BedRug Carpet Bed Liner BRQ09SBSGK
- Trucks with spray-on bed liners require a spray-on liner adhesion kit (part #BRZSPRAYON) – sold separately
- Durable polypropylene construction
- Closed cell foam backing
- Complete truck bed protection
- Waterproof, chemical, & stain resistant
- Compatible with other truck bed accessories
- Kit includes liner and 3M hook and loop
- Lifetime warranty
- Made in the USA - Old Hickory, TN
Introducing the BedRug Full Bed Liner, the most advanced truck bed protection available. This is impact protection at its finest with ¾" of custom molded closed cell foam. The bed of your truck will be protected from scrapes and dings, while keeping your knees cushioned when working in the bed. The non-abrasive design won't rub your paint like a drop-in bed liner or require the scuffing that a spray in bed liner does.
Constructed of a marine grade polypropylene, these truck bed liners are waterproof and withstand harsh acid and petroleum products. The waterproof and stain resistant design ensures quick and easy cleaning process, simply spray off with a pressure washer. The BedRug will also help keep cargo from sliding around in the bed!
The BedRug Full Bed Liner works great with other accessories as well, tonneau covers, tool boxes, bed extenders and more. Call in to our industry leading customer service team for your bedrug today!
Frequently Asked Questions
For Additional information, please call 1-877-216-5446 or 701-253-5906
How does the bedrug install?
The sides zip together to the floor and the complete unit attaches to the floor with 3M hook and loop fasteners. Plan about 20-30 minutes.
How does the tailgate piece fit/install?
The tailgate piece is attached to the floor of the bedrug and extends to the top of the tailgate and attaches with 3M hook and loop fasteners.
Can the bedrug be washed?
YES. Dirt and spills can be cleaned with soap and water from a garden hose or high pressure washer. Actually, Gasoline, acids, solvents, chemical compounds, and any petroleum product will not damage the carpet or foam. The closed-cell cross linked polyethylene foam can not soak up ANY liquid. The BedRug® foam will not dry out, crumble, dissolve, or dissipate in any way.
What is the bedrug made of?
Polyester carpet and molded closed-cell polyethylene foam.
How long is the bedrug warranty?
It has a limited life-time warranty for the life of the original truck it was installed in to the original owner.
How It Works
Product Reviews Summary
|Price / Value||4.2|
|Ease of Installation||4.6|
|5 Customer Reviews|
Part #: BRI-BRQ09SBSGK Posted on
|BedRug Carpet Truck Bedliner . It took me about 2 hours to install. It rained on me and I had to stop for about 30min before I was done. It fit right and looks great. The one problem I have with the bedrug is the cargo will slid to the front It has no grip for the cargo. I solved that problem with a cargo bar across the bed to hold my items. |
Part #: BRI-BRQ09SBSGK Posted on
|Thsi really finishes off a bed nicely. Combined with a good sealing topper you end up with a luxurious bed that can handle some rough treatment.|
The unit installed in about 90 minutes in my garage. The main thing to remember is to follow the instructions regarding zipping the side panels on with the liner INSIDE-OUT. A friend warned me about this and I can see how it would be very difficult to try and zip it together the other way.
Another thing to remember is to locate your tie-down locations by measuring before installing the rug. I had to poke and prod for quite a while to find the holes to screw them back into, but that one was all my fault ;-)
|The BedRug over all was a very easy installation and very pleased. However, fitting the tailgate did take a little extra work since I have the factory Taigate Step. The bedrug model I installed included the new design that fits the tailgate with this option. I installed the main bed first (with the tailgate piece zipped in place to make sure of a proper fit.) When it came to secure the tailgate section I unzipped it and inserted it over the step bar handle and then rezipped it to the main bed. But first, you have to remove the screws that hold the plastic tailgate lid to the tailgate. I had to slit about an inch of the hole in the rug to fit over the bar handle. I cut the slit in the direction of where the bar goes down to the right (facing the back of the truck). This actually worked well allowing some good freedom of movement for the bar to go up and down. Then I worked the rest in place and zelcroed it down. I replaced some of the screws to hold the tailgate section in place for the final step of installation. I then used a large flat screw driver to help tuck the end of the rug under the plastic tailgate lid replacing screw as I went. It was a bit of challange to fit the end of the rug where the bar is attached to the tailgate. There is little to no play in lifting up the plastic of the tailgate were the bar is attached. This part is the challange. Using 2 flat screw drivers and a 1 inch puddy knife and 30 careful minutes of my time I got it in place.
End result: It fits perfectly and looks great. Since it was below 65 degees, I did the installation in my heated garage, which got up to 80 degress with my kerosene heater. Installation needs to be above 65 degrees, the warner the better.
Very pleased, this is the best liner out there. I have used it about a month, hauled some loose mulch and it cleaned up perfect using my air compressor. Would buy it again.
Limited Lifetime Warranty
Wise Industries warrants BedRug and VanRug for pickup trucks and vans to be free from defects in materials and workmanship. BedRug bedliners will be warranted for the duration of the vehicle ownership by the original BedRug purchaser. The terms of this warranty may vary from state to state. You may have rights under specific state laws that differ from the terms of this warranty. Proof of purchase will be required for warranty service. Customer modifications and/or improper return packaging of the product may void this warranty. Product should be cleaned before return. For warranty instructions, returns and packaging contact Wise Industries Customer Service at 800-462-8435. Labor and shipping are not covered under the terms of this agreement. If you are an OE accessory distributor, dealer or retailer, BedRug complies with your current factory warranties.
A BedRug is very easy to install. You just zip the molded sides to the BedRug floor. Some models may require trimming. Then the BedRug installs to your truck bed with 3M hook and loop. For additional information, please call 1-877-216-5446 or 701-253-5906.