Rigid SR-M2 Series LED Driving Lights 91231
- 2 x 5 watt LEDs
- 45° Driving Beam Pattern
- Light Output = 1125 Lumens
- 50,000 Hours Lifespan
- Current Draw = 0.82 Amps
- Operating Range from -40°F to 145°F
- Single Light
Light up just about anywhere with the Rigid Industries SR-M2 Series LED lights. Get an unlimited amount of lighting on your truck or SUV from a tiny, compact case. With its small design, you can mount the SR-M2 series lights on other motor toys! Easily light up the night once these are installed on your vehicle.
Packed with two or three high-powered LEDs, each light features Specter Optics for the highest quality performance. Built from a durable cast aluminum and coated in a resilient polyester powder coating, the SR-M2 lights are made to last. Complete with a polycarbonate lens and a molded silicone gasket, the LEDs are protected from the elements and any possible damage.
Choose from different beam patterns including wide, diffused, and driving. You also can pick the mounting style that best suits your vehicle including flush or surface mounts. Install in no time as each light comes with all installation hardware, wiring harness, and in-cab switch. Don't go another day without the Rigid Industries SR-M2 series LED lights.
Beam patterns explained
What is the difference between driving lights, spot lights, fog lights, and flood lights?
Often referred to as fog lights, driving lights have a beam that is able to travel a longer distance, but not as wide. Driving lights perform best when used to supplement your high-beams. Or they may be aimed lower and supplement your low-beams.
Spot / Off-Road Lights
Spot lights are strictly for off-road usage due to their powerful, tight beam. Using an array of spot lights will offer more coverage by aiming them at slightly different angles.
Fog lights are generally mounted low on the vehicle such as the bumper or bumper grille. The light pattern is very wide, with a flat horizontal cutoff. When properly aimed, fog lights are the perfect complement to your low-beams. This is by far the most popular beam pattern and are installed on many vehicles from the factory - though there's always room for improvement by upgrading your existing fog lights.
Flood lights have a beam pattern that may be similar in width to a fog light, but the beam does not have a horizontal cutoff. Therefore they are also for off-road use only. As with spot lights, a mounting location high on the vehicle is ideal.View Available Part Numbers For This Product Line
Limited Lifetime Warranty
The Rigid Industries SR-M2 Series LED lights are an easy at home no drill installation. For additional information call us at 1-877-216-5446 or 701-253-5906.