RIGID D-Series PRO Black Flush Mount LED Lights
- Constructed from heavy duty aluminum
- Features a built-in heat sink to keep it cool
- Choose from several beam patterns
- Coated with a resilient polyester powder coating
- Plug and play harness and all mounting material included
- Complete with durable polycarbonate lens
- Proudly made in the USA - Gilbert, AZ
- For off-road use only
Get tons of power in a tiny package! The RIGID D-Series PRO Black flush mount LED lights pack a major punch of light source for the front end of your vehicle. Being proudly made in the USA, these lights are built to last. RIGID PRO series are 3" x 3" off-road lights with now more than a 100% lumen increase than previous models, Rigid made sure to craft them with the highest quality materials.
Manufactured from durable A360 aluminum and then sealed with a silicone gasket to keep the elements out, these LED lighting sources are made to withstand daily wear and tear. Rest assured that the bulbs themselves will be protected as each light has an indestructible polycarbonate lens. Made for off-road use only, having this lighting system on your ride is going to provide optimal light power on even the darkest of nights! Each light has four high-powered LED's that have more than 50,000 hours and give 3168+ raw lumens.
Choose from different beam patterns including wide-angled flood patterns and long-range spot patterns. Hybrid Optics are the most powerful optics on the market today. Each optic uses a combo of reflector and lens in order to capture a maximum amount of power that is emitted from the LEDs. Mount the Rigid Industries dually series LED lights on your ride in no time flat. Installation is easy as all mounting hardware is included. Complete with plug-n-play harness and an in-cab switch, you can simply install and go! You can also choose between a surface or flush mounting style. Get your off-road LED lights today!
Beam patterns explained
What is the difference between driving lights, spot lights, fog lights, and flood lights?
Often referred to as fog lights, driving lights have a beam that is able to travel a longer distance, but not as wide. Driving lights perform best when used to supplement your high-beams. Or they may be aimed lower and supplement your low-beams.
Spot / Off-Road Lights
Spot lights are strictly for off-road usage due to their powerful, tight beam. Using an array of spot lights will offer more coverage by aiming them at slightly different angles.
Fog lights are generally mounted low on the vehicle such as the bumper or bumper grille. The light pattern is very wide, with a flat horizontal cutoff. When properly aimed, fog lights are the perfect complement to your low-beams. This is by far the most popular beam pattern and are installed on many vehicles from the factory - though there's always room for improvement by upgrading your existing fog lights.
Flood lights have a beam pattern that may be similar in width to a fog light, but the beam does not have a horizontal cutoff. Therefore they are also for off-road use only. As with spot lights, a mounting location high on the vehicle is ideal.View Available Part Numbers For This Product Line
Limited Lifetime Warranty
If the product was purchased from an authorized RIGID reseller, the product should be returned to that reseller if less than 60-days from purchase date. If it has been longer than 60-days from purchase date, please review the following and contact RIGID directly. If the item was purchased from RIGID directly, please review the following and contact RIGID.
RIGID is not liable for any charges incurred by the Customer relating to installation, repair or removal of RIGID product offerings.
RIGID warrants that this product will be free from defects in material and workmanship. If you believe your RIGID product is defective, it must be returned to RIGID for inspection by our warranty claims department. After inspection, RIGID will verify that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, RIGID will determine whether the product will be repaired or replaced in accordance with RIGID Limited Lifetime Warranty*.
*RIGID Limited Lifetime Warranty:
If RIGID determines, in its sole discretion, that your product is defective in material or workmanship, RIGID will honor your warranty claim. In some cases the product will replaced, depending on the specific timeframe of the purchase. If the product is repaired, all parts, labor, and return shipping may be covered by RIGID.
10 year limited warranty – All Radiance Product Line (Light Bars & Pods)
3 year limited warranty – All Truck-Lite Headlights
2 year limited warranty – All products with powder coat/finish wear (RIGID uses the highest quality materials available. Depending on environment, powder coat can fade). Additional 2 year limited warranty products include accessories, covers, mounting options, kits (excluding light, see limited lifetime warranty), and all other items that RIGID offers as part of a closeout or discontinued sale.
1 year limited warranty – UWL (Under Water/Wake Flame) Series of lights, Interior Dome Lights, Halo Flashlights, flashlight accessories, Reflect housing, Reflect body, and Reflect Clamp.
No warranty offered – Reflect Mirror
RIGID, at its sole discretion, will determine the proper handling of all warranty claims. All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
1 Negligence: Improper installation, improper use, etc.
2 Abuse: Road hazards, Damage beyond the limits of "normal wear and tear."
3 Unauthorized Repair: Repair service performed by an unauthorized service center.
4 Seal Tampering: Removal of bezel or bezel screws will compromise the integrity of the water-tight seal.
Without registering your purchase or having your original proof of purchase available, the RIGID Limited Lifetime Warranty could be voided. No RIGID Limited Lifetime Warranty is available for the Capture series of lights until a warranty registration is received from the end user and approved by RIGID.
All warranties are non-transferable. Warranty terms and policies are subject to change without notice.
Quickly install your RIGID D-series PRO Black flush mount LED lights as they come with a plug and play harness. Simply mount on your vehicle with the mounting brackets and hardware that come with the product. If you have any additional questions please call us at 877-216-5446.