RIGID Q-Series PRO Black LED Lights
- Extruded aluminum housing
- GORE® pressure equalizing vent
- Unbreakable polycarbonate lens
- Durable UV 3800 polyester powder-coat
- IP68 Certified
- MIL810-STDG Vibration certified
- Over/under voltage protection
- Operating temp -40° F – 145° F
- Sealed Deutsh connector
- 50,000 Hour lifespan
- Electrically protected against RFI/EMC interference
- Integrated thermal management system
- Includes wiring harness and switch
- For off-road use only
- Made in the USA – Gilbert, AZ
RIGID Q-Series Pro Black LED lights are available in many different beam patterns and each is packed with awesome features. These lights are constructed from extruded aluminum and features an unbreakable polycarbonate lens. They are finished in a durable UV 3800 polyester powder-coat to keep them looking good.
Take your Rigid Q-Series Pro Black LED lights on the trail and put them to the test. These lights are IP68 and MIL810-STDG vibration certified. Don't worry about overheating your lights. Rigid equipped these lights with a thermal management system and over/under voltage protection. Mount yours anywhere and light up your path for 50,000+ hours.
Beam patterns explained
What is the difference between driving lights, spot lights, fog lights, and flood lights?
Often referred to as fog lights, driving lights have a beam that is able to travel a longer distance, but not as wide. Driving lights perform best when used to supplement your high-beams. Or they may be aimed lower and supplement your low-beams.
Spot / Off-Road Lights
Spot lights are strictly for off-road usage due to their powerful, tight beam. Using an array of spot lights will offer more coverage by aiming them at slightly different angles.
Fog lights are generally mounted low on the vehicle such as the bumper or bumper grille. The light pattern is very wide, with a flat horizontal cutoff. When properly aimed, fog lights are the perfect complement to your low-beams. This is by far the most popular beam pattern and are installed on many vehicles from the factory - though there's always room for improvement by upgrading your existing fog lights.
Flood lights have a beam pattern that may be similar in width to a fog light, but the beam does not have a horizontal cutoff. Therefore they are also for off-road use only. As with spot lights, a mounting location high on the vehicle is ideal.View Available Part Numbers For This Product Line
Limited Lifetime Warranty
Install your RIGID Q-Series Pro LED lights anywhere with the included wiring harness and install hardware.