MBRP XP Series Exhaust System S5066409
- Constructed out of 16 Gauge T-409 stainless steel
- Mandrel bent tubing increases air flow and reduces heat
- Tuned to get the optimal sound from your truck
- Dyno proven to increase horsepower and torque
- Exhaust tips are dual walled polished T-304 stainless tips
- Simple no drill installation
- Limited lifetime warranty
Don't let your stock exhaust drag you down. It's time to improve your look and performance with MBRP XP series exhaust system.
The MBRP engineers crafted this system for pure performance. This exhaust system is constructed out of T-409 stainless steel, that is mandrel bent to increase air flow and reduce heat. Also have designed their mufflers to work specifically with your truck to give it optimal sound. Thanks to dyno testing each system is tuned to improve horsepower, torque, and give in better gas mileage.
Installing the XP series is super easy, with step by step instructions and using existing mounting locations to install. MBRP also has a limited lifetime warranty on all their stainless steel.
So if you are looking for a perfect blend of power and performance, then the MBRP XP series exhaust system is for you. Get yours ordered today!
Frequently Asked Questions
What is the difference between T304 and T409 Stainless?
T304 stainless steel will not oxidize or rust, it can however develop a golden color when exposed to high heat over time. T409 stainless steel has a fair amount of ferrous material in it and can show surface oxidization after some time, especially when exposed to road salt. This can be prevented by applying a stainless steel cleanser using a scouring pad. If you are concerned about long-term appearance, you should get the T304 system. If you are more concerned about the price, but want something that is more durable than aluminized steel, then the T409 system would be the system of choice.
WHAT IMPROVEMENTS CAN I EXPECT IN TORQUE, HP AND TEMPS?
While performance gains vary depending on the vehicle you can expect a gain of 5% to 10% in horsepower and torque. For example, with a 2005 Chevrolet Silverado with a Duramax diesel engine you will see a gain of 18HP and 28 ft/lbs measured at the rear wheels. You can also expect a reduction in exhaust gas temperature (EGT) by approx 200° F.
IS THERE A DIFFERENCE IN PERFORMANCE BETWEEN DUALS AND SINGLE EXHAUST SYSTEMS?
The performance gains are the same for duals and single systems. The duals offer a deeper more aggressive sound over the single system. This is due to the extra tail pipe and the fact that most dual systems have a slightly different muffler configuration than the single systems.
WHAT DOES "OFF - ROAD" MEAN?
An "Off-road" system is designed to deliver all out power gains. These systems make no provisions to retain the factory catalytic converter. Some jurisdictions do not allow the removal of your vehicle's catalytic converter therefore they can only be legally used off of the highways.
DO EXHAUST KITS INCLUDE ALL CLAMPS & INSTRUCTIONS?
All kits come complete with the required hardware as well as clear, easy to read instructions with lots of pictures to help you work your way through your installation.
WILL I HAVE TO WELD ANY COMPONENTS WHEN INSTALLING AN MBRP SYSTEM?
None of the MBRP exhaust systems require any welding. In fact, these systems can be installed using common hand tools.
WILL AN MBRP SYSTEM FIT A DUALLY TRUCK?
All of MBRP’s exhaust systems will fit dual rear wheel (dually) trucks. MBRP does recommend that tips be installed to extend the exhaust and avoid any discoloration of your vehicle.
WHAT SIZES IS MBRP EXHAUST?
For diesel vehicles MBRP offers performance exhausts in 4" and 5" diameter. Due to fitment issues some of the diesel systems come with a 3.5" down pipe. Performance gas systems use 2.5” to 3.5" tail pipes. The front pipes also vary from 2.5" to 3.5" depending on the size of the factory exhaust.
WHAT IS YOUR DOWN PIPE SIZE FOR THE FORD?
There are a few different sizes for down pipes for Ford trucks. For 94-97 trucks the pathway for the down pipe is very restrictive. In fact, the factory down pipe for these trucks are flat, approximately 1.5" in height. Our down pipe is 3" in diameter. For the 99-03 model years with the 7.3L Power Stroke diesel the down pipe is 4" and the 03-06 model years with the 6.0L Power Stroke diesel the down pipe is 3.5".
WILL THIS SYSTEM FIT TO MY TRUCK BED SIZE?
The majority of the diesel and many of the gas systems are designed to fit all bed sizes and cab configurations. If you have any questions don’t hesitate to call us toll free at 1-877-216-5446.
WHAT GAUGE IS THE STEEL THAT MBRP USES?
All of the pipes are made from 14ga and 16ga tubing.
WILL THE DUAL EXHAUST FIT AROUND MY HITCH?
