Kargo Master Pro III Truck Racks
- Constructed from .083" thick high tensile strength steel
- 1 5/8" round tubing
- Clamp-on design, no drilling or cutting needed
- Zinc primer with high gloss black marine-grade powder coat finish
- 1,000 lb cargo capacity
- 155" long to fit full size trucks without topper
- 142" long to fit midsize trucks without topper
- 1,000 hour ASTM salt spray resistance
- Quick-release rear cross bar, no tools required
- Rack easily removes with four bolts
- Extra tie downs help organize cargo
- Gusseted cross bars and swaged joints provide extra strength
- Limited lifetime warranty
- Made in the USA
The Kargo Master Pro III truck bed rack is available for all full size and midsize. They are all constructed of high quality materials and given an industrial strength black powder coat finish. The frame is constructed of 1 5/8 inch high tensile round tubing with fully gusseted cross bars for increased strength. The round tubing helps cut through the wind for more efficiency. Providing less drag and wind noise.
All Kargo Master truck racks are coated with a zinc primer before being given a marine grade black powder coat finish that will not fade, rust, or dull. The Pro III truck rack features a 1,000 pound cargo capacity allowing users to safely handle the largest loads. Rugged 17 inch long mounting plates ensure the cargo rack is securely fastened to you truck bed. High strength side rails keep cargo from shifting off the rack and their contoured design form safety grab handles.
Kargo Master uses yellow zinc fasteners that will outlast standard white zinc fasteners used in other truck racks, and the nylon self-locking nuts will ensure your rack stays tight. Kargo Master's Pro III truck rack also features a removable (no tools required) rear cross bar to allow easy truck bed access. All Kargo Master truck bed racks feature a limited lifetime warranty and are made in the USA.
Order NotesPlease Note: Before taking delivery on a Common Carrier (Truck Freight) shipment, please thoroughly inspect for shipping damage prior to signing for the shipment. If anything appears to have been damaged during transit, we suggest you refuse shipment. After you sign for truck freight shipment it is very difficult to file a ship damage claim and attain reimbursement.
View Available Part Numbers For This Product Line
Product Reviews Summary
|Price / Value||4.3|
|Ease of Installation||4.3|
|17 Customer Reviews|
Part #: KGM-80030 Posted on
|Looks great. Good function. Makes ladders easy to access. Dented a bit easily when installing. Needs a bit more support on the front. |
Overall, happy with my purchase. Thank you!
Part #: KGM-80000 Posted on
|Good quality medium weight rack.|
Part #: KGM-80070 Posted on
|I like all aspects of this rack. Solid, well constructed and good looking, (as far as ladder racks go). I have a cab high fiberglass contractors cap made by Lear installed on a Ram Quad Cab. Attaching the KM-80070 to the camper shell was straight forward and easy. Take care to center the rack properly while marking the holes to drill through the cap. Measure twice cut once.... |
The not so hot aspects of this product.
A: The fastener pack, All good quality anodised fasteners, but the bracket mounting bolts are way too short and had to be replaced. Customer service was no help. "Go buy your own" NICE
My cap has a reinforced top, you know, Contractor's grade made for mounting things like ladder racks on. The supplied bolts 1 inch shorter than required.
B: I built an "Airfoil" or "wind jammer" for the leading, or front crossbar. The air disturbance from the front crossbar caused the truck's roof to vibrate. At 50+ Mph communication within the cab was impossible. Vibration completely gone.
Airfoil can be made quite simply. I had 3/16" acrylic sheet lying around, but aluminum of decent thickness would do nicely. cut it's length to equal the racks width, and 3 to 4 inches high.
Fasten to front cross bar flush with top of bar and angling forward and down covering crossbars diameter. you only need to deflect air that wood be affected by the bar. You do not need to fill entire gap from top of bar to roof. My prototype I attached to the bar with cable ties, the finished product is attached with 4 stainless hose clamps.
C: The product ships on a long and narrow skid, boxed up well and banded down. claims to be 135lbs. and advises you to have lots of help or a shipping dock. My guess is that it ships at more like 90 lbs and was easily unloaded and pulled into my garage without assistance.
Hope this helps! Working to pay Taxes in Michigan.
Part #: KGM-80000 Posted on
|Initially when the rack comes to your house and you open it.Its intimating..But once you lay it out it becomes easier to figure out. All in all, it's a very sturdy rack for being put together in pcs.|
Part #: KGM-80020 Posted on
|good product, easy to install. just wish they offered a rear window protector with this.|
Part #: KGM-80000 Posted on
|This is a really good looking rack, strong, well thought out, straight forward to assemble. I'm very pleased. No negative points to make.|
Limited Lifetime Warranty
LIFTETIME FRAME WARRANTY: If your product cracks, bend, buckles, or structurally fails in any way, Kargo Master, at its option and expense, will either replace or repair the product.
EXECPTIONS AND EXCLUSIONS: This warranty does not cover shipping damage, product misuse, improper installation, road hazards, impairment from accidents, overloading above the stated rack capacity. This warranty does not cover the cost of repairs made outside the factory without factory authorization. Any alterations to this product renders these warranties null and void.
LIMITED WARRANTY: This frame warranty contains all of the terms of the warranty being provided in connection with Kargo Master Products. No person is authorized to make any changes or additions to the terms set forth herein unless they are set forth in writing and signed by an officer of the Company. All other express and implied warranties, including warranties of merchantability and fitness for a particular purpose, are hereby disclaimed. If the Kargo Master Product failure is covered by the Frame Warranty, the Company's sole obligation shall be replacement or repair of the Kargo Master product described above. In no event will the company be liable or responsible to the purchaser, employees or agents of the purchaser, family members or other users for any damages other than the cost to replace or repair the Kargo Master product as described above. This limitation applies to damages of any kind, including any direct or indirect damages, lost profits, lost savings, loss of use or cost of capital, physical injury or death, or other special incidental, exemplary, punitive, or consequential damages whether for breach of contract, tort, or otherwise or whether arising out of the use of or the inability to use the Kargo Master product. This warranty is limited: thus the terms and conditions of the warranty should be reviewed and understood before purchasing or installing the Kargo Master product.
Kargo Master Return Policy: Kargo Master products that have been installed, used, drilled, bent, scratched or otherwise damaged are no longer in new and ready–to-sell condition and cannot be returned or refunded. Kargo Master Products are fully warranted according to Kargo Masters warranty policy which is generally limited to repair or replacement based on Kargo Master Discretion. Returned merchandise must be in new (with the original packaging) and ready-to-sell condition. If returning a Kargo Master product, it will be the customer’s responsibility to pay the return shipping and if not in new condition a credit will not be issued. . (This is Kargo Masters Policy). As always, if RealTruck makes an error we would cover the return fees and replacement costs.
Install the Kargo Master Pro III rack without any expensive tools! Each order comes complete with everything you need. Call 877-216-5446.