- KEY FEATURES: - Up to 40 HP and 38 ft. lbs. of torque - Installs in minutes with no tools needed - Includes a custom pod that makes the unit look factory installed - Choose from four different power levels and display a host of vehicle parameters - Internet updatable - Adjustable color screen
- CARB certified: 50-state street legal (EO #D-541-4)
2007-2008 Chevy/GM Evolution Performance Chip - New Body Style Only
View Available Part Numbers For This Product Line
- Up to 40 HP and 38 ft. lbs. of torque
- Installs in minutes with no tools needed
- Includes a custom pod that makes the unit look factory installed
- Choose from 4 different power levels and display a host of vehicle parameters
- Internet updatable
- Adjustable color screen
- ECT (Engine Coolant Temp)
- TFT (Trans Fluid Temp)
- EOT (Engine Oil Temp)
- IAT (Intake Air Temp)
- SPARK (Spark Advance)
- MAF (Mass Air Flow)
- BARO (Barometric Pressure)
- MAP (Manifold Absolute Pressure)
- AAT (Ambient Air Temp)
- BATT (Battery Voltage)
- DIDL (Desired Idle)
- APP (Applied Pedal Position)
- EOP (Engine Oil Pressure)
- AFC (Air Flow Calculated)
- FUEL (Fuel Tank Remaining)
- LOOP (Loop Status)
- POWER (Power Enrichment)
- GEAR (Current Gear)
- AFP (Alcohol Fuel Percentage)
- DCYL (Deactivated Cylinders)
- DCD (Distance Cylinders Deactivated)
- DCA (Distance Cylinders Activated)
- ¼ mile
Features are limited on the 6-speed transmission. Product does not adjust transmission parameters and allow custom settings.
*Edge Mount PODs MAY NEED TO BE PAINTED TO MATCH COLOR OF INTERIOR.
*All programmers for an 07+ Chevrolet or GMC are shipped with Mount Pods for the Standard Dash. If you have the Luxury Dash, you must purchase the Mount Pod seperately. The Standard Dash has vertical air vents while the Luxury Dash has horizontal air vents.
California Air Resources Board Executive Order D-541-4
This product meets the emissions compliance requirements of the California Air Resources Board and Federal Environmental Protection Agency and is legal for sale and use on pollution-controlled vehicles operated on public streets and highways. It must be installed and operated according to the instructions provided.
The Evolution programmer has the ability to remove/adjust your vehicle's factory speed limiter. Improper use of this feature could result in a serious or fatal accident. Removal/adjustment of the factory speed limiter is intended for use in a closed circuit, legally sanctioned racing environment. Even if racing in a legally sanctioned racing environment, it is your responsibility to ensure your tires and other vehicle components are rated to travel at increased speeds with the speed limiter removed/adjusted. If you remove/adjust the speed limiter during highway driving, it is your responsibility to obey all driving laws, including adhering to posted speed limits.
Removing/adjusting the speed limiter for purposes inconsistent with the product's intended function, as stated herein, is a violation of the product's intended use and invalidates the product's warranty. Edge Products is not responsible for or liable for the consequences of improper product use.
1 Year Warranty
THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK.
Do not use this product until you have carefully read the following agreement.
This sets forth the terms and conditions for the use of this product. The installation of this product indicates that the BUYER has read and understands this agreement and accepts its terms and conditions
DISCLAIMER OF LIABILITY
Edge Products Inc. and its successors, distributors, jobbers, and dealers (hereafter SELLER) shall in no way be responsible for the product's proper use and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.
The BUYER acknowledges that he/she is not relying on the SELLER’s skill or judgment to select or furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the description on the face hereof and the BUYER hereby waives all remedies or liabilities, expressed or implied, arising by law or otherwise, (including without any obligations of the SELLER with respect to fitness, merchantability and consequential damages) or whether or not occasioned by the SELLER's negligence.
The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages. The BUYER acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER agrees to indemnify the SELLER and to hold the SELLER harmless from any claim related to the item of the equipment purchased. Under no circumstances will the SELLER be liable for any damages or expenses by reason of use or sale of any such equipment.
The SELLER assumes no liability regarding the improper installation or misapplication of its products. It is the installer's responsibility to check for proper installation and if in doubt, contact the manufacturer.
LIMITATION OF WARRANTY
Edge Products Inc. (hereafter "SELLER") gives Limited Warranty as to description, quality, merchantability, fitness for any product’s purpose, productiveness, or any other matter of SELLER's product sold herewith. The SELLER shall be in no way responsible for the product’s open use and service and the BUYER hereby waives all rights other than those expressly written herein. This Warranty shall not be extended or varied except by a written instrument signed by SELLER and BUYER.
The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. All products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by Edge Products Inc.
If the BUYER sends back a failed unit that is out of warranty and chooses to buy a refurbished unit, the refurbished unit will only carry a 60 day warranty. If the BUYER purchases a new unit at a predetermined discounted rate, it will have the standard 1 year warranty.
Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any other contingent expenses.
Under no circumstances will the SELLER be liable for any damage or expenses insured by reason of the use or sale of any such equipment.
This warranty is VOID for any new products purchased through auction websites. WARRANTY IS VALID ONLY FOR NEW PRODUCTS PURCHASED THROUGH AUTHORIZED DEALERS (proof of purchase required for all warranty claims).
IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT: THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE, TO THE PLACE OF PURCHASE WITHIN SIXTY (60) DAYS FROM DATE OF PURCHASE FOR A FULL REFUND.
THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS.
The Edge Evolution programmer by Edge Products is an easy at home plug and play installation. Please read the installation instructions before installing. For additional information please call us at 1-877-216-5446 or 701-253-5906.