All diesel exhausts will fit with factory installed trailer hitches as well as most aftermarket bolt-on hitches. You may run into interference problems if you have a fifth wheel or gooseneck hitch installed. In that case we recommend installing a single system.
DOES MBRP MAKE AN EXHAUST FOR THE FORD F-450 OR F550?
We now offer a turbo back system for the 6.0L Ford F350/F450/F550. We also sell both single and dual filter back systems for the 6.4L Ford F350/F450.
IS THE MIRROR POLISHED DIESEL TIP INCLUDED?
Tips are included with all of our 4" diesel applications (except as noted). Tips are included with all gas applications except the off-road systems where the tail pipe is a turn down style for added clearance.
MY PICKUP HAS A 137" WHEEL BASE... WHAT CAB SIZE IS THAT?
Heavy Duty or Super Duty pickup with a 137" wheelbase is a regular cab long bed configuration.
DOES MBRP MAKE EXHAUST SYSTEMS FOR THE CAB & CHASSIS TRUCKS?
We now offer a turbo back system for the 6.0L Ford F350/F450/F550 Cab and Chassis configuration.
WHAT EXHAUST TIP IS INCLUDED WITH MBRP EXHAUST SYSTEMS?
Our 4" Pro Series diesel systems come complete with dual walled angle tips. The single exit Pro Series has a straight cut T5049. The XP and Installer Series have an angled rolled end tip(s). Performance Gas, Muscle car and Jeep exhaust have a variety of tip designs to suit the style and application. In all cases the tips are mirror polished 304 stainless steel except for the Black Series systems which have a coated black tip. Our 5" diesel do not have a tip included nor do systems with a turn down tail.
DO YOU MAKE A TURBO DOWN PIPE FOR THE DURAMAX?
In the fall of 2009 MBRP introduced the GM8424 3" down pipe for all LLY/LBZ/LMM Duramax engines coated in a high heat black finish.
WHICH WAY SHOULD I INSTALL THE MUFFLER?
The muffler on the single diesel systems should be installed to allow the exhaust gasses to flow smoothly over the louvers on the muffler core. If the muffler is installed so that the louvers catch the exhaust gases it will increase resonance levels inside the vehicle.
HOW SHOULD THE DUALS MUFFLER BE MOUNTED... VERTICAL / HORIZONTAL?
It depends on the model of vehicle involved. The systems for the Chev/GMC Duramax and the Ford Power Stroke position the muffler outlets vertically. The systems for the Dodge trucks with the Cummins motor have the muffler positioned with the outlets horizontal.
CAN I LEAVE THE CATALYTIC CONVERTER IN?
Yes, the catalytic converter can be retained for all current model trucks. Be sure you have purchased the correct system that will allow you to retain the converter.
WHAT ARE THE DIMENSIONS OF THE MBRP TIPS?
Various sized tips are offered from 2 1/2" to 6". All of our tips are mirror polished 304 stainless steel and many are now available in black.
WHAT ARE THE ADVANTAGES OF A MBRP EXHAUST COMPARED TO THE STOCK?
By installing an MBRP exhaust system you will see an increase in horsepower and torque. Fuel mileage gains may be noticed as well as a decrease in exhaust gas temperatures (EGTs). By lowering EGTs you will increase your turbo longevity.
WHAT STYLE OF MUFFLER IS USED?
The muffler used on all diesel systems is a straight flow through design with a spiral louver core. The muffler is packed with stainless steel wool which is then wrapped with a ceramic fiber blanket. This combination creates the deep mellow exhaust note that MBRP is known for. Gas systems use a variety of high flow muffler designs utilizing the same spiral louver core design as the diesel mufflers or tuned chamber designs specific to the application intended.
WILL MBRP DUALS FIT MY TRUCK IF I HAVE A GOOSE NECK HITCH?
We do not recommend installing dual exhaust on vehicles equipped with a goose neck hitch. The under bed structure of the goose neck hitch and the driver side tail pipe interfere with each other. MBRP recommends using a single exhaust system if a goose neck is installed on the vehicle.
Limited Lifetime Warranty
The MBRP XP series exhaust system comes with a limited life time warranty. Remember you must send your warranty card and a proof of purchase to MBRP to activate your warranty. All warranties are form the date of purchase. If you have any questions please let us know at 877-216-5446.
MBRP has made installing one of their performance exhausts as simple and easy as possible. Each kit is designed specifically for your truck, car, or SUV and only normal hand tools are required. You can install this right at home in your garage without any drilling or cutting. The instructions included with each system are easy to follow and clear cut. For additional information please check out the example installation instructions below or call us at 1-877-216-5446.
|MBRP S5066304 Installation Instructions|