Extang Trifecta 2.0 Signature Series Tonneau Cover 94430
- Cover constructed of upgraded premium canvas material
- Aluminum frame and support bars
- Triple fin seals exceed OEM standards
- Triple fin seals are easily replaced if damaged
- No-drill installation
- EZLock clamps self-lock when in use
- Easily attached or removed in seconds with no tools
- Buckle straps hold cover in open position while driving
- Limited lifetime warranty
- Made in the USA - Ann Arbor, MI
The Extang Trifecta 2.0 Signature is constructed of a premium grade canvas adhered to an aluminum frame. The canvas tarp provides excellent UV protection as well as a more premium look than ordinary vinyl. Along the exterior of the frame is an EPDM rubber, triple fin seal that keeps rain and debris out of the bed exceptionally well. The seals exceed OEM standards.
Installation of the Trifecta 2.0 Signature is extremely easy. The cover arrives fully assembled inside the box and requires no tools to put on the truck. Once the packing material is removed, you simply set the cover on the truck making sure it is lined up evenly side to side, secure the Jaw-Grip clamps to the truck in the front, fold it back, then secure the spring loaded, EZLock clamps to the truck in the rear. To remove, simply reverse this process and get full access to the bed within seconds.
Extang warrants this cover against any manufacturing defects for the lifetime of the product. The cover also is made in the USA so you can rest easy knowing the quality is second to none.
- 2009-2011 Dodge Ram 1500, 6'4" Bed
- 2012-2018 Dodge Ram 1500 w/o RamBox, 6'4" Bed
- 2010-2011 Dodge Ram 2500, 6'4" Bed
- 2012-2019 Dodge Ram 2500 w/o RamBox, 6'4" Bed
- 2010-2011 Dodge Ram 3500, 6'4" Bed
- 2012-2019 Dodge Ram 3500 w/o RamBox, 6'4" Bed
- 2010-2011 Ram Truck 1500, 6'4" Bed
- 2012-2018 Ram Truck 1500 w/o RamBox, 6'4" Bed
- 2010-2011 Ram Truck 2500, 6'4" Bed
- 2012-2019 Ram Truck 2500 w/o RamBox, 6'4" Bed
- 2010-2011 Ram Truck 3500, 6'4" Bed
- 2012-2019 Ram Truck 3500 w/o RamBox, 6'4" Bed
Product Reviews Summary
|Price / Value||4.7|
|Ease of Installation||4.7|
|3 Customer Reviews|
Part #: EXT-94430 Posted on
|Have had severe rain since install...Not one drop in bed...Last week in NJ we had 16inches of heavy wet snow..All 16 was on top of cover..held up awesome and still not one drop of water in bed..Follow the instructions, you will experience the same..Thumbs up!|
|Easiest installation we have ever done! The cover is durable and great looking! Easy to get into, as well! Great value!|
|Great looks and quality. The only thing I didn't care for is having to lay down in the truck bed to attach the front clamps. It takes a little longer to remove then my last cover because of this. |
Clamps are strong though. No water leaks with a good gasket around the base of the cover. Overall, I recommend purchasing the cover.
Limited Lifetime Warranty
The Extang Trifecta 2.0 Signature Series carries a limited lifetime warranty against defective materials or workmanship on all tonneau rails, aluminum components, clamps, bows, hardware.
This warranty is against defective materials or workmanship. The warranty is void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, acts of God, normal wear and tear or other causes not arising out of defective materials or workmanship. Consequential and incidental damages are not covered under this warranty.
THE FOLLOWING CONDITIONS WILL ALSO VOID THE WARRANTY:
Wind whip damage — Tarps must be secured at all points when vehicle is in motion. An unsecured tarp will flap, resulting in damage to the fabric. Improper cleaning — It is recommended to use the tested and approved Extang Tonno Tonic or clean with soap and water only. Do not use vinyl conditioners (i.e. Armor All) because they will shrink the vinyl. Overloading of cargo — Cargo should not touch the tonneau at any point. Protrusions in the tarp will stress the fabric. Cargo may shift while traveling and cause it to push against the fabric or panels and damage it. Driving with panels open or improperly secured on all folding tonneaus — Prior to vehicle operation, clamps must be tightly secured so that clamp lips tightly grip the inner bedside metal surface. Open position: Tonneau must be completely folded and secured with BOTH buckles. Closed position: Tonneau must be completely flat and secured at all 4 clamps. Opening panels without removal of debris on all folding tonneaus — Top of tonneau MUST be free of foreign material including snow and ice before opening panels or severe damage may result. Towing — Do NOT tow your vehicle from the rear with any Extang tonneau cover on your truck.
The warranty applies to the original consumer/purchaser. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective. Warranty coverage starts from the date of purchase.
PERFORMANCE: Provided all warranty conditions are met, Extang will either repair or replace (at Extang's option) the product or component. Extang may require the original item to be returned postage prepaid for final determination. Extang reserves the right to substitute and offer the respective warranty discount on an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. A return authorization number must be obtained from our customer service department prior to returning any product. Shipping charges will apply for any repair or replacement. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.
Any Extang truck bed cover can easily be installed at home. The Trifecta 2.0 Signature Series bed cover comes fully assembled. Just take it out of the box and attach to your pickup truck bed in minutes with no tools. The installation are clear cut and easy to read. For additional information give us a call.