Northwest Realtree Heated Seat Cushion PSH1301-RT-B-MX4
- Carbon fiber thermal technology delivers quick and safe results
- Deep, comforting warmth in just 60 seconds
- Handheld temperature controller features settings between 0-10
- 30 minute timer with safety auto shut-off
- Fast and easy secure strapping system
- 12 volt plug power connector
No one likes getting into a cold car day after day. Whether you're trying to relieve back pain or wanting to stay warm during winter, the ProHeat heated seat cushions are just what you're looking for. Numerous patterns available to match your unique style.
The ProHeat's technology and intelligent design separates it from the crowd with its superior performance. In about only 60 seconds you will start to experience the deep, comforting warmth. The large heating element measures 12" in width and 15" in length. The temperature controller allows you to set your level of comfort easily with a setting between 0 to 10. The handheld controller features a 30 minute auto shut-off timer and a quick-disconnect feature in the wiring harness for added safety.
Made from Polyester with two coatings of polyurethane, you can be sure it's highly waterproof. By using carbon fiber thermal technology, results are delivered quickly and safely with properties that provide more benefits than metal heating elements. Your mind can be at ease knowing that safety was carefully considered when designing the ProHeat system. The carbon fiber will outlast copper and eliminates the potential for sparking. Each heating pad contains a bi-metal thermostat to help ensure the pads won't over heat.
Installing your ProHeat heated seat cushions is easy! The buckle strap system installs safely and securely by simply placing seat pads on the seat bottom and backrest and putting the straps into the buckles and pulling tightly. Get your seat heater today and experience the comforting warmth in your cold vehicle.
Product Reviews Summary
|Price / Value||3.0|
|Ease of Installation||3.0|
|1 Customer Review|
Part #: NWS-PSH1301-RT-B-MX4 Posted on
|These heated seat covers really work. After a few minutes on high, you need to turn them down to stop cooking your butt and back. They were a bit cumbersome to install at 13°F, but well worth the effort. Be careful not to pull the draw ties too tight or you can pull the clips out of the cover. Also, the clips are a bit tight, so you have to make sure the ties are not twisted. The covers stay in place and don't roll up getting in and out. Look good and so far so good. if using a 12VDC splitter, you'll need to get one rated for 10+amps (5 amps for each seat). You'll blow the fuse on the cheap splitters. |
2014 Mossy Oak RAM1500
1 Year Warranty
The ProHeat system offers a one year warranty to be free of defects at the time of shipping from their factory.
Installing your ProHeat undercover seat heaters is easy with the strapping system for all seat styles. Simply place the seat pads on the seat bottom and backrest and put the straps into the buckles and pull snugly. Finally, plug in the 12 volt plug power connector.