Go Rhino OE Xtreme 4" Nerf Bars
- Designed with slick OE styling
- Extra wide step pads are UV resistant
- Available in black, textured black or stainless steel finishes
- Custom mounting brackets make installation simple and easy
- Weight rating: 250 lbs.
With their easy installation, sharp OE styling, and rugged durability, Go Rhino OE Xtreme 4" nerf bars are an excellent choice for improving your vehicle's accessibility. Constructed from tough steel tubing with extra wide UV resistant step pads, they're built to get the job done and last for years.
Each pair of these Go Rhino 4" oval step bars comes with a set of custom mounting brackets made to fit the specific make and model of your truck. This ensures simple and secure no drill installation on most models. You also have your choice of black, textured black or stainless steel finishes, so you can pick the perfect pair to suit your vehicle.
Go Rhino OE Xtreme nerf bars also sport ample non-slip step pads that are UV resistant. They'll hold up against the wear and tear of repeated use and exposure to the elements. Backed by a limited lifetime warranty for stainless steel, and a five year warranty for powder coated black & textured black, these side step bars are a quality investment in your truck.
Go Rhino Xtreme nerf bars offer an easy at home installation without any drilling for most models. If drilling is needed, it will be minimal. For additional information please call us at 1-877-216-5446 or 701-253-5906
Limited Lifetime SS / 5 Year Black
Go Rhino has a limited lifetime warranty on all of their polished stainless steel truck accessories and a 5 year limited warranty on all of their black powder coated truck accessories including these 4" oval nerf bars.
Related Articles (9)
Product Reviews Summary
|Price / Value||4.2|
|Ease of Installation||4.0|
|32 Customer Reviews|
Part #: GO-684439980T Posted on
|I thought it was a little over priced. Once install issues are laid to rest, this product is as good as any other. Tighten up again after awhile and you are good to go. No purchase regrets. The final test will be how well these steps hold up overtime.|
Part #: GO-684435187T Posted on
|They installed in less then 15 minutes per side and function very well no flex I was a bit worried because I am 260 lbs. And the price was great.|
Part #: GO-684423971PS Posted on
|The problem I had was with the T-Bolts that held the mounting bracket to the under side of the Jeep Grand Cherokee. There are four in the mounting kit. I had to drill a small hole in each T-Bolt. Then screw in a small little screw into the hole to keep the bolt in place. I was lucky and drilled little holes right where I wanted into the under carriage next to the hole where the T-bolt was sits. Then it was possible to bolt on the mounting bracket. The very small screw prevents the flat top of the T-Bolt from spinning. Then completing the job is easy without any added help.|
|I didn't like the fact that the bars weren't a full tube, but actually hollow underneath. They seam to fill with mud easily|
Part #: GO-684409987PS Posted on
|These steps were really nice looking but that was it. There is nothing extreme about them. The install was a little annoying because some of the mounts did not align and then once they were installed there was a lot of flex. I honestly did not see them lasting long.|
|No as heavy duty as the ones they replaced but they do have a 5 year warranty.|
|Put it on my wife's Jeep Grand Cherokee and she loves it|
Part #: GO-684413675PS Posted on
|These are a decent enough quality, and for the Ford Explorer did not require any drilling to mount. However the front bracket is poorly designed, with only one anchor point, with no extension to the back of the bracket for leverage to support any weight that is applied to the step surface. I ended up drilling an additional hole in the bracket and tapping the body to receive an additional bolt. Also, I realize that Ford only provides two anchor points (front and back), poor design by Ford, but it really needs a middle bracket to properly support weight being applied to the running board. I tried to acquire an additional front bracket to drill and mount in the middle, but was unable to purchase from either Real Truck or from the manufacturer. The brackets already display some bending from weight applied entering the vehicle.|
Also the bolts that were provided to attach the bars to the brackets are flat headed square "T" bolts, which don't slide in channels, but act as regular bolts and where difficult to find a socket or wrench that would fit them. It was an odd sized head that only a 12-point 11/16 socket, or possibly a 12-point 17MM box end wrench would fit, but there is no room to swing a wrench, given that the bolt was in the narrow bracket channel. Very strange choice for the bolts in this situation.
When I purchased these, the indication from the illustration, was that there were 3 brackets per side. The description does not specifically indicate how many were being shipped, this is Real Truck's fault for inadequate specifications. To my dismay, there were only two per side, and inadequate at that.
I wish I had purchased the IONIC running boards, they are a bit more expensive, and they require drilling to install, but they come with three specially designed brackets per side, and are a much better mounting system overall, which would better support a load. Go watch the mounting video before making your choice, you will see what I mean.
I may sell mine on ebay or craig's list and buy the IONICs.