Al's Liner Rubber Crumb Additive ALS-RC
- Provides A Non-Skid Surface
- Non-Abrasive to Skin
- Made Out Of Recycled Products
- Contains 1 Quart
- Must Be Applied with Al's Liner Protective Coating
Al's Liner rubber crumb additives are intended for areas where extra non-skid protection is needed. Whether you are coating your truck bed, a deck, walkway, or boat with Al's Liner, this additive will provide an aggressive texture that will ensure extra traction even on wet surfaces. Al's Liner rubber crumbs are soft and pliable to ensure they are easy on your hands and needs, making them a much better alternative than quartz or sand. The Al's Liners rubber crumb additive is sold in quart sizes (recommended for 1 gallon of protective coating) and offers easy flow and spray pattern through the Al's Liner spray gun. Made by Al's Liner.View Available Part Numbers For This Product Line
InstallationAl's Liner rubber crumb additive is easily applied. Simpy mix with AL's Liner spray on truck bed liner and spray. There is an installation manual that is sent with the product which offers clear cut and easy to read instructions. For additional information please call us at 1-866-309-1907 or 701-253-5906.
Limited Lifetime Warranty
Al's Liner is offering a limited lifetime warranty on the rubber crumb additive.
Product Reviews Summary
|Price / Value||4.0|
|Ease of Installation||4.0|
|2 Customer Reviews|
Part #: SPC-ALS-RC Posted on
|I had an issue with my first batch of Al's Liner Kit and the Rubber Crumb Additive. No where on the manufacturer's website or in the provided literature does it explain the proper mix ratio of this product to the liner kit. |
My experience was that I wanted a matte finish with the liner when I was finished, so I purchased another additive called Al's Liner Vinyl Flattener Additive. According to the manufacturer's directions I added all of the vinyl flattener and all of the rubber crumb into the liner mix. BAD IDEA! the mixture was as thick as tar. It quickly turned into a hard rubber substance in the spray gun hopper that was unable to be sprayed.
I called Al's Liner and spoke with a company technician. He told me that I would have been okay putting in all of the Rubber Crumb Additive by itself (OR) all of the Vinyl Flattener Additive by itself (BUT) never mix all of both additives together with the liner or you will harden too quickly. I urged him to include that little bit of needed trivia to their literature.
I solved the problem of over hardening by only adding a 1/4 of the container into my next batch, which I was able to spray, but really did not notice any significant effect from the Rubber Crumb.
|I added this to the Al's DIY kit that I sprayed because I was hoping that the texture would help hide any imperfections of the material I was applying it too. Not only did the rubber crumb hide any imperfections but it also went through Al's Spray Gun perfectly. Follow the directions and you can't go wrong.|