SnowSport Snow Plow Front Hitch 40131
- Pairs perfectly with SnowSport snow plows
- Works with other plows or accessories that use a 2” front hitch
- All-welded construction for durability and longevity
- Custom manufactured for each specific vehicle
- Mounts directly to the vehicle frame
- Receiver has 2" x 2" square opening
- Finished in a long-lasting black powdercoat
- Stress tested to ensure ability to take abuse on the road
- Withstood 1000 hour salt spray test per ASTM B117 standards
- Made in the USA - Jamestown, ND
The SnowSport Plow 2" front receiver hitch mount is a high quality solution to your snowplow and accessory mounting needs. It enables fast and convenient mounting and removal of your plow on the front of your vehicle, and has been extensively stress tested to ensure its durability. Thanks to its quality construction, you know the SnowSport Plow 2" front receiver hitch mount won't give up or fail when faced with a tough job.
Getting your SnowSport Plow 2" front receiver hitch mount installed is a snap. The time it takes may vary depending on your vehicle, but for most, it should be under an hour. Once it's securely installed, you'll be able to mount and unhitch your plow or other hitch-mounted accessories with ease.
The SnowSport Plow 2" front receiver hitch mount sports an appealing black finish and has been 1000 hour salt spray tested. It's also backed up by a lifetime warranty from its manufacturer and will not easily corrode. Order yours with free shipping today!
Your SnowSport receiver hitch mount can be mounted on truck right at home in your own garage. Most vehicle require no drilling but if your mount requires drilling, rest easy since it will be very minor and easy to accomplish. SnowSport includes simple and easy to follow instructions. For additional information or if you have any other questions, please feel free to give us a call toll free at 1-877-216-5446 or 701-253-5906.
Limited Lifetime Warranty
Related Articles (9)
Product Reviews Summary
|Price / Value||5.0|
|Ease of Installation||5.0|
|2 Customer Reviews|
|Perfect fit, great instructions. Top grade material, all parts and special tool furnished. Install was quick and easy.|
|First! Customer Service was very Helpful About This Snow Sport Product. Second! Do To Funds Available To Me at This Time I Decided To Purchase The Snowsport HD Utility Plow Piece By Piece, Seeing It's Only July Now And The Snow Won't Fly Around Here Until November. I Ordered The 2" Receiver Hitch, Just To Make Sure It Will Actually Fit On My New 2009 F-250 Ford Truck. The Hitch Came U.P.S. Within A Week, It Was Packaged In Bubble Rap, No Damage! Next I Took It Out To My Little Shop And Unrapped The Hitch And Wired It Down To My Floor Jack, I Then Started To Jack It Up To The Front Of My Truck, I Could See That It Would Fit Just Perfect But That I Would Have To Cut A Two Inch Slot In The Front Wind Shroud. I Then Opened The Installation Instructions And Layed Out The Installation Parts That Came With The Instructions, Everything Was There. I Then Cut About Three Inches Out Of The Front Wind Shroud And Jacked The Hitch Back Up And I Could See That Now I Could Start With The Install, I Lowed The Jack And Removed Two Bolts, One From Each Side As The Instructions Said, I Then Found The Two New Bolts And Lock Down Washers, I Jacked The Hitch Back Up Into Place And Installed The First Two Bolts, I Then Went Back And Grabbed The Four Carriage Bolts The Half Inch Fish Wire Flange Nuts And Square Hole Spacer. Next I Took One Carriage Bolt Put One Square Hole Spacer On The Carriage Bolt And Put The Half Inch Fishwire On The Bolt and Fished The Bolt Into The Frame Rail And Into Place, It Went A Lot Easier The I Thought It Would Go, I Then Took The Fishwire Off The Bolt And Installed The Lock Down Nut. I Did This Three More Times On The Other Bolts And Nuts And Slowly Snugged All The Bolts, I Then Took My Level and Leveled The Hitch With The Truck, I Then Tightened The Bolts Tighter. Next I Took Out My Torque Bar and Torqued All The Bolts Down To The Required Foot Pounds That The Instructions Called For. I Next Cut The Wire Tie Downs That I Had Tied The Hitch To The Floor Jack And Lowered The Jack And Removed It. Just About That Time A Friend Stopped By And Had A look And Said Great Job, Looks Good, He Also Said He Can't Wait To See The Hole Plow Sitting On The Front And How It Works, That Makes To Of Us I Said. All Together This Job Took Me About Two Hours To Do. I Am Also Disable With Back Problems, So A Fit Soul Should Be Able To Do This Install In About One Hour. God Bless! John From Westfield New York, Home Of Welch's Grape Juice And Many Fine Wineries!|