot bear down on the tracks and damage them. The Rail Rack is made of sturdy tubular steel and consists of two sections. The front section supports a crossbar just behind the cab and the back section support ...

The Stake Pocket Utility Rack installs in minutes without drilling and fits any full-sized truck with stake pockets. Simply insert the high-density polyethylene wedges into the stake pockets, tighten the draw bolts, attach the legs, cross-bars, and side rails, and load your cargo! The rack is adjustable in width, and extra-large racks are available for trucks with long beds and extra-tall cabs. Adjustable cargo brackets on the cross-bars help secure loads. The ability to tie down cargo from eight different mounting points makes this the perfect choice for safely transporting ladders, lu ...

U.S. Rack offers the work truck owner a no drill alternative in truck bed rack systems. The Utility Rack from U.S. Rack installs in about five minutes, requires no drilling, and can hold up to 500 pounds of cargo. Made of zinc-plated, powder-coated steel, the Utility Rack adjusts to fit any pickup with ordinary bedrails. It expands to fit the truck bed, installs or un-installs quickly and easily using a superior clamping system as an alternative to drilling, and stores on the garage wall or in a portable storage bag when not in use. The Utility Rack also has padded components to protect the

The Lock and Load Ladder Carrier for commercial vans helps lift ladders safely into place to prevent theft or loss on the highway. The ladder rack pivots down to allow users to safely and easily attach the ladder from the ground. Users can store and secure the ladder from the side of the van, then reposition the carrier on top of the van roof. The carrier is made of heavy gauge steel, clamps to the roof rain gutters and installs without drilling. The carrier is configured with one or two pairs of lifting arms connected by a common handle which can be mounted on one or both sides of the ...

U.S. Rack now offers the 3-Ladder Rack, the only side mounted ladder rack that carries three unstacked ladders. The 3 Ladder Rack offers pickup owners a sturdy alternative in side mounted ladder rack systems. The 3-Ladder Rack mounts securely to the bedrail without drilling, using an integrated clamping system. One small (3/8-inch) hole must be drilled in the bottom of the truck bed to secure each base. Made of black powder-coated steel, the 3-Ladder Rack adjusts in height to fit any pickup with conventional bedrails (except the Pre-2004 Ford Supercrew) and installs quickly and easily ...

The US Rack Truck Topper Canopy Rack is designed to safely carry up to 250 lbs of cargo on truck toppers. It fits any canopy that is at least 52 inches long and has a generally flat roof. The sturdy side rails easily secure cargo, and metal loops integrated into the rails make tying cargo down efficient and easy. The mounting feet are adjustable to allow users to properly position them during installation. Some drilling is required to install the mounting feet, but the rack frame may be mounted or removed in one piece in less than 5 minutes. Rubber gasket pads under the mounting feet pr ...

The Roller Ladder Rack consists of two independent sections mounted on one side of the truck bed. One section has a roller which allows a heavy ladder or other cargo to be pushed easily up onto the cross-bar. This cross-bar also pivots so that once it is balanced it can rotate until one end of the ladder can be placed on the other cross-bar. When loaded, the ladder no longer rests on the roller. It instead rests on a stationary pad that prevents the cargo from shifting or moving. Removable side bars clamp the ladder securely in place without the use of ropes or straps and the ladder c ...

The Hawaiian Sawhorse Rack installs in about five minutes without drilling and can hold up to 300 pounds of cargo making it perfect for transporting lumber, ladders, plywood, canoes, kayaks or other cargo. This utility rack consists of all necessary structural metal components that attach to a 2x4 or 2x6 wooden “cross-bar” supplied by the customer. These cargo racks assemble to make a sturdy rack that can be made to fit almost any pickup. Once assembled, the utility rack installs in less than 5 minutes using an integrated clamping system. It can later be quickly removed and ...

The Strong-Ender Side-Mounted Ladder Rack is built for strength and stability. It installs in about five minutes and can hold up to 250 pounds of cargo, making it perfect for transporting ladders, lumber, pipe, or other long articles. Made of black, powder-coated steel, this side mounted ladder rack adjusts to fit almost any pickup and installs quickly and easily using a superior mounting system. Two heavy-duty adjustable receiver tubes are mounted with bolts to the inside the bed just below the level of the bedrails. Unlike other racks, the Strong Ender features both a fronting plate and a