Sierra Dual AmberWhite 20" LED Light Bar
- Produces both amber and white light
- 6000K white and 590nm amber chips in a single LED package
- Includes wiring harness and rocker switch
- Includes mounting brackets and hardware
- IP68 rated – Resists dust, dirt, sand, and water up to 1.5m in depth
- 50,000 hour life expectancy
- For off-road use only
Light your terrain in any condition with a Sierra Dual AmberWhite 20" LED Light Bar. Dual AmberWhite light bars produce both amber and white light that are controlled by a two position rocker switch. Each LED package within the light bar contains a 6000 Kelvin white chip set as well as a high penetrating 590 nanometer amber chip set.
Sierra LED outshines there competition with high output lumens and dual color LEDs. No matter what terrain you're in a Sierra Dual AmberWhite 20" LED light bar will keep you out of the dark. These light bars are IP68 rated, meaning they can withstand dust, sand, dirt, and are submersible up to 1.5 meters in depth for up thirty minutes. This light bar comes with surface mounts, hardware, and a wiring harness with a rocker switch. Sierra Dual AmberWhite LED lights have an impressive life expectancy of 50,000 hours.
Beam patterns explained
What is the difference between driving lights, spot lights, fog lights, and flood lights?
Often referred to as fog lights, driving lights have a beam that is able to travel a longer distance, but not as wide. Driving lights perform best when used to supplement your high-beams. Or they may be aimed lower and supplement your low-beams.
Spot / Off-Road Lights
Spot lights are strictly for off-road usage due to their powerful, tight beam. Using an array of spot lights will offer more coverage by aiming them at slightly different angles.
Fog lights are generally mounted low on the vehicle such as the bumper or bumper grille. The light pattern is very wide, with a flat horizontal cutoff. When properly aimed, fog lights are the perfect complement to your low-beams. This is by far the most popular beam pattern and are installed on many vehicles from the factory - though there's always room for improvement by upgrading your existing fog lights.
Flood lights have a beam pattern that may be similar in width to a fog light, but the beam does not have a horizontal cutoff. Therefore they are also for off-road use only. As with spot lights, a mounting location high on the vehicle is ideal.View Available Part Numbers For This Product Line
Limited Lifetime Warranty
Install your Sierra Dual AmberWhite LED light bar yourself with the included mounting brackets, hardware, and wiring harness. A two position rocker switch is included and allows you to flip between white and amber light.