Description
The US Rack Truck Topper Canopy Rack is designed to safely carry up to 250 lbs of cargo on truck toppers. The camper shell truck rack fits any canopy that is at least 52 inches long and has a generally flat roof. The sturdy side rails easily secure cargo, and metal loops integrated into the rails make tying cargo down efficient and easy. The mounting feet are adjustable to allow users to properly position them during installation. Some drilling is required to install the mounting feet, but the rack frame may be mounted or removed in one piece in less than 5 minutes. Rubber gasket pads under the mounting feet prevent moisture or dust leakage into the canopy. The U.S Rack Truck Topper Canopy Rack has a maximum distributed load capacity of 250 pounds, however it is not recommended to exceed the topper cap's maximum load rating.
Features
- Fits Most Truck Bed Canopies: The Canopy Rack will fit any generally flat cap that is at least 52 inches long.
- High Carrying Capacity: The Canopy Rack carries up to 250 lbs of cargo when evenly distributed.
- Secure Cargo Storage: 5-inch high rails prevent load shifting, and metal loops integrated into the rails make it easy to tie down cargo.
- Rugged Construction: The Canopy Rack is constructed of high grade steel and given a durable black powder coat finish. All threaded parts are stainless steel.
- Adjustable Feet: The Canopy Rack has adjustable feet that are adjustable over the width of the rack. This allows users to shift the feet to attain the proper clearence with the contour of the topper roof.
- Secure Installation: The feet permanently bolt to the roof of canopy, while rubber gasket pads create a water tight seal.
- Fast and Easy Installation: The topper rack can easily be installed or removed in under 5 minutes.
US Rack Truck Topper Canopy Racks Warranty
U.S. U.S. Rack™ products are warranted for a period of one year against all structural defects in materials and workmanship provided that they are assembled, installed, and used in accordance with all manufacturer’s specifications and instructions. U.S. Rack
cannot warrant the powder-coating on its products. Normal use of any powder-coated rack and exposure to weather can result in scratching of the surface, exposing metal below; therefore,
maintenance on your rack will be required. To prevent rust, spot paint any scratches or breaks in the surface with a high quality metal paint.
US Rack Truck Topper Canopy Racks Installation
This product offers an easy, at home installation. The installation manual is clear cut and easy to read. For additional information, please see the installation manual below. You may also call us toll free at 1-866-309-1907 or 701-253-5906.
US Rack Truck Topper Canopy Racks Feature Images
| Fits Any Canopy: The US Rack Truck Topper Canopy Rack fits any flat canopy that is at least 52 inches long and has a relatively flat conture (close to the contour of the truck cab) |
| 5 Inch High Side Rails: The U.S. Rack Truck Topper Rack features 5 inch high side rails that ensure your cargo wont slide or shift. |
| Black Powder Coat Finish: The US Rack Truck Topper Rack is constructed of high grade black powder coated steel. It also features integrated loops that allow users to use either ropes or straps to tie down cargo. |
| Easily Transports Long and Heavy Cargo: The U.S. Rack Canopy Rack can carry a maximum distributed load of 250 lbs allowing users to carry all the needed supplies to the jobsite. |
US Rack Truck Topper Canopy Racks Customer Reviews
| Customer Rating |
Product |
     |
3/5 for USR-2002-1R - US Rack Pickup Truck Canopy Rack- Black Powder Coat
Posted By:Agustin S. (San Jose, CA) on 10/2009
The canopy rack was what I was looking for, the quality is acceptable and ease of installation went fine. With the exception of the 4 bolts missing to secure the canopy rack to the mounting brackets. This situation created an extra trip to the store.
|
     |
4/5 for USR-2002-1L - US Rack Pickup Truck Canopy Rack- Black Powder Coat
Posted By:Jim H. (Carson City, NV) on 09/2009
The installation was fairly easy, although I did have to use a ratchet tye-down to square up the rack prior to fastening. Also, I'm just a little disappointed that it doesn't have greater separation off the canopy lid. Adjustments have had to be made to accomodate the load that I carry (a Canoe), but overall its function is great. The design is sleek and not cumbersome like other racks which was the primary attraction for me. I would recommend this canopy rack to anyone who will be transporting long or awkward loads such as a canoe or extension ladders to everyone.
|
     |
4/5 for USR-2002-1R - US Rack Pickup Truck Canopy Rack- Black Powder Coat
Posted By:Jason T. (Norwalk, CT) on 08/2009
Good strong product. Heavy duty steel. Didn't take long to assemble. Only issue I had was that the stainless steel bolts that came with the rack were not long enough to go though the fiberglass cap on my truck. They were only 1 1/2". I had to go buy new 2" bolts. Other than that. It's a great deal.
Also, this rack is 5 feet long. If you have a 6 foot bed, and 6 feet of space on the roof of your cap, consider buying the 72" long rack. As mine is now, I have over 6" of space both in the front and rear of the rack, it being centered on the cap. Buying the 72" might be worth the extra money if you carry a lot of longer stuff, and/or would be annoyed by seeing unused roof space by the rack.
|
US Rack Truck Topper Canopy Racks has an average rating of
3.5
with 3 reviews